openwrt/target/linux/ath79/dts/ar9331_hak5_wifi-pineapple-nano.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "ar9331.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	model = "Hak5 WiFi Pineapple NANO";
	compatible = "hak5,wifi-pineapple-nano", "qca,ar9331";

	aliases {
		label-mac-device = &wmac;
		led-boot = &led_system;
		led-failsafe = &led_system;
		led-upgrade = &led_system;
	};

	gpio-export {
		compatible = "gpio-export";
		#size-cells = <0>;

		microsd-detect {
			gpio-export,name = "microsd-detect";
			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
		};

		usb-alarm {
			gpio-export,name = "usb-alarm";
			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_system: system {
			label = "blue:system";
			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0tpt";
		};
	};

	reg_power_usb: regulator {
		compatible = "regulator-fixed";
		regulator-name = "power_usb";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
	};
};

&eth0 {
	status = "okay";

	nvmem-cells = <&macaddr_art_6>;
	nvmem-cell-names = "mac-address";
};

&eth1 {
	status = "okay";

	compatible = "syscon", "simple-mfd";
};

&spi {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <50000000>;
		m25p,fast-read;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x000000 0x020000>;
				read-only;
			};

			partition@20000 {
				label = "firmware";
				reg = <0x020000 0xfd0000>;
				compatible = "tplink,firmware";
			};

			partition@ff0000 {
				label = "art";
				reg = <0xff0000 0x010000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					macaddr_art_6: macaddr@6 {
						reg = <0x6 0x6>;
					};

					cal_art_1000: calibration@1000 {
						reg = <0x1000 0x440>;
					};
				};
			};
		};
	};
};

&usb {
	status = "okay";

	vbus-supply = <&reg_power_usb>;
};

&usb_phy {
	status = "okay";
};

&wmac {
	status = "okay";

	nvmem-cells = <&cal_art_1000>;
	nvmem-cell-names = "calibration";
};