Weiping Yang 9945d05171 ipq40xx: add support for GL.iNet GL-A1300 ... Specifications: SOC: Qualcomm IPQ4018 (DAKOTA) ARM Quad-Core RAM: 256 MiB FLASH1: 4 MiB NOR FLASH2: 128 MiB NAND ETH: Qualcomm QCA8075 WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2 WLAN2: Qualcomm Atheros QCA4018 5G 802.11n/ac W2 2x2 USB: 1 x USB 3.0 port Button: 1 x Reset button Switch: 1 x Mode switch LED: 1 x Blue LED + 1 x White LED Install via uboot tftp or uboot web failsafe. By uboot tftp: (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-generic-glinet_gl-a1300-squashfs-nand-factory.ubi (IPQ40xx) # nand erase 0 0x8000000 (IPQ40xx) # nand write 0x84000000 0 $filesize By uboot web failsafe: Push the reset button for 10 seconds util the power led flash faster, then use broswer to access http://192.168.1.1 Afterwards upgrade can use sysupgrade image. Signed-off-by: Weiping Yang <weiping.yang@gl-inet.com>		2022-11-09 23:34:37 +01:00
..
base-files	ipq40xx: add support for GL.iNet GL-A1300	2022-11-09 23:34:37 +01:00
chromium	ipq40xx: cut ath10k board file for mikrotik subtarget	2022-05-27 14:15:09 +02:00
files	ipq40xx: add support for GL.iNet GL-A1300	2022-11-09 23:34:37 +01:00
generic	ipq40xx: cut ath10k board file for mikrotik subtarget	2022-05-27 14:15:09 +02:00
image	ipq40xx: add support for GL.iNet GL-A1300	2022-11-09 23:34:37 +01:00
mikrotik	ipq40xx: cut ath10k board file for mikrotik subtarget	2022-05-27 14:15:09 +02:00
patches-5.10	kernel: bump 5.10 to 5.10.150	2022-10-30 17:52:42 +01:00
patches-5.15	kernel: bump 5.15 to 5.15.75	2022-10-30 17:54:59 +01:00
config-5.10	ipq40xx: enable ethernet and DSA driver combo	2022-10-02 23:04:38 +02:00
config-5.15	ipq40xx: enable ethernet and DSA driver combo	2022-10-02 23:04:38 +02:00
Makefile	ipq40xx: drop ESSEDMA + AR40xx	2022-10-02 23:04:38 +02:00