ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-21 22:47:56 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
66177c081f
openwrt/target/linux/bcm27xx/patches-6.6/950-0071-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch
Álvaro Fernández Rojas 8c405cdccc bcm27xx: add 6.6 kernel patches 
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.34..rpi-6.1.y

Some patches needed rebasing and, as usual, the applied and reverted, wireless
drivers, Github workflows, READMEs and defconfigs patches were removed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-06-18 18:52:49 +02:00

1259 lines
41 KiB
Diff
Raw Blame History

From a73f2a05b8c2a221a5ccdf674cd58ef3ae4508de Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
Date: Sat, 3 Oct 2015 22:22:55 +0200
Subject: [PATCH 0071/1085] dmaengine: bcm2835: Load driver early and support
legacy API
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Load driver early since at least bcm2708_fb doesn't support deferred
probing and even if it did, we don't want the video driver deferred.
Support the legacy DMA API which is needed by bcm2708_fb.
Don't mask out channel 2.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
bcm2835-dma: Add support for per-channel flags
Add the ability to interpret the high bits of the dreq specifier as
flags to be included in the DMA_CS register. The motivation for this
change is the ability to set the DISDEBUG flag for SD card transfers
to avoid corruption when using the VPU debugger.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-dma: Add proper 40-bit DMA support
BCM2711 has 4 DMA channels with a 40-bit address range, allowing them
to access the full 4GB of memory on a Pi 4.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-dma: Derive slave DMA addresses correctly
Slave addresses for DMA are meant to be supplied as physical addresses
(contrary to what struct snd_dmaengine_dai_dma_data does). It is up to
the DMA controller driver to perform the translation based on its own
view of the world, as described in Device Tree.
Now that the Pi Device Trees have the correct peripheral mappings,
replace the hacky address munging with phys_to_dma().
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
bcm2835-dma: Add NO_WAIT_RESP flag
Use bit 27 of the dreq value (the second cell of the DT DMA descriptor)
to request that the WAIT_RESP bit is not set.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
bcm2835-dma: Advertise the full DMA range
Unless the DMA mask is set wider than 32 bits, DMA mapping will use a
bounce buffer.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
bcm2835-dma: only reserve channel 0 if legacy dma driver is enabled
If CONFIG_DMA_BCM2708 isn't enabled there's no need to mask out
one of the already scarce DMA channels.
Signed-off-by: Matthias Reichl <hias@horus.com>
bcm2835-dma: Avoid losing CS flags after interrupt
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
bcm2835-dma: Add bcm2835-dma: Add DMA_WIDE_SOURCE and DMA_WIDE_DEST flags
Use (reserved) bits 24 and 25 of the dreq value
(the second cell of the DT DMA descriptor) to request
that wide source reads or wide dest writes are required
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
dmaengine: bcm2835: Fix position reporting for 40 bits channels
For 40 bits channels, the position is reported by reading the upper byte
in the SRCI/DESTI registers. However the driver adds that upper byte
with an 8-bits left shift, while it should be 32.
Fixes: 9a52a9918306 ("bcm2835-dma: Add proper 40-bit DMA support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
dmaengine: bcm2835: Use to_bcm2711_cbaddr where relevant
bcm2711_dma40_memcpy has some code strictly equivalent to the
to_bcm2711_cbaddr() function. Let's use it instead.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
dmaengine: bcm2835: Fix descriptors usage for 40-bits channels
The bcm2835_dma_create_cb_chain() function is in charge of building up
the descriptors chain for a given transfer.
It was initially supporting only the BCM2835-style DMA controller, and
was later expanded to support controllers with 40-bits channels that use
a different descriptor layout.
However, some part of the function only use the old style descriptor,
even when building a chain of new-style descriptors, resulting in weird
bugs.
Fixes: 9a52a9918306 ("bcm2835-dma: Add proper 40-bit DMA support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
bcm2835-dma: Fix WAIT_RESP on memcpy
It goes in info not extra
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
bcm2835-dma: Fix dma_abort for 40-bit channels
It wasn't aborting the transfer and caused stop/start
of hdmi audio dma to be unreliable.
New sequence approved by Broadcom.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
bcm2835-dma: Fix dma_abort for non-40bit channels
The sequence we were doing was not safe.
Clearing CS meant BCM2835_DMA_WAIT_FOR_WRITES was cleared
and so polling BCM2835_DMA_WAITING_FOR_WRITES has no benefit
Broadcom have provided a recommended sequence to abort
a dma lite channel, so switch to that.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
bcm2835-dma: Support dma flags for multi-beat burst
Add a control bit to enable a multi-beat burst on a DMA.
This improves DMA performance and is required for HDMI audio.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
bcm2835-dma: Need to keep PROT bits set in CS on 40bit controller
Resetting them to zero puts DMA channel into secure mode
which makes further accesses impossible
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
---
drivers/dma/Kconfig | 2 +-
drivers/dma/bcm2835-dma.c | 714 ++++++++++++++++++++++++++++++++------
2 files changed, 602 insertions(+), 114 deletions(-)
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -136,7 +136,7 @@ config BCM_SBA_RAID
config DMA_BCM2835
tristate "BCM2835 DMA engine support"
- depends on ARCH_BCM2835
+ depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
--- a/drivers/dma/bcm2835-dma.c
+++ b/drivers/dma/bcm2835-dma.c
@@ -18,6 +18,7 @@
* Copyright 2012 Marvell International Ltd.
