mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-31 19:17:12 +00:00
3ad229db0b
This adds support for the MikroTik RouterBOARD RBD53iG-5HacD2HnD (hAP ac³), a indoor dual band, dual-radio 802.11ac wireless AP with external omnidirectional antennae, USB port, five 10/100/1000 Mbps Ethernet ports and PoE passthrough. See https://mikrotik.com/product/hap_ac3 for more info. Specifications: - SoC: Qualcomm Atheros IPQ4019 - RAM: 256 MB - Storage: 16 MB NOR + 128 MB NAND - Wireless: · Built-in IPQ4019 (SoC) 802.11b/g/n 2x2:2, 3 dBi antennae · Built-in IPQ4019 (SoC) 802.11a/n/ac 2x2:2, 5.5 dBi antennae - Ethernet: Built-in IPQ4019 (SoC, QCA8075) , 5x 1000/100/10 port, passive PoE in, PoE passtrough on port 5 - 1x USB Type A port Installation: 1. Boot the initramfs image via TFTP 2. Run "cat /proc/mtd" and look for "ubi" partition mtd device number, ex. "mtd1" 3. Use ubiformat to remove MikroTik specific UBI volumes * Detach the UBI partition by running: "ubidetach -d 0" * Format the partition by running: "ubiformat /dev/mtdN -y" Replace mtdN with the correct mtd index from step 2. 3. Flash the sysupgrade image using "sysupgrade -n" Signed-off-by: Robert Marko <robimarko@gmail.com> Tested-by: Mark Birss <markbirss@gmail.com> Tested-by: Michael Büchler <michael.buechler@posteo.net> Tested-by: Alex Tomkins <tomkins@darkzone.net>
89 lines
3.0 KiB
Plaintext
89 lines
3.0 KiB
Plaintext
#
|
|
# Copyright (C) 2015 OpenWrt.org
|
|
#
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
board_config_update
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
alfa-network,ap120c-ac)
|
|
ucidef_set_led_netdev "wan" "WAN" "amber:wan" "eth1"
|
|
;;
|
|
asus,rt-ac58u)
|
|
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
|
|
ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x1e"
|
|
;;
|
|
avm,fritzbox-4040)
|
|
ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt"
|
|
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
|
|
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
|
|
;;
|
|
avm,fritzbox-7530 |\
|
|
glinet,gl-b1300)
|
|
ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
|
|
;;
|
|
edgecore,oap100)
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
|
|
;;
|
|
engenius,eap1300)
|
|
ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "yellow:wlan5g" "phy1tpt"
|
|
ucidef_set_led_default "mesh" "MESH" "blue:mesh" "0"
|
|
;;
|
|
engenius,eap2200)
|
|
ucidef_set_led_netdev "lan1" "LAN1" "blue:lan1" "eth0"
|
|
ucidef_set_led_netdev "lan2" "LAN2" "blue:lan2" "eth1"
|
|
;;
|
|
engenius,ens620ext)
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
|
|
ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
|
|
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
|
|
;;
|
|
mikrotik,hap-ac3)
|
|
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
|
|
ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x10"
|
|
ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x08"
|
|
ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x04"
|
|
ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x02"
|
|
ucidef_set_led_gpio "poe" "POE" "red:poe" "452" "0"
|
|
;;
|
|
mikrotik,sxtsq-5-ac)
|
|
ucidef_set_rssimon "wlan0" "200000" "1"
|
|
ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
|
|
ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "21" "100"
|
|
ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "41" "100"
|
|
ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "61" "100"
|
|
ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "81" "100"
|
|
;;
|
|
mobipromo,cm520-79f)
|
|
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
|
|
ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"
|
|
ucidef_set_led_switch "lan2" "LAN2" "blue:lan2" "switch0" "0x08"
|
|
;;
|
|
netgear,ex6100v2 |\
|
|
netgear,ex6150v2)
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:router" "phy0tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:client" "phy1tpt"
|
|
;;
|
|
qxwlan,e2600ac-c1 |\
|
|
qxwlan,e2600ac-c2)
|
|
ucidef_set_led_wlan "wlan2g" "WLAN0" "green:wlan0" "phy0tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN1" "green:wlan1" "phy1tpt"
|
|
;;
|
|
zyxel,nbg6617 |\
|
|
zyxel,wre6606)
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|