Giuseppe Lippolis 6525bffc0a ramips: add support for DLINK DWR-921-C1
The DWR-921-C1 Wireless Routers with LTE embedded modem is based on the
MT7620N SoC.

Specification:

  * MediaTek MT7620N (580 Mhz)
  * 64 MB of RAM
  * 16 MB of FLASH
  * 802.11bgn radio
  * 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
  * 2x external, detachable (LTE) antennas
  * UART header on PCB (57600 8n1)
  * 6x LED (GPIO-controlled)
  * 1x bi-color Signal Strength LED (GPIO-controlled)
  * 2x button
  * JBOOT bootloader

The status led has been assigned to the dwr-921-c1:green:sigstrength (lte
signal strength) led. At the end of the boot it is switched off and is
available for lte operation. Work correctly also during sysupgrade
operation.

Installation:
Apply factory image via d-link http web-gui.

How to revert to OEM firmware:
1.) Push the reset button and turn on the power. Wait until LED start
    blinking (~10sec.)
2.) Upload original factory image via JBOOT http (IP: 192.168.123.254)
3.) If http doesn't work, it can be done with curl command:
    curl -F FN=@XXXXX.bin http://192.168.123.254/upg
    where XXXXX.bin is name of firmware file.

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2018-04-04 08:42:35 +02:00
..
2018-02-18 02:59:57 +01:00
2017-10-28 13:59:03 +02:00
2018-02-18 02:59:48 +01:00
2018-03-29 15:31:29 +02:00
2018-03-23 23:49:55 +01:00
2018-01-09 10:26:16 +01:00
2018-02-18 02:59:57 +01:00
2018-02-20 13:25:00 +01:00
2018-02-08 19:04:38 +01:00
2017-10-18 21:46:05 +02:00
2017-10-24 18:39:17 -07:00
2018-03-03 12:58:56 +01:00
2018-03-23 23:53:20 +01:00
2018-03-08 11:44:26 -08:00
2018-02-18 19:51:58 +01:00