*/
#include <linux/dmaengine.h>
+#include <linux/dma-direct.h>
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
#include <linux/err.h>
@@ -25,6 +26,7 @@
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/platform_data/dma-bcm2708.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/io.h>
@@ -36,6 +38,13 @@
#define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14
#define BCM2835_DMA_CHAN_NAME_SIZE 8
+#define BCM2835_DMA_BULK_MASK BIT(0)
+#define BCM2711_DMA_MEMCPY_CHAN 14
+
+struct bcm2835_dma_cfg_data {
+ u64 dma_mask;
+ u32 chan_40bit_mask;
+};
/**
* struct bcm2835_dmadev - BCM2835 DMA controller
@@ -48,6 +57,7 @@ struct bcm2835_dmadev {
struct dma_device ddev;
void __iomem *base;
dma_addr_t zero_page;
+ const struct bcm2835_dma_cfg_data *cfg_data;
};
struct bcm2835_dma_cb {
@@ -60,6 +70,17 @@ struct bcm2835_dma_cb {
uint32_t pad[2];
};
+struct bcm2711_dma40_scb {
+ uint32_t ti;
+ uint32_t src;
+ uint32_t srci;
+ uint32_t dst;
+ uint32_t dsti;
+ uint32_t len;
+ uint32_t next_cb;
+ uint32_t rsvd;
+};
+
struct bcm2835_cb_entry {
struct bcm2835_dma_cb *cb;
dma_addr_t paddr;
@@ -80,6 +101,7 @@ struct bcm2835_chan {
unsigned int irq_flags;
bool is_lite_channel;
+ bool is_40bit_channel;
};
struct bcm2835_desc {
@@ -136,11 +158,37 @@ struct bcm2835_desc {
#define BCM2835_DMA_S_WIDTH BIT(9) /* 128bit writes if set */
#define BCM2835_DMA_S_DREQ BIT(10) /* enable SREQ for source */
#define BCM2835_DMA_S_IGNORE BIT(11) /* ignore source reads - read 0 */
-#define BCM2835_DMA_BURST_LENGTH(x) ((x & 15) << 12)
+#define BCM2835_DMA_BURST_LENGTH(x) (((x) & 15) << 12)
+#define BCM2835_DMA_GET_BURST_LENGTH(x) (((x) >> 12) & 15)
+#define BCM2835_DMA_CS_FLAGS(x) (x & (BCM2835_DMA_PRIORITY(15) | \
+ BCM2835_DMA_PANIC_PRIORITY(15) | \
+ BCM2835_DMA_WAIT_FOR_WRITES | \
+ BCM2835_DMA_DIS_DEBUG))
#define BCM2835_DMA_PER_MAP(x) ((x & 31) << 16) /* REQ source */
#define BCM2835_DMA_WAIT(x) ((x & 31) << 21) /* add DMA-wait cycles */
#define BCM2835_DMA_NO_WIDE_BURSTS BIT(26) /* no 2 beat write bursts */
+/* A fake bit to request that the driver doesn't set the WAIT_RESP bit. */
+#define BCM2835_DMA_NO_WAIT_RESP BIT(27)
+#define WAIT_RESP(x) ((x & BCM2835_DMA_NO_WAIT_RESP) ? \
+ 0 : BCM2835_DMA_WAIT_RESP)
+
+/* A fake bit to request that the driver requires wide reads */
+#define BCM2835_DMA_WIDE_SOURCE BIT(24)
+#define WIDE_SOURCE(x) ((x & BCM2835_DMA_WIDE_SOURCE) ? \
+ BCM2835_DMA_S_WIDTH : 0)
+
+/* A fake bit to request that the driver requires wide writes */
+#define BCM2835_DMA_WIDE_DEST BIT(25)
+#define WIDE_DEST(x) ((x & BCM2835_DMA_WIDE_DEST) ? \
+ BCM2835_DMA_D_WIDTH : 0)
+
+/* A fake bit to request that the driver requires multi-beat burst */
+#define BCM2835_DMA_BURST BIT(30)
+#define BURST_LENGTH(x) ((x & BCM2835_DMA_BURST) ? \
+ BCM2835_DMA_BURST_LENGTH(3) : 0)
+
+
/* debug register bits */
#define BCM2835_DMA_DEBUG_LAST_NOT_SET_ERR BIT(0)
#define BCM2835_DMA_DEBUG_FIFO_ERR BIT(1)
@@ -165,13 +213,124 @@ struct bcm2835_desc {
#define BCM2835_DMA_DATA_TYPE_S128 16
/* Valid only for channels 0 - 14, 15 has its own base address */
-#define BCM2835_DMA_CHAN(n) ((n) << 8) /* Base address */
+#define BCM2835_DMA_CHAN_SIZE 0x100
+#define BCM2835_DMA_CHAN(n) ((n) * BCM2835_DMA_CHAN_SIZE) /* Base address */
#define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n))
/* the max dma length for different channels */
#define MAX_DMA_LEN SZ_1G
#define MAX_LITE_DMA_LEN (SZ_64K - 4)
+/* 40-bit DMA support */
+#define BCM2711_DMA40_CS 0x00
+#define BCM2711_DMA40_CB 0x04
+#define BCM2711_DMA40_DEBUG 0x0c
+#define BCM2711_DMA40_TI 0x10
+#define BCM2711_DMA40_SRC 0x14
+#define BCM2711_DMA40_SRCI 0x18
+#define BCM2711_DMA40_DEST 0x1c
+#define BCM2711_DMA40_DESTI 0x20
+#define BCM2711_DMA40_LEN 0x24
+#define BCM2711_DMA40_NEXT_CB 0x28
+#define BCM2711_DMA40_DEBUG2 0x2c
+
+#define BCM2711_DMA40_ACTIVE BIT(0)
+#define BCM2711_DMA40_END BIT(1)
+#define BCM2711_DMA40_INT BIT(2)
+#define BCM2711_DMA40_DREQ BIT(3) /* DREQ state */
+#define BCM2711_DMA40_RD_PAUSED BIT(4) /* Reading is paused */
+#define BCM2711_DMA40_WR_PAUSED BIT(5) /* Writing is paused */
