mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
4f74957584
This adds the patches to get fairly complete Gemini support
using kernel v4.14. It is mainly a backport of patches from
kernel v4.16 with omissions of things like graphics that require
substantial changes and will be better handled once we move
to the v4.16 kernel proper.
On top of this are some WIP patches for USB support.
Tested on Raidsonic NAS4220B and D-link DNS-313.
ChangeLog v4->v5:
- Fix ethernet single gmac usecase
- Fix USB reset (patch from Hans)
- Fix Raidsonic ethernet skew delay
- Fix kernel config (bridge, squashfs, jffs2, usb)
- Disable second usb port on Raidsonic board until fotg210_hcd is fixed
ChangeLog v3->v4:
- Make sure to use tabs rather than spaces in base-files.
- Use the dns313 image tool from the firmware-utils.
- Break out the addition of the v4.14 patches and the removal
of the v4.4 patches to separate (big) patches.
ChangeLog v2->v3:
- Update the kernel config as indicated by Hauke Martens:
- Regenerate again after rebasing using kernel_oldconfig
dropping a few optimization settings that are now generic
- Drop CFG80211 stuff (module)
- Drop CIFS stuff (module)
- Drop MAC80211 (module)
- Drop wireless drivers (module)
- Enabled OverlayFS
- Added proper DNS-313 boot image generation with the special
file header tool.
- Disable CMA in the kernel
- Enable LZMA compression of the kernel
- Consequently name the nas4220b images nas4220b
- Update preinit MAC detection script to handle also DNS-313
- Add board.d/03_hdparm to set the disk to spin down after
1 minute by default, if we have the hdparm tool installed
ChangeLog v1->v2:
- Processed config through kernel_oldconfig
- Processed patches through make target/linux/{clean,refresh} V=99
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Roman Yeryomin <roman@advem.lv>
89 lines
2.9 KiB
Diff
89 lines
2.9 KiB
Diff
From d73f6cc09bcbe258a72c06899215d1a3e8a7686d Mon Sep 17 00:00:00 2001
|
|
From: Linus Walleij <linus.walleij@linaro.org>
|
|
Date: Mon, 16 Oct 2017 22:54:23 +0200
|
|
Subject: [PATCH 17/31] watchdog: gemini/ftwdt010: rename DT bindings
|
|
|
|
The device tree bindings are in two copies and also should be
|
|
consolidated into a single Faraday Technology FTWDT010
|
|
binding since we uncovered that this IP part is a standard
|
|
IP from Faraday.
|
|
|
|
Cc: devicetree@vger.kernel.org
|
|
Acked-by: Rob Herring <robh@kernel.org>
|
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
|
|
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
---
|
|
.../bindings/watchdog/cortina,gemini-watchdog.txt | 17 -----------------
|
|
...{cortina,gemin-watchdog.txt => faraday,ftwdt010.txt} | 11 ++++++++---
|
|
2 files changed, 8 insertions(+), 20 deletions(-)
|
|
delete mode 100644 Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
|
|
rename Documentation/devicetree/bindings/watchdog/{cortina,gemin-watchdog.txt => faraday,ftwdt010.txt} (55%)
|
|
|
|
--- a/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
|
|
+++ /dev/null
|
|
@@ -1,17 +0,0 @@
|
|
-Cortina Systems Gemini SoC Watchdog
|
|
-
|
|
-Required properties:
|
|
-- compatible : must be "cortina,gemini-watchdog"
|
|
-- reg : shall contain base register location and length
|
|
-- interrupts : shall contain the interrupt for the watchdog
|
|
-
|
|
-Optional properties:
|
|
-- timeout-sec : the default watchdog timeout in seconds.
|
|
-
|
|
-Example:
|
|
-
|
|
-watchdog@41000000 {
|
|
- compatible = "cortina,gemini-watchdog";
|
|
- reg = <0x41000000 0x1000>;
|
|
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
|
|
-};
|
|
--- a/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt
|
|
+++ /dev/null
|
|
@@ -1,17 +0,0 @@
|
|
-Cortina Systems Gemini SoC Watchdog
|
|
-
|
|
-Required properties:
|
|
-- compatible : must be "cortina,gemini-watchdog"
|
|
-- reg : shall contain base register location and length
|
|
-- interrupts : shall contain the interrupt for the watchdog
|
|
-
|
|
-Optional properties:
|
|
-- timeout-sec : the default watchdog timeout in seconds.
|
|
-
|
|
-Example:
|
|
-
|
|
-watchdog@41000000 {
|
|
- compatible = "cortina,gemini-watchdog";
|
|
- reg = <0x41000000 0x1000>;
|
|
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
|
|
-};
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.txt
|
|
@@ -0,0 +1,22 @@
|
|
+Faraday Technology FTWDT010 watchdog
|
|
+
|
|
+This is an IP part from Faraday Technology found in the Gemini
|
|
+SoCs and others.
|
|
+
|
|
+Required properties:
|
|
+- compatible : must be one of
|
|
+ "faraday,ftwdt010"
|
|
+ "cortina,gemini-watchdog", "faraday,ftwdt010"
|
|
+- reg : shall contain base register location and length
|
|
+- interrupts : shall contain the interrupt for the watchdog
|
|
+
|
|
+Optional properties:
|
|
+- timeout-sec : the default watchdog timeout in seconds.
|
|
+
|
|
+Example:
|
|
+
|
|
+watchdog@41000000 {
|
|
+ compatible = "faraday,ftwdt010";
|
|
+ reg = <0x41000000 0x1000>;
|
|
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
|
|
+};
|