mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
15a14cf166
The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
68 lines
2.5 KiB
Diff
68 lines
2.5 KiB
Diff
From b0f227f32f898bdf52f4ecafc83d1e2f1d6ee6ec Mon Sep 17 00:00:00 2001
|
|
From: Yutang Jiang <yutang.jiang@nxp.com>
|
|
Date: Thu, 27 Oct 2016 23:47:43 +0800
|
|
Subject: [PATCH 92/93] armv8: set openwrt/lede default boot env for
|
|
ls1012ardb
|
|
|
|
Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
|
|
---
|
|
include/configs/ls1012a_common.h | 28 +++++++++++++++++++++++++++-
|
|
1 file changed, 27 insertions(+), 1 deletion(-)
|
|
|
|
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
|
|
index 0489492..b23ba4f 100644
|
|
--- a/include/configs/ls1012a_common.h
|
|
+++ b/include/configs/ls1012a_common.h
|
|
@@ -130,6 +130,24 @@
|
|
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
|
|
+#define WRTBOOT_DEFAULT "pfe stop && sf probe 0:0 && setenv bootargs " \
|
|
+ "root=/dev/mtdblock5 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 " \
|
|
+ "earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1M(rcw)," \
|
|
+ "1M(u-boot),1M(u-boot-env),1M(dtb),5M(kernel),23M(rootfs),32M(user)" \
|
|
+ " && sf read $fdtaddr 0x300000 100000 && " \
|
|
+ "sf read $loadaddr 0x400000 500000 && bootm $loadaddr - $fdtaddr"
|
|
+
|
|
+#define WRTBOOT_EXT4RFS "pfe stop && sf probe 0:0 && setenv bootargs " \
|
|
+ "root=/dev/mtdblock5 rootfstype=ext4 noinitrd console=ttyS0,115200 " \
|
|
+ "earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1M(rcw)," \
|
|
+ "1M(u-boot),1M(u-boot-env),1M(dtb),5M(kernel),23M(ext4rfs),32M(user)" \
|
|
+ " && sf read $fdtaddr 0x300000 100000 && " \
|
|
+ "sf read $loadaddr 0x400000 500000 && bootm $loadaddr - $fdtaddr"
|
|
+
|
|
+#define WRTUPDATE_DEFAULT " sf probe 0:0 && tftp 0xa0000000 <tftp_folder>/" \
|
|
+ "lede-layerscape-64b-ls1012ardb-squashfs-firmware.ext4.bin && protect off all" \
|
|
+ " && sf erase 0 $filesize && sf write 0xa0000000 0 $filesize; reset"
|
|
+
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"initrd_high=0xffffffff\0" \
|
|
@@ -144,6 +162,12 @@
|
|
"kernel_start=0xa00000\0" \
|
|
"kernel_load=0xa0000000\0" \
|
|
"kernel_size=0x2800000\0" \
|
|
+ "loadaddr=82000000\0" \
|
|
+ "ramdiskaddr=88000000\0" \
|
|
+ "fdtaddr=8f000000\0" \
|
|
+ "wrtboot=" WRTBOOT_DEFAULT "\0" \
|
|
+ "wrtboot_ext4rfs=" WRTBOOT_EXT4RFS "\0" \
|
|
+ "wrtupdate=" WRTUPDATE_DEFAULT "\0" \
|
|
"console=ttyAMA0,38400n8\0"
|
|
|
|
#ifdef CONFIG_EMU
|
|
@@ -158,7 +182,9 @@
|
|
"$kernel_start $kernel_size && "\
|
|
"bootm $kernel_load"
|
|
#endif
|
|
-#define CONFIG_BOOTDELAY 10
|
|
+#define CONFIG_BOOTDELAY 3
|
|
+#undef CONFIG_BOOTCOMMAND
|
|
+#define CONFIG_BOOTCOMMAND "run wrtboot_ext4rfs"
|
|
|
|
/* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
|
--
|
|
1.7.9.5
|
|
|