+#define BCM2711_DMA40_DREQ_PAUSED BIT(6) /* Is paused by DREQ flow control */
+#define BCM2711_DMA40_WAITING_FOR_WRITES BIT(7) /* Waiting for last write */
+// we always want to run in supervisor mode
+#define BCM2711_DMA40_PROT (BIT(8)|BIT(9))
+#define BCM2711_DMA40_ERR BIT(10)
+#define BCM2711_DMA40_QOS(x) (((x) & 0x1f) << 16)
+#define BCM2711_DMA40_PANIC_QOS(x) (((x) & 0x1f) << 20)
+#define BCM2711_DMA40_TRANSACTIONS BIT(25)
+#define BCM2711_DMA40_WAIT_FOR_WRITES BIT(28)
+#define BCM2711_DMA40_DISDEBUG BIT(29)
+#define BCM2711_DMA40_ABORT BIT(30)
+#define BCM2711_DMA40_HALT BIT(31)
+
+#define BCM2711_DMA40_CS_FLAGS(x) (x & (BCM2711_DMA40_QOS(15) | \
+ BCM2711_DMA40_PANIC_QOS(15) | \
+ BCM2711_DMA40_WAIT_FOR_WRITES | \
+ BCM2711_DMA40_DISDEBUG))
+
+/* Transfer information bits */
+#define BCM2711_DMA40_INTEN BIT(0)
+#define BCM2711_DMA40_TDMODE BIT(1) /* 2D-Mode */
+#define BCM2711_DMA40_WAIT_RESP BIT(2) /* wait for AXI write to be acked */
+#define BCM2711_DMA40_WAIT_RD_RESP BIT(3) /* wait for AXI read to complete */
+#define BCM2711_DMA40_PER_MAP(x) ((x & 31) << 9) /* REQ source */
+#define BCM2711_DMA40_S_DREQ BIT(14) /* enable SREQ for source */
+#define BCM2711_DMA40_D_DREQ BIT(15) /* enable DREQ for destination */
+#define BCM2711_DMA40_S_WAIT(x) ((x & 0xff) << 16) /* add DMA read-wait cycles */
+#define BCM2711_DMA40_D_WAIT(x) ((x & 0xff) << 24) /* add DMA write-wait cycles */
+
+/* debug register bits */
+#define BCM2711_DMA40_DEBUG_WRITE_ERR BIT(0)
+#define BCM2711_DMA40_DEBUG_FIFO_ERR BIT(1)
+#define BCM2711_DMA40_DEBUG_READ_ERR BIT(2)
+#define BCM2711_DMA40_DEBUG_READ_CB_ERR BIT(3)
+#define BCM2711_DMA40_DEBUG_IN_ON_ERR BIT(8)
+#define BCM2711_DMA40_DEBUG_ABORT_ON_ERR BIT(9)
+#define BCM2711_DMA40_DEBUG_HALT_ON_ERR BIT(10)
+#define BCM2711_DMA40_DEBUG_DISABLE_CLK_GATE BIT(11)
+#define BCM2711_DMA40_DEBUG_RSTATE_SHIFT 14
+#define BCM2711_DMA40_DEBUG_RSTATE_BITS 4
+#define BCM2711_DMA40_DEBUG_WSTATE_SHIFT 18
+#define BCM2711_DMA40_DEBUG_WSTATE_BITS 4
+#define BCM2711_DMA40_DEBUG_RESET BIT(23)
+#define BCM2711_DMA40_DEBUG_ID_SHIFT 24
+#define BCM2711_DMA40_DEBUG_ID_BITS 4
+#define BCM2711_DMA40_DEBUG_VERSION_SHIFT 28
+#define BCM2711_DMA40_DEBUG_VERSION_BITS 4
+
+/* Valid only for channels 0 - 3 (11 - 14) */
+#define BCM2711_DMA40_CHAN(n) (((n) + 11) << 8) /* Base address */
+#define BCM2711_DMA40_CHANIO(base, n) ((base) + BCM2711_DMA_CHAN(n))
+
+/* the max dma length for different channels */
+#define MAX_DMA40_LEN SZ_1G
+
+#define BCM2711_DMA40_BURST_LEN(x) (((x) & 15) << 8)
+#define BCM2711_DMA40_INC BIT(12)
+#define BCM2711_DMA40_SIZE_32 (0 << 13)
+#define BCM2711_DMA40_SIZE_64 (1 << 13)
+#define BCM2711_DMA40_SIZE_128 (2 << 13)
+#define BCM2711_DMA40_SIZE_256 (3 << 13)
+#define BCM2711_DMA40_IGNORE BIT(15)
+#define BCM2711_DMA40_STRIDE(x) ((x) << 16) /* For 2D mode */
+
+#define BCM2711_DMA40_MEMCPY_FLAGS \
+ (BCM2711_DMA40_QOS(0) | \
+ BCM2711_DMA40_PANIC_QOS(0) | \
+ BCM2711_DMA40_WAIT_FOR_WRITES | \
+ BCM2711_DMA40_DISDEBUG)
+
+#define BCM2711_DMA40_MEMCPY_XFER_INFO \
+ (BCM2711_DMA40_SIZE_128 | \
+ BCM2711_DMA40_INC | \
+ BCM2711_DMA40_BURST_LEN(16))
+
+struct bcm2835_dmadev *memcpy_parent;
+static void __iomem *memcpy_chan;
+static struct bcm2711_dma40_scb *memcpy_scb;
+static dma_addr_t memcpy_scb_dma;
+DEFINE_SPINLOCK(memcpy_lock);
+
+static const struct bcm2835_dma_cfg_data bcm2835_dma_cfg = {
+ .chan_40bit_mask = 0,
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
+static const struct bcm2835_dma_cfg_data bcm2711_dma_cfg = {
+ .chan_40bit_mask = BIT(11) | BIT(12) | BIT(13) | BIT(14),
+ .dma_mask = DMA_BIT_MASK(36),
+};
+
static inline size_t bcm2835_dma_max_frame_length(struct bcm2835_chan *c)
{
/* lite and normal channels have different max frame length */
@@ -201,6 +360,36 @@ static inline struct bcm2835_desc *to_bc
return container_of(t, struct bcm2835_desc, vd.tx);
}
+static inline uint32_t to_bcm2711_ti(uint32_t info)
+{
+ return ((info & BCM2835_DMA_INT_EN) ? BCM2711_DMA40_INTEN : 0) |
+ ((info & BCM2835_DMA_WAIT_RESP) ? BCM2711_DMA40_WAIT_RESP : 0) |
+ ((info & BCM2835_DMA_S_DREQ) ?
