openwrt/target/linux/layerscape/patches-5.4/302-dts-0070-arm64-dts-ls1012a-ls1043a-ls1046a-ls1088a-ls208xa-re.patch
Hauke Mehrtens 3da861ccca kernel: bump 5.4 to 5.4.111
Refreshed all patches.

The following patches were manually changed:
* 610-netfilter_match_bypass_default_checks.patch
* 611-netfilter_match_bypass_default_table.patch
* 802-can-0002-can-rx-offload-fix-long-lines.patch
* 802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch
* 802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch
* 802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch
* 802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch
* 802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch

The can-dev.ko model was moved in the upstream kernel.

Compile-tested on: x86/64, armvirt/64, ath79/generic
Runtime-tested on: x86/64, armvirt/64, ath79/generic

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-04-11 17:35:12 +02:00

298 lines
7.2 KiB
Diff

From c97c6ebf6fd6a6ff72bd7d58a12de0c07f14953e Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Thu, 27 Jun 2019 15:02:44 +0800
Subject: [PATCH] arm64: dts: ls1012a/ls1043a/ls1046a/ls1088a/ls208xa: replace
ftm0 with ftm_alarm0
The patch replaces ftm0 with ftm_alarm0 DT node
- replace ftm0 with ftm_alarm0
- add new rcpm node
- remove old rcpm node
- aliases ftm_alarm0 as rtc1
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 23 +++++++++++----------
.../boot/dts/freescale/fsl-ls1043a-qds-sdk.dts | 2 +-
.../boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 24 +++++++++++++---------
.../boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts | 2 +-
.../boot/dts/freescale/fsl-ls1046a-qds-sdk.dts | 2 +-
.../boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 24 ++++++++++++++--------
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++------
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 12 +++++++++--
10 files changed, 70 insertions(+), 43 deletions(-)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -23,6 +23,7 @@
rtic-c = &rtic_c;
rtic-d = &rtic_d;
sec-mon = &sec_mon;
+ rtc1 = &ftm_alarm0;
};
cpus {
@@ -290,15 +291,21 @@
#thermal-sensor-cells = <1>;
};
- ftm0: ftm0@29d0000 {
- compatible = "fsl,ftm-alarm";
- reg = <0x0 0x29d0000 0x0 0x10000>,
- <0x0 0x1ee2140 0x0 0x4>;
- reg-names = "ftm", "FlexTimer1";
+ rcpm: rcpm@1ee2140 {
+ compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
+ reg = <0x0 0x1ee2140 0x0 0x4>;
+ #fsl,rcpm-wakeup-cells = <1>;
+ };
+
+ ftm_alarm0: timer@29d0000 {
+ compatible = "fsl,ls1012a-ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>;
+ fsl,rcpm-wakeup = <&rcpm 0x20000>;
interrupts = <0 86 0x4>;
big-endian;
};
+
i2c0: i2c@2180000 {
compatible = "fsl,vf610-i2c", "fsl,ls1012a-vf610-i2c";
#address-cells = <1>;
@@ -497,12 +504,6 @@
<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
-
- rcpm: rcpm@1ee2000 {
- compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1";
- reg = <0x0 0x1ee2000 0x0 0x1000>;
- fsl,#rcpm-wakeup-cells = <1>;
- };
};
reserved-memory {
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
@@ -226,7 +226,7 @@ pcie@3600000 {
dma-coherent;
};
-&ftm0 {
+&ftm_alarm0 {
dma-coherent;
};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
@@ -221,7 +221,7 @@ pcie@3600000 {
dma-coherent;
};
-&ftm0 {
+&ftm_alarm0 {
dma-coherent;
};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -27,6 +27,7 @@
ethernet4 = &enet4;
ethernet5 = &enet5;
ethernet6 = &enet6;
+ rtc1 = &ftm_alarm0;
};
cpus {
@@ -661,16 +662,6 @@
