openwrt/target/linux/bcm27xx/patches-5.15/950-0114-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch
Hauke Mehrtens ecf390c8ff kernel: bump 5.15 to 5.15.152
Removed because it is upstream:
generic/backport-5.15/081-v5.17-regmap-allow-to-define-reg_update_bits-for-no-bus.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=fbddd48f1456db32b675fad95a902de38345902a

Manual changes needed:
bcm27xx/patches-5.15/950-0470-sound-usb-add-device-quirks-for-A4Tech-FHD-1080p-web.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 2ec025d554)
2024-03-29 14:06:15 +01:00

46 lines
1.7 KiB
Diff

From 65b91d9a2af917b88d5381cd6a3d7bc92723c0f6 Mon Sep 17 00:00:00 2001
From: Joshua Emele <jemele@acm.org>
Date: Wed, 7 Nov 2018 16:07:40 -0800
Subject: [PATCH] lan78xx: Debounce link events to minimize poll storm
The bInterval is set to 4 (i.e. 8 microframes => 1ms) and the only bit
that the driver pays attention to is "link was reset". If there's a
flapping status bit in that endpoint data, (such as if PHY negotiation
needs a few tries to get a stable link) then polling at a slower rate
would act as a de-bounce.
See: https://github.com/raspberrypi/linux/issues/2447
---
drivers/net/usb/lan78xx.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -454,6 +454,11 @@ static bool enable_tso;
module_param(enable_tso, bool, 0644);
MODULE_PARM_DESC(enable_tso, "Enables TCP segmentation offload");
+#define INT_URB_MICROFRAMES_PER_MS 8
+static int int_urb_interval_ms = 8;
+module_param(int_urb_interval_ms, int, 0);
+MODULE_PARM_DESC(int_urb_interval_ms, "Override usb interrupt urb interval");
+
static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data)
{
u32 *buf;
@@ -4125,7 +4130,13 @@ static int lan78xx_probe(struct usb_inte
netdev->max_mtu = MAX_SINGLE_PACKET_SIZE;
netif_set_gso_max_size(netdev, MAX_SINGLE_PACKET_SIZE - MAX_HEADER);
- period = ep_intr->desc.bInterval;
+ if (int_urb_interval_ms <= 0)
+ period = ep_intr->desc.bInterval;
+ else
+ period = int_urb_interval_ms * INT_URB_MICROFRAMES_PER_MS;
+
+ netif_notice(dev, probe, netdev, "int urb period %d\n", period);
+
maxp = usb_maxpacket(dev->udev, dev->pipe_intr, 0);
buf = kmalloc(maxp, GFP_KERNEL);
if (buf) {