+ (BCM2711_DMA40_S_DREQ | BCM2711_DMA40_WAIT_RD_RESP) : 0) |
+ ((info & BCM2835_DMA_D_DREQ) ? BCM2711_DMA40_D_DREQ : 0) |
+ BCM2711_DMA40_PER_MAP((info >> 16) & 0x1f);
+}
+
+static inline uint32_t to_bcm2711_srci(uint32_t info)
+{
+ return ((info & BCM2835_DMA_S_INC) ? BCM2711_DMA40_INC : 0) |
+ ((info & BCM2835_DMA_S_WIDTH) ? BCM2711_DMA40_SIZE_128 : 0) |
+ BCM2711_DMA40_BURST_LEN(BCM2835_DMA_GET_BURST_LENGTH(info));
+}
+
+static inline uint32_t to_bcm2711_dsti(uint32_t info)
+{
+ return ((info & BCM2835_DMA_D_INC) ? BCM2711_DMA40_INC : 0) |
+ ((info & BCM2835_DMA_D_WIDTH) ? BCM2711_DMA40_SIZE_128 : 0) |
+ BCM2711_DMA40_BURST_LEN(BCM2835_DMA_GET_BURST_LENGTH(info));
+}
+
+static inline uint32_t to_bcm2711_cbaddr(dma_addr_t addr)
+{
+ BUG_ON(addr & 0x1f);
+ return (addr >> 5);
+}
+
static void bcm2835_dma_free_cb_chain(struct bcm2835_desc *desc)
{
size_t i;
@@ -219,45 +408,53 @@ static void bcm2835_dma_desc_free(struct
}
static void bcm2835_dma_create_cb_set_length(
- struct bcm2835_chan *chan,
+ struct bcm2835_chan *c,
struct bcm2835_dma_cb *control_block,
size_t len,
size_t period_len,
size_t *total_len,
u32 finalextrainfo)
{
- size_t max_len = bcm2835_dma_max_frame_length(chan);
+ size_t max_len = bcm2835_dma_max_frame_length(c);
+ uint32_t cb_len;
/* set the length taking lite-channel limitations into account */
- control_block->length = min_t(u32, len, max_len);
+ cb_len = min_t(u32, len, max_len);
- /* finished if we have no period_length */
- if (!period_len)
- return;
+ if (period_len) {
+ /*
+ * period_len means: that we need to generate
+ * transfers that are terminating at every
+ * multiple of period_len - this is typically
+ * used to set the interrupt flag in info
+ * which is required during cyclic transfers
+ */
- /*
- * period_len means: that we need to generate
- * transfers that are terminating at every
- * multiple of period_len - this is typically
- * used to set the interrupt flag in info
- * which is required during cyclic transfers
- */
+ /* have we filled in period_length yet? */
+ if (*total_len + cb_len < period_len) {
+ /* update number of bytes in this period so far */
+ *total_len += cb_len;
+ } else {
+ /* calculate the length that remains to reach period_len */
+ cb_len = period_len - *total_len;
- /* have we filled in period_length yet? */
- if (*total_len + control_block->length < period_len) {
- /* update number of bytes in this period so far */
- *total_len += control_block->length;
- return;
+ /* reset total_length for next period */
+ *total_len = 0;
+ }
}
- /* calculate the length that remains to reach period_length */
- control_block->length = period_len - *total_len;
-
- /* reset total_length for next period */
- *total_len = 0;
-
- /* add extrainfo bits in info */
- control_block->info |= finalextrainfo;
+ if (c->is_40bit_channel) {
+ struct bcm2711_dma40_scb *scb =
+ (struct bcm2711_dma40_scb *)control_block;
+
+ scb->len = cb_len;
+ /* add extrainfo bits to ti */
+ scb->ti |= to_bcm2711_ti(finalextrainfo);
+ } else {
+ control_block->length = cb_len;
+ /* add extrainfo bits to info */
+ control_block->info |= finalextrainfo;
+ }
}
static inline size_t bcm2835_dma_count_frames_for_sg(
@@ -280,7 +477,7 @@ static inline size_t bcm2835_dma_count_f
/**
* bcm2835_dma_create_cb_chain - create a control block and fills data in
*
- * @chan: the @dma_chan for which we run this
+ * @c: the @bcm2835_chan for which we run this
* @direction: the direction in which we transfer
* @cyclic: it is a cyclic transfer
* @info: the default info bits to apply per controlblock
@@ -298,12 +495,11 @@ static inline size_t bcm2835_dma_count_f
* @gfp: the GFP flag to use for allocation
*/
static struct bcm2835_desc *bcm2835_dma_create_cb_chain(
- struct dma_chan *chan, enum dma_transfer_direction direction,
+ struct bcm2835_chan *c, enum dma_transfer_direction direction,
bool cyclic, u32 info, u32 finalextrainfo, size_t frames,
dma_addr_t src, dma_addr_t dst, size_t buf_len,
size_t period_len, gfp_t gfp)
{
- struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
size_t len = buf_len, total_len;
size_t frame;
struct bcm2835_desc *d;
@@ -335,11 +531,23 @@ static struct bcm2835_desc *bcm2835_dma_
/* fill in the control block */
control_block = cb_entry->cb;
- control_block->info = info;
- control_block->src = src;
- control_block->dst = dst;
- control_block->stride = 0;
- control_block->next = 0;
+ if (c->is_40bit_channel) {
+ struct bcm2711_dma40_scb *scb =
+ (struct bcm2711_dma40_scb *)control_block;
+ scb->ti = to_bcm2711_ti(info);
+ scb->src = lower_32_bits(src);
+ scb->srci= upper_32_bits(src) | to_bcm2711_srci(info);
+ scb->dst = lower_32_bits(dst);
+ scb->dsti = upper_32_bits(dst) | to_bcm2711_dsti(info);
+ scb->next_cb = 0;
+ } else {
+ control_block->info = info;
+ control_block->src = src;
+ control_block->dst = dst;
+ control_block->stride = 0;
+ control_block->next = 0;
+ }
+
/* set up length in control_block if requested */
if (buf_len) {
/* calculate length honoring period_length */
@@ -349,25 +557,51 @@ static struct bcm2835_desc *bcm2835_dma_
cyclic ? finalextrainfo : 0);
/* calculate new remaining length */
- len -= control_block->length;
+ if (c->is_40bit_channel)
+ len -= ((struct bcm2711_dma40_scb *)control_block)->len;
+ else
+ len -= control_block->length;
}
/* link this the last controlblock */
- if (frame)
+ if (frame && c->is_40bit_channel)
+ ((struct bcm2711_dma40_scb *)
+ d->cb_list[frame - 1].cb)->next_cb =
+ to_bcm2711_cbaddr(cb_entry->paddr);
+ if (frame && !c->is_40bit_channel)
d->cb_list[frame - 1].cb->next = cb_entry->paddr;
/* update src and dst and length */
- if (src && (info & BCM2835_DMA_S_INC))
- src += control_block->length;
- if (dst && (info & BCM2835_DMA_D_INC))
- dst += control_block->length;
+ if (src && (info & BCM2835_DMA_S_INC)) {
+ if (c->is_40bit_channel)
+ src += ((struct bcm2711_dma40_scb *)control_block)->len;
+ else
+ src += control_block->length;
+ }
+
+ if (dst && (info & BCM2835_DMA_D_INC)) {
+ if (c->is_40bit_channel)
+ dst += ((struct bcm2711_dma40_scb *)control_block)->len;
+ else
+ dst += control_block->length;
+ }
/* Length of total transfer */
- d->size += control_block->length;
