openwrt/target/linux/ramips/dts/mt7621_ubnt_unifi-nanohd.dts
DENG Qingfang 66984646c2 ramips: mt7621: update pinctrl nodes
Upstream GPIO driver uses "groups" "function" properties

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-04-04 14:13:05 +08:00

142 lines
2.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "ubnt,unifi-nanohd", "mediatek,mt7621-soc";
model = "Ubiquiti UniFi nanoHD";
aliases {
led-boot = &led_white;
led-failsafe = &led_white;
led-running = &led_blue;
led-upgrade = &led_blue;
label-mac-device = &ethernet;
};
chosen {
bootargs = "console=ttyS0,115200";
};
leds {
compatible = "gpio-leds";
led_blue: dome_blue {
label = "nanohd:blue:dome";
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
};
led_white: dome_white {
label = "nanohd:white:dome";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "mx25l25635f", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x60000>;
read-only;
};
partition@60000 {
label = "u-boot-env";
reg = <0x60000 0x10000>;
read-only;
};
factory: partition@70000 {
label = "factory";
reg = <0x70000 0x10000>;
read-only;
};
eeprom: partition@80000 {
label = "eeprom";
reg = <0x80000 0x10000>;
read-only;
};
partition@90000 {
label = "bs";
reg = <0x90000 0x10000>;
};
partition@a0000 {
label = "cfg";
reg = <0xa0000 0x100000>;
read-only;
};
partition@1a0000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x1a0000 0xf30000>;
};
partition@10d0000 {
label = "kernel1";
reg = <0x10d0000 0xf30000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
reg = <0x0 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
};
};
&pcie1 {
wifi@0,0 {
reg = <0x0 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
};
};
&ethernet {
mtd-mac-address = <&eeprom 0x0>;
};
&state_default {
gpio {
groups = "i2c", "uart2";
function = "gpio";
};
};