status = "disabled";
};
- ftm0: ftm0@29d0000 {
- compatible = "fsl,ftm-alarm";
- reg = <0x0 0x29d0000 0x0 0x10000>,
- <0x0 0x1ee2140 0x0 0x4>;
- reg-names = "ftm", "FlexTimer1";
- interrupts = <0 86 0x4>;
- big-endian;
- status = "okay";
- };
-
wdog0: wdog@2ad0000 {
compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
@@ -875,6 +866,19 @@
big-endian;
};
+ rcpm: rcpm@1ee2140 {
+ compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+";
+ reg = <0x0 0x1ee2140 0x0 0x4>;
+ #fsl,rcpm-wakeup-cells = <1>;
+ };
+
+ ftm_alarm0: timer@29d0000 {
+ compatible = "fsl,ls1043a-ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>;
+ fsl,rcpm-wakeup = <&rcpm 0x20000>;
+ interrupts = <0 86 0x4>;
+ big-endian;
+ };
};
firmware {
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts
@@ -196,7 +196,7 @@
dma-coherent;
};
-&ftm0 {
+&ftm_alarm0 {
dma-coherent;
};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
@@ -223,7 +223,7 @@ pcie@3600000 {
dma-coherent;
};
-&ftm0 {
+&ftm_alarm0 {
dma-coherent;
};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
@@ -228,7 +228,7 @@ pcie@3600000 {
dma-coherent;
};
-&ftm0 {
+&ftm_alarm0 {
dma-coherent;
};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -28,6 +28,7 @@
ethernet5 = &enet5;
ethernet6 = &enet6;
ethernet7 = &enet7;
+ rtc1 = &ftm_alarm0;
};
cpus {
@@ -561,15 +562,6 @@
status = "disabled";
};
- ftm0: ftm0@29d0000 {
- compatible = "fsl,ftm-alarm";
- reg = <0x0 0x29d0000 0x0 0x10000>,
- <0x0 0x1ee2140 0x0 0x4>;
- reg-names = "ftm", "FlexTimer1";
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- big-endian;
- };
-
wdog0: watchdog@2ad0000 {
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
@@ -811,6 +803,20 @@
queue-sizes = <64 64>;
big-endian;
};
+
+ rcpm: rcpm@1ee208c {
+ compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
+ reg = <0x0 0x1ee208c 0x0 0x4>;
+ #fsl,rcpm-wakeup-cells = <1>;
+ };
+
+ ftm_alarm0: timer@29d0000 {
+ compatible = "fsl,ls1046a-ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>;
+ fsl,rcpm-wakeup = <&rcpm 0x20000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ big-endian;
+ };
};
reserved-memory {
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -18,6 +18,7 @@
aliases {
crypto = &crypto;
+ rtc1 = &ftm_alarm0;
};
cpus {
@@ -339,12 +340,6 @@
status = "disabled";
};
- ftm0: ftm0@2800000 {
- compatible = "fsl,ftm-alarm";
- reg = <0x0 0x2800000 0x0 0x10000>;
- interrupts = <0 44 4>;
- };
-
i2c0: i2c@2000000 {
compatible = "fsl,vf610-i2c", "fsl,ls1088a-vf610-i2c";
#address-cells = <1>;
@@ -792,6 +787,19 @@
};
};
};
+
+ rcpm: rcpm@1e34040 {
+ compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
+ reg = <0x0 0x1e34040 0x0 0x18>;
+ #fsl,rcpm-wakeup-cells = <6>;
+ };
+
+ ftm_alarm0: timer@2800000 {
+ compatible = "fsl,ls1088a-ftm-alarm";
+ reg = <0x0 0x2800000 0x0 0x10000>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+ interrupts = <0 44 4>;
+ };
};
firmware {
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -24,6 +24,7 @@
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
+ rtc1 = &ftm_alarm0;
};
cpu: cpus {
@@ -757,9 +758,16 @@
interrupts = <0 12 4>;
};
- ftm0: ftm0@2800000 {
- compatible = "fsl,ftm-alarm";
+ rcpm: rcpm@1e34040 {
+ compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
+ reg = <0x0 0x1e34040 0x0 0x18>;
+ #fsl,rcpm-wakeup-cells = <6>;
+ };
+
+ ftm_alarm0: timer@2800000 {
+ compatible = "fsl,ls208xa-ftm-alarm";
reg = <0x0 0x2800000 0x0 0x10000>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
interrupts = <0 44 4>;
};
};