Daniel Golle 64dae1052b ramips: mt76x8: add support for Yuncore CPE200 ... Yuncore CPE200 is an outdoor unit with IEEE 802.11ac radio. Hardware: - SoC: MediaTek MT7628DAN (MIPS 580MHz) - Flash: 8 MiB Spansion S25FL064K - RAM: 64 MiB (built-into SoC) - WLAN: 5 GHz (MT7613AE) - Ethernet: 1x 10/100 Mbps WAN, 1x 10/100 LAN (MT7628) - Buttons: 1 Reset button, 2 buttons for display UI (unsupported) - LEDs: 4x Green (Power, LAN, WAN, WiFi) - Display: 4 digit 7-segment display driven by an additional microcontroller (unsupported) - Serial console: unpopulated header, 57600 8n1 (RX only) - Power: 12 VDC, 1 A Installation: The installation can be done via the recovery HTTP server which is built into the bootloader. Hold down the reset button while connecting the device to power and keep holding a bit more than 3 seconds. Connect to http://192.168.0.100/ and upload sysupgrade.bin file. Signed-off-by: Daniel Golle <daniel@makrotopia.org>		2024-09-02 13:27:47 +02:00
..
imagebuilder	imagebuilder: remove initramfs image files	2024-07-16 19:05:18 +02:00
linux	ramips: mt76x8: add support for Yuncore CPE200	2024-09-02 13:27:47 +02:00
llvm-bpf	build: use zstd for IB, toolchain, SDK and LLVM compression	2024-04-13 08:05:04 +02:00
sdk	build: use zstd for IB, toolchain, SDK and LLVM compression	2024-04-13 08:05:04 +02:00
toolchain	build: use zstd for IB, toolchain, SDK and LLVM compression	2024-04-13 08:05:04 +02:00
Config.in	loongarch64: new target	2024-05-04 14:14:16 +08:00
Makefile	build: add $(STAGING_DIR) and $(BIN_DIR) preparation to target and package subdir compile dependencies	2024-03-03 23:13:59 +01:00