+ if (c->is_40bit_channel)
+ d->size += ((struct bcm2711_dma40_scb *)control_block)->len;
+ else
+ d->size += control_block->length;
}
/* the last frame requires extra flags */
- d->cb_list[d->frames - 1].cb->info |= finalextrainfo;
+ if (c->is_40bit_channel) {
+ struct bcm2711_dma40_scb *scb =
+ (struct bcm2711_dma40_scb *)d->cb_list[d->frames-1].cb;
+
+ scb->ti |= to_bcm2711_ti(finalextrainfo);
+ } else {
+ d->cb_list[d->frames - 1].cb->info |= finalextrainfo;
+ }
/* detect a size missmatch */
if (buf_len && (d->size != buf_len))
@@ -381,13 +615,12 @@ error_cb:
}
static void bcm2835_dma_fill_cb_chain_with_sg(
- struct dma_chan *chan,
+ struct bcm2835_chan *c,
enum dma_transfer_direction direction,
struct bcm2835_cb_entry *cb,
struct scatterlist *sgl,
unsigned int sg_len)
{
- struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
size_t len, max_len;
unsigned int i;
dma_addr_t addr;
@@ -395,14 +628,35 @@ static void bcm2835_dma_fill_cb_chain_wi
max_len = bcm2835_dma_max_frame_length(c);
for_each_sg(sgl, sgent, sg_len, i) {
- for (addr = sg_dma_address(sgent), len = sg_dma_len(sgent);
- len > 0;
- addr += cb->cb->length, len -= cb->cb->length, cb++) {
- if (direction == DMA_DEV_TO_MEM)
- cb->cb->dst = addr;
- else
- cb->cb->src = addr;
- cb->cb->length = min(len, max_len);
+ if (c->is_40bit_channel) {
+ struct bcm2711_dma40_scb *scb;
+
+ for (addr = sg_dma_address(sgent),
+ len = sg_dma_len(sgent);
+ len > 0;
+ addr += scb->len, len -= scb->len, cb++) {
+ scb = (struct bcm2711_dma40_scb *)cb->cb;
+ if (direction == DMA_DEV_TO_MEM) {
+ scb->dst = lower_32_bits(addr);
+ scb->dsti = upper_32_bits(addr) | BCM2711_DMA40_INC;
+ } else {
+ scb->src = lower_32_bits(addr);
+ scb->srci = upper_32_bits(addr) | BCM2711_DMA40_INC;
+ }
+ scb->len = min(len, max_len);
+ }
+ } else {
+ for (addr = sg_dma_address(sgent),
+ len = sg_dma_len(sgent);
+ len > 0;
+ addr += cb->cb->length, len -= cb->cb->length,
+ cb++) {
+ if (direction == DMA_DEV_TO_MEM)
+ cb->cb->dst = addr;
+ else
+ cb->cb->src = addr;
+ cb->cb->length = min(len, max_len);
+ }
}
}
}
@@ -410,29 +664,74 @@ static void bcm2835_dma_fill_cb_chain_wi
static void bcm2835_dma_abort(struct bcm2835_chan *c)
{
void __iomem *chan_base = c->chan_base;
- long int timeout = 10000;
+ long timeout = 100;
- /*
- * A zero control block address means the channel is idle.
- * (The ACTIVE flag in the CS register is not a reliable indicator.)
- */
- if (!readl(chan_base + BCM2835_DMA_ADDR))
- return;
+ if (c->is_40bit_channel) {
+ /*
+ * A zero control block address means the channel is idle.
+ * (The ACTIVE flag in the CS register is not a reliable indicator.)
+ */
+ if (!readl(chan_base + BCM2711_DMA40_CB))
+ return;
+
+ /* Pause the current DMA */
+ writel(readl(chan_base + BCM2711_DMA40_CS) & ~BCM2711_DMA40_ACTIVE,
+ chan_base + BCM2711_DMA40_CS);
+
+ /* wait for outstanding transactions to complete */
+ while ((readl(chan_base + BCM2711_DMA40_CS) & BCM2711_DMA40_TRANSACTIONS) &&
+ --timeout)
+ cpu_relax();
+
+ /* Peripheral might be stuck and fail to complete */
+ if (!timeout)
+ dev_err(c->vc.chan.device->dev,
+ "failed to complete pause on dma %d (CS:%08x)\n", c->ch,
+ readl(chan_base + BCM2711_DMA40_CS));
+
+ /* Set CS back to default state */
+ writel(BCM2711_DMA40_PROT, chan_base + BCM2711_DMA40_CS);
+
+ /* Reset the DMA */
+ writel(readl(chan_base + BCM2711_DMA40_DEBUG) | BCM2711_DMA40_DEBUG_RESET,
+ chan_base + BCM2711_DMA40_DEBUG);
+ } else {
+ /*
+ * A zero control block address means the channel is idle.
+ * (The ACTIVE flag in the CS register is not a reliable indicator.)
+ */
+ if (!readl(chan_base + BCM2835_DMA_ADDR))
+ return;
- /* Write 0 to the active bit - Pause the DMA */
- writel(0, chan_base + BCM2835_DMA_CS);
+ /* We need to clear the next DMA block pending */
+ writel(0, chan_base + BCM2835_DMA_NEXTCB);
- /* Wait for any current AXI transfer to complete */
- while ((readl(chan_base + BCM2835_DMA_CS) &
- BCM2835_DMA_WAITING_FOR_WRITES) && --timeout)
- cpu_relax();
+ /* Abort the DMA, which needs to be enabled to complete */
+ writel(readl(chan_base + BCM2835_DMA_CS) | BCM2835_DMA_ABORT | BCM2835_DMA_ACTIVE,
+ chan_base + BCM2835_DMA_CS);
+
+ /* wait for DMA to be aborted */
+ while ((readl(chan_base + BCM2835_DMA_CS) & BCM2835_DMA_ABORT) && --timeout)
+ cpu_relax();
+
+ /* Write 0 to the active bit - Pause the DMA */
+ writel(readl(chan_base + BCM2835_DMA_CS) & ~BCM2835_DMA_ACTIVE,
+ chan_base + BCM2835_DMA_CS);
- /* Peripheral might be stuck and fail to signal AXI write responses */
- if (!timeout)
- dev_err(c->vc.chan.device->dev,
- "failed to complete outstanding writes\n");
+ /*
+ * Peripheral might be stuck and fail to complete
+ * This is expected when dreqs are enabled but not asserted
+ * so only report error in non dreq case
+ */
+ if (!timeout && !(readl(chan_base + BCM2835_DMA_TI) &
+ (BCM2835_DMA_S_DREQ | BCM2835_DMA_D_DREQ)))
+ dev_err(c->vc.chan.device->dev,
+ "failed to complete pause on dma %d (CS:%08x)\n", c->ch,
+ readl(chan_base + BCM2835_DMA_CS));
- writel(BCM2835_DMA_RESET, chan_base + BCM2835_DMA_CS);
+ /* Set CS back to default state and reset the DMA */
+ writel(BCM2835_DMA_RESET, chan_base + BCM2835_DMA_CS);
+ }
}
static void bcm2835_dma_start_desc(struct bcm2835_chan *c)
@@ -449,8 +748,16 @@ static void bcm2835_dma_start_desc(struc
c->desc = d = to_bcm2835_dma_desc(&vd->tx);
- writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR);
- writel(BCM2835_DMA_ACTIVE, c->chan_base + BCM2835_DMA_CS);
+ if (c->is_40bit_channel) {
+ writel(to_bcm2711_cbaddr(d->cb_list[0].paddr),
+ c->chan_base + BCM2711_DMA40_CB);
+ writel(BCM2711_DMA40_ACTIVE | BCM2711_DMA40_PROT | BCM2711_DMA40_CS_FLAGS(c->dreq),
+ c->chan_base + BCM2711_DMA40_CS);
+ } else {
+ writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR);
+ writel(BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq),
+ c->chan_base + BCM2835_DMA_CS);
+ }
}
static irqreturn_t bcm2835_dma_callback(int irq, void *data)
@@ -477,8 +784,13 @@ static irqreturn_t bcm2835_dma_callback(
* if this IRQ handler is threaded.) If the channel is finished, it
* will remain idle despite the ACTIVE flag being set.
