mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
5e49c57956
1)Changes - Rebased the patches for linux-4.4.7 - Added patch to fix spi nor fifo and dma support - Added patch to configure watchdog barktime 2)Testing Tested on IPQ AP148 Board: a. NOR boot and NAND boot b. ethernet network and ath10k wifi c. ubi sysupgrade UnTested dwc3 usb has not been validated on IPQ board(AP148) 3)Known Issues: Once we flash ubi image on AP148, and if we reset the board, uboot on first boot creates PEB and LEB for dynamic sized partitions, which is incorrect and not what linux expects which causes errors when trying to mount rootfs. In order to test this, we can use the below steps: a. Flash the ubi image on board and don't reset the board b. load the kernel fit image in RAM and boot from there. Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
81 lines
2.4 KiB
Diff
81 lines
2.4 KiB
Diff
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
@@ -476,15 +476,21 @@
|
|
|
|
clocks = <&gcc PCIE_A_CLK>,
|
|
<&gcc PCIE_H_CLK>,
|
|
- <&gcc PCIE_PHY_CLK>;
|
|
- clock-names = "core", "iface", "phy";
|
|
+ <&gcc PCIE_PHY_CLK>,
|
|
+ <&gcc PCIE_AUX_CLK>,
|
|
+ <&gcc PCIE_ALT_REF_CLK>;
|
|
+ clock-names = "core", "iface", "phy", "aux", "ref";
|
|
+
|
|
+ assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
|
|
+ assigned-clock-rates = <100000000>;
|
|
|
|
resets = <&gcc PCIE_ACLK_RESET>,
|
|
<&gcc PCIE_HCLK_RESET>,
|
|
<&gcc PCIE_POR_RESET>,
|
|
<&gcc PCIE_PCI_RESET>,
|
|
- <&gcc PCIE_PHY_RESET>;
|
|
- reset-names = "axi", "ahb", "por", "pci", "phy";
|
|
+ <&gcc PCIE_PHY_RESET>,
|
|
+ <&gcc PCIE_EXT_RESET>;
|
|
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
|
|
|
|
pinctrl-0 = <&pcie0_pins>;
|
|
pinctrl-names = "default";
|
|
@@ -522,15 +528,21 @@
|
|
|
|
clocks = <&gcc PCIE_1_A_CLK>,
|
|
<&gcc PCIE_1_H_CLK>,
|
|
- <&gcc PCIE_1_PHY_CLK>;
|
|
- clock-names = "core", "iface", "phy";
|
|
+ <&gcc PCIE_1_PHY_CLK>,
|
|
+ <&gcc PCIE_1_AUX_CLK>,
|
|
+ <&gcc PCIE_1_ALT_REF_CLK>;
|
|
+ clock-names = "core", "iface", "phy", "aux", "ref";
|
|
+
|
|
+ assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
|
|
+ assigned-clock-rates = <100000000>;
|
|
|
|
resets = <&gcc PCIE_1_ACLK_RESET>,
|
|
<&gcc PCIE_1_HCLK_RESET>,
|
|
<&gcc PCIE_1_POR_RESET>,
|
|
<&gcc PCIE_1_PCI_RESET>,
|
|
- <&gcc PCIE_1_PHY_RESET>;
|
|
- reset-names = "axi", "ahb", "por", "pci", "phy";
|
|
+ <&gcc PCIE_1_PHY_RESET>,
|
|
+ <&gcc PCIE_1_EXT_RESET>;
|
|
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
|
|
|
|
pinctrl-0 = <&pcie1_pins>;
|
|
pinctrl-names = "default";
|
|
@@ -568,15 +580,21 @@
|
|
|
|
clocks = <&gcc PCIE_2_A_CLK>,
|
|
<&gcc PCIE_2_H_CLK>,
|
|
- <&gcc PCIE_2_PHY_CLK>;
|
|
- clock-names = "core", "iface", "phy";
|
|
+ <&gcc PCIE_2_PHY_CLK>,
|
|
+ <&gcc PCIE_2_AUX_CLK>,
|
|
+ <&gcc PCIE_2_ALT_REF_CLK>;
|
|
+ clock-names = "core", "iface", "phy", "aux", "ref";
|
|
+
|
|
+ assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
|
|
+ assigned-clock-rates = <100000000>;
|
|
|
|
resets = <&gcc PCIE_2_ACLK_RESET>,
|
|
<&gcc PCIE_2_HCLK_RESET>,
|
|
<&gcc PCIE_2_POR_RESET>,
|
|
<&gcc PCIE_2_PCI_RESET>,
|
|
- <&gcc PCIE_2_PHY_RESET>;
|
|
- reset-names = "axi", "ahb", "por", "pci", "phy";
|
|
+ <&gcc PCIE_2_PHY_RESET>,
|
|
+ <&gcc PCIE_2_EXT_RESET>;
|
|
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
|
|
|
|
pinctrl-0 = <&pcie2_pins>;
|
|
pinctrl-names = "default";
|