mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
15a14cf166
The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
33 lines
1005 B
Diff
33 lines
1005 B
Diff
From 367c16da9255dacf6440f3c72c01c197cfb1bbe8 Mon Sep 17 00:00:00 2001
|
|
From: Sumit Garg <sumit.garg@nxp.com>
|
|
Date: Wed, 11 May 2016 12:44:35 -0400
|
|
Subject: [PATCH 30/93] ARMv8: Enable CPUECTLR.SMPEN for data coherency
|
|
|
|
Data coherency is enabled only when the CPUECTLR.SMPEN bit is set.
|
|
The SMPEN bit should be set before enabling the data cache. If not
|
|
enabled, the cache is not coherent with other cores and data
|
|
corruption could occur. It also enables core level cache snooping.
|
|
|
|
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
|
|
---
|
|
arch/arm/cpu/armv8/start.S | 3 +++
|
|
1 file changed, 3 insertions(+)
|
|
|
|
diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
|
|
index 235213f..9703f6b 100644
|
|
--- a/arch/arm/cpu/armv8/start.S
|
|
+++ b/arch/arm/cpu/armv8/start.S
|
|
@@ -70,6 +70,9 @@ reset:
|
|
mov x0, #3 << 20
|
|
msr cpacr_el1, x0 /* Enable FP/SIMD */
|
|
0:
|
|
+ /* Enalbe SMPEN bit */
|
|
+ mov x0, #0x40
|
|
+ msr s3_1_c15_c2_1, x0
|
|
|
|
/* Apply ARM core specific erratas */
|
|
bl apply_core_errata
|
|
--
|
|
1.7.9.5
|
|
|