*/
- writel(BCM2835_DMA_INT | BCM2835_DMA_ACTIVE,
- c->chan_base + BCM2835_DMA_CS);
+ if (c->is_40bit_channel)
+ writel(BCM2835_DMA_INT | BCM2711_DMA40_ACTIVE | BCM2711_DMA40_PROT |
+ BCM2711_DMA40_CS_FLAGS(c->dreq),
+ c->chan_base + BCM2711_DMA40_CS);
+ else
+ writel(BCM2835_DMA_INT | BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq),
+ c->chan_base + BCM2835_DMA_CS);
d = c->desc;
@@ -540,20 +852,39 @@ static size_t bcm2835_dma_desc_size_pos(
unsigned int i;
size_t size;
- for (size = i = 0; i < d->frames; i++) {
- struct bcm2835_dma_cb *control_block = d->cb_list[i].cb;
- size_t this_size = control_block->length;
- dma_addr_t dma;
+ if (d->c->is_40bit_channel) {
+ for (size = i = 0; i < d->frames; i++) {
+ struct bcm2711_dma40_scb *control_block =
+ (struct bcm2711_dma40_scb *)d->cb_list[i].cb;
+ size_t this_size = control_block->len;
+ dma_addr_t dma;
- if (d->dir == DMA_DEV_TO_MEM)
- dma = control_block->dst;
- else
- dma = control_block->src;
+ if (d->dir == DMA_DEV_TO_MEM)
+ dma = control_block->dst;
+ else
+ dma = control_block->src;
+
+ if (size)
+ size += this_size;
+ else if (addr >= dma && addr < dma + this_size)
+ size += dma + this_size - addr;
+ }
+ } else {
+ for (size = i = 0; i < d->frames; i++) {
+ struct bcm2835_dma_cb *control_block = d->cb_list[i].cb;
+ size_t this_size = control_block->length;
+ dma_addr_t dma;
+
+ if (d->dir == DMA_DEV_TO_MEM)
+ dma = control_block->dst;
+ else
+ dma = control_block->src;
- if (size)
- size += this_size;
- else if (addr >= dma && addr < dma + this_size)
- size += dma + this_size - addr;
+ if (size)
+ size += this_size;
+ else if (addr >= dma && addr < dma + this_size)
+ size += dma + this_size - addr;
+ }
}
return size;
@@ -580,12 +911,25 @@ static enum dma_status bcm2835_dma_tx_st
struct bcm2835_desc *d = c->desc;
dma_addr_t pos;
- if (d->dir == DMA_MEM_TO_DEV)
+ if (d->dir == DMA_MEM_TO_DEV && c->is_40bit_channel) {
+ u64 lo_bits, hi_bits;
+
+ lo_bits = readl(c->chan_base + BCM2711_DMA40_SRC);
+ hi_bits = readl(c->chan_base + BCM2711_DMA40_SRCI) & 0xff;
+ pos = (hi_bits << 32) | lo_bits;
+ } else if (d->dir == DMA_MEM_TO_DEV && !c->is_40bit_channel) {
pos = readl(c->chan_base + BCM2835_DMA_SOURCE_AD);
- else if (d->dir == DMA_DEV_TO_MEM)
+ } else if (d->dir == DMA_DEV_TO_MEM && c->is_40bit_channel) {
+ u64 lo_bits, hi_bits;
+
+ lo_bits = readl(c->chan_base + BCM2711_DMA40_DEST);
+ hi_bits = readl(c->chan_base + BCM2711_DMA40_DESTI) & 0xff;
+ pos = (hi_bits << 32) | lo_bits;
+ } else if (d->dir == DMA_DEV_TO_MEM && !c->is_40bit_channel) {
pos = readl(c->chan_base + BCM2835_DMA_DEST_AD);
- else
+ } else {
pos = 0;
+ }
txstate->residue = bcm2835_dma_desc_size_pos(d, pos);
} else {
@@ -615,8 +959,10 @@ static struct dma_async_tx_descriptor *b
{
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
struct bcm2835_desc *d;
- u32 info = BCM2835_DMA_D_INC | BCM2835_DMA_S_INC;
- u32 extra = BCM2835_DMA_INT_EN | BCM2835_DMA_WAIT_RESP;
+ u32 info = BCM2835_DMA_D_INC | BCM2835_DMA_S_INC |
+ WAIT_RESP(c->dreq) | WIDE_SOURCE(c->dreq) |
+ WIDE_DEST(c->dreq) | BURST_LENGTH(c->dreq);
+ u32 extra = BCM2835_DMA_INT_EN;
size_t max_len = bcm2835_dma_max_frame_length(c);
size_t frames;
@@ -628,7 +974,7 @@ static struct dma_async_tx_descriptor *b
frames = bcm2835_dma_frames_for_length(len, max_len);
/* allocate the CB chain - this also fills in the pointers */
- d = bcm2835_dma_create_cb_chain(chan, DMA_MEM_TO_MEM, false,
+ d = bcm2835_dma_create_cb_chain(c, DMA_MEM_TO_MEM, false,
info, extra, frames,
src, dst, len, 0, GFP_KERNEL);
if (!d)
@@ -646,7 +992,8 @@ static struct dma_async_tx_descriptor *b
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
struct bcm2835_desc *d;
dma_addr_t src = 0, dst = 0;
- u32 info = BCM2835_DMA_WAIT_RESP;
+ u32 info = WAIT_RESP(c->dreq) | WIDE_SOURCE(c->dreq) |
+ WIDE_DEST(c->dreq) | BURST_LENGTH(c->dreq);
u32 extra = BCM2835_DMA_INT_EN;
size_t frames;
@@ -662,12 +1009,12 @@ static struct dma_async_tx_descriptor *b
if (direction == DMA_DEV_TO_MEM) {
if (c->cfg.src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES)
return NULL;
- src = c->cfg.src_addr;
+ src = phys_to_dma(chan->device->dev, c->cfg.src_addr);
info |= BCM2835_DMA_S_DREQ | BCM2835_DMA_D_INC;
} else {
if (c->cfg.dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES)
return NULL;
- dst = c->cfg.dst_addr;
+ dst = phys_to_dma(chan->device->dev, c->cfg.dst_addr);
info |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC;
}
@@ -675,7 +1022,7 @@ static struct dma_async_tx_descriptor *b
frames = bcm2835_dma_count_frames_for_sg(c, sgl, sg_len);
/* allocate the CB chain */
- d = bcm2835_dma_create_cb_chain(chan, direction, false,
+ d = bcm2835_dma_create_cb_chain(c, direction, false,
