openwrt/