info, extra,
frames, src, dst, 0, 0,
GFP_NOWAIT);
@@ -683,7 +1030,7 @@ static struct dma_async_tx_descriptor *b
return NULL;
/* fill in frames with scatterlist pointers */
- bcm2835_dma_fill_cb_chain_with_sg(chan, direction, d->cb_list,
+ bcm2835_dma_fill_cb_chain_with_sg(c, direction, d->cb_list,
sgl, sg_len);
return vchan_tx_prep(&c->vc, &d->vd, flags);
@@ -698,7 +1045,8 @@ static struct dma_async_tx_descriptor *b
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
struct bcm2835_desc *d;
dma_addr_t src, dst;
- u32 info = BCM2835_DMA_WAIT_RESP;
+ u32 info = WAIT_RESP(c->dreq) | WIDE_SOURCE(c->dreq) |
+ WIDE_DEST(c->dreq) | BURST_LENGTH(c->dreq);
u32 extra = 0;
size_t max_len = bcm2835_dma_max_frame_length(c);
size_t frames;
@@ -736,13 +1084,13 @@ static struct dma_async_tx_descriptor *b
if (direction == DMA_DEV_TO_MEM) {
if (c->cfg.src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES)
return NULL;
- src = c->cfg.src_addr;
+ src = phys_to_dma(chan->device->dev, c->cfg.src_addr);
dst = buf_addr;
info |= BCM2835_DMA_S_DREQ | BCM2835_DMA_D_INC;
} else {
if (c->cfg.dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES)
return NULL;
- dst = c->cfg.dst_addr;
+ dst = phys_to_dma(chan->device->dev, c->cfg.dst_addr);
src = buf_addr;
info |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC;
@@ -762,7 +1110,7 @@ static struct dma_async_tx_descriptor *b
* note that we need to use GFP_NOWAIT, as the ALSA i2s dmaengine
* implementation calls prep_dma_cyclic with interrupts disabled.
*/
- d = bcm2835_dma_create_cb_chain(chan, direction, true,
+ d = bcm2835_dma_create_cb_chain(c, direction, true,
info, extra,
frames, src, dst, buf_len,
period_len, GFP_NOWAIT);
@@ -770,7 +1118,12 @@ static struct dma_async_tx_descriptor *b
return NULL;
/* wrap around into a loop */
- d->cb_list[d->frames - 1].cb->next = d->cb_list[0].paddr;
+ if (c->is_40bit_channel)
+ ((struct bcm2711_dma40_scb *)
+ d->cb_list[frames - 1].cb)->next_cb =
+ to_bcm2711_cbaddr(d->cb_list[0].paddr);
+ else
+ d->cb_list[d->frames - 1].cb->next = d->cb_list[0].paddr;
return vchan_tx_prep(&c->vc, &d->vd, flags);
}
@@ -831,9 +1184,11 @@ static int bcm2835_dma_chan_init(struct
c->irq_number = irq;
c->irq_flags = irq_flags;
- /* check in DEBUG register if this is a LITE channel */
- if (readl(c->chan_base + BCM2835_DMA_DEBUG) &
- BCM2835_DMA_DEBUG_LITE)
+ /* check for 40bit and lite channels */
+ if (d->cfg_data->chan_40bit_mask & BIT(chan_id))
+ c->is_40bit_channel = true;
+ else if (readl(c->chan_base + BCM2835_DMA_DEBUG) &
+ BCM2835_DMA_DEBUG_LITE)
c->is_lite_channel = true;
return 0;
@@ -853,8 +1208,58 @@ static void bcm2835_dma_free(struct bcm2
DMA_TO_DEVICE, DMA_ATTR_SKIP_CPU_SYNC);
}
+int bcm2711_dma40_memcpy_init(void)
+{
+ if (!memcpy_parent)
+ return -EPROBE_DEFER;
+
+ if (!memcpy_chan)
+ return -EINVAL;
+
+ if (!memcpy_scb)
+ return -ENOMEM;
+
+ return 0;
+}
+EXPORT_SYMBOL(bcm2711_dma40_memcpy_init);
+
+void bcm2711_dma40_memcpy(dma_addr_t dst, dma_addr_t src, size_t size)
+{
+ struct bcm2711_dma40_scb *scb = memcpy_scb;
+ unsigned long flags;
+
+ if (!scb) {
+ pr_err("bcm2711_dma40_memcpy not initialised!\n");
+ return;
+ }
+
+ spin_lock_irqsave(&memcpy_lock, flags);
+
+ scb->ti = 0;
+ scb->src = lower_32_bits(src);
+ scb->srci = upper_32_bits(src) | BCM2711_DMA40_MEMCPY_XFER_INFO;
+ scb->dst = lower_32_bits(dst);
+ scb->dsti = upper_32_bits(dst) | BCM2711_DMA40_MEMCPY_XFER_INFO;
+ scb->len = size;
+ scb->next_cb = 0;
+
+ writel(to_bcm2711_cbaddr(memcpy_scb_dma), memcpy_chan + BCM2711_DMA40_CB);
+ writel(BCM2711_DMA40_MEMCPY_FLAGS | BCM2711_DMA40_ACTIVE | BCM2711_DMA40_PROT,
+ memcpy_chan + BCM2711_DMA40_CS);
+
+ /* Poll for completion */
+ while (!(readl(memcpy_chan + BCM2711_DMA40_CS) & BCM2711_DMA40_END))
+ cpu_relax();
+
+ writel(BCM2711_DMA40_END | BCM2711_DMA40_PROT, memcpy_chan + BCM2711_DMA40_CS);
+
+ spin_unlock_irqrestore(&memcpy_lock, flags);
+}
+EXPORT_SYMBOL(bcm2711_dma40_memcpy);
+
static const struct of_device_id bcm2835_dma_of_match[] = {
- { .compatible = "brcm,bcm2835-dma", },
+ { .compatible = "brcm,bcm2835-dma", .data = &bcm2835_dma_cfg },
+ { .compatible = "brcm,bcm2711-dma", .data = &bcm2711_dma_cfg },
{},
};
MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match);
@@ -877,7 +1282,10 @@ static struct dma_chan *bcm2835_dma_xlat
static int bcm2835_dma_probe(struct platform_device *pdev)
{
+ const struct bcm2835_dma_cfg_data *cfg_data;
+ const struct of_device_id *of_id;
struct bcm2835_dmadev *od;
+ struct resource *res;
void __iomem *base;
int rc;
int i, j;
@@ -885,11 +1293,20 @@ static int bcm2835_dma_probe(struct plat
int irq_flags;
uint32_t chans_available;
char chan_name[BCM2835_DMA_CHAN_NAME_SIZE];
+ int chan_count, chan_start, chan_end;
+
+ of_id = of_match_node(bcm2835_dma_of_match, pdev->dev.of_node);
+ if (!of_id) {
+ dev_err(&pdev->dev, "Failed to match compatible string\n");
+ return -EINVAL;
+ }
+
+ cfg_data = of_id->data;
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
- rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ rc = dma_set_mask_and_coherent(&pdev->dev, cfg_data->dma_mask);
if (rc) {
dev_err(&pdev->dev, "Unable to set DMA mask\n");
return rc;
@@ -901,10 +1318,17 @@ static int bcm2835_dma_probe(struct plat
dma_set_max_seg_size(&pdev->dev, 0x3FFFFFFF);
- base = devm_platform_ioremap_resource(pdev, 0);
+ base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(base))
return PTR_ERR(base);
+ /* The set of channels can be split across multiple instances. */
+ chan_start = ((u32)(uintptr_t)base / BCM2835_DMA_CHAN_SIZE) & 0xf;
+ base -= BCM2835_DMA_CHAN(chan_start);
+ chan_count = resource_size(res) / BCM2835_DMA_CHAN_SIZE;
+ chan_end = min(chan_start + chan_count,
+ BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED + 1);
+
od->base = base;
dma_cap_set(DMA_SLAVE, od->ddev.cap_mask);
@@ -940,6 +1364,14 @@ static int bcm2835_dma_probe(struct plat
return -ENOMEM;
}
+ of_id = of_match_node(bcm2835_dma_of_match, pdev->dev.of_node);
+ if (!of_id) {
+ dev_err(&pdev->dev, "Failed to match compatible string\n");
+ return -EINVAL;
+ }
+
+ od->cfg_data = cfg_data;
+
/* Request DMA channel mask from device tree */
if (of_property_read_u32(pdev->dev.of_node,
"brcm,dma-channel-mask",
@@ -949,8 +1381,36 @@ static int bcm2835_dma_probe(struct plat
goto err_no_dma;
}
+#ifdef CONFIG_DMA_BCM2708
+ /* One channel is reserved for the legacy API */
+ if (chans_available & BCM2835_DMA_BULK_MASK) {
+ rc = bcm_dmaman_probe(pdev, base,
+ chans_available & BCM2835_DMA_BULK_MASK);
+ if (rc)
+ dev_err(&pdev->dev,
+ "Failed to initialize the legacy API\n");
+
+ chans_available &= ~BCM2835_DMA_BULK_MASK;
+ }
+#endif
+
+ /* And possibly one for the 40-bit DMA memcpy API */
+ if (chans_available & od->cfg_data->chan_40bit_mask &
+ BIT(BCM2711_DMA_MEMCPY_CHAN)) {
+ memcpy_parent = od;
+ memcpy_chan = BCM2835_DMA_CHANIO(base, BCM2711_DMA_MEMCPY_CHAN);
+ memcpy_scb = dma_alloc_coherent(memcpy_parent->ddev.dev,
+ sizeof(*memcpy_scb),
+ &memcpy_scb_dma, GFP_KERNEL);
+ if (!memcpy_scb)
+ dev_warn(&pdev->dev,
+ "Failed to allocated memcpy scb\n");
+
+ chans_available &= ~BIT(BCM2711_DMA_MEMCPY_CHAN);
+ }
+
/* get irqs for each channel that we support */
- for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
+ for (i = chan_start; i < chan_end; i++) {
/* skip masked out channels */
if (!(chans_available & (1 << i))) {
irq[i] = -1;
@@ -973,13 +1433,17 @@ static int bcm2835_dma_probe(struct plat
irq[i] = platform_get_irq(pdev, i < 11 ? i : 11);
}
+ chan_count = 0;
+
/* get irqs for each channel */
- for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
+ for (i = chan_start; i < chan_end; i++) {
/* skip channels without irq */
if (irq[i] < 0)
continue;
/* check if there are other channels that also use this irq */
+ /* FIXME: This will fail if interrupts are shared across
+ instances */
irq_flags = 0;
for (j = 0; j <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; j++)
if ((i != j) && (irq[j] == irq[i])) {
@@ -991,9 +1455,10 @@ static int bcm2835_dma_probe(struct plat
rc = bcm2835_dma_chan_init(od, i, irq[i], irq_flags);
if (rc)
goto err_no_dma;
+ chan_count++;
}
- dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", i);
+ dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", chan_count);
/* Device-tree DMA controller registration */
rc = of_dma_controller_register(pdev->dev.of_node,
@@ -1023,7 +1488,15 @@ static int bcm2835_dma_remove(struct pla
{
struct bcm2835_dmadev *od = platform_get_drvdata(pdev);
+ bcm_dmaman_remove(pdev);
dma_async_device_unregister(&od->ddev);
+ if (memcpy_parent == od) {
+ dma_free_coherent(&pdev->dev, sizeof(*memcpy_scb), memcpy_scb,
+ memcpy_scb_dma);
+ memcpy_parent = NULL;
+ memcpy_scb = NULL;
+ memcpy_chan = NULL;
+ }
bcm2835_dma_free(od);
return 0;
@@ -1038,7 +1511,22 @@ static struct platform_driver bcm2835_dm
},
};
-module_platform_driver(bcm2835_dma_driver);
+static int bcm2835_dma_init(void)
+{
+ return platform_driver_register(&bcm2835_dma_driver);
+}
+
+static void bcm2835_dma_exit(void)
+{
+ platform_driver_unregister(&bcm2835_dma_driver);
+}
+
+/*
+ * Load after serial driver (arch_initcall) so we see the messages if it fails,
+ * but before drivers (module_init) that need a DMA channel.
+ */
+subsys_initcall(bcm2835_dma_init);
+module_exit(bcm2835_dma_exit);
MODULE_ALIAS("platform:bcm2835-dma");
MODULE_DESCRIPTION("BCM2835 DMA engine driver");
Reference in New Issue View Git Blame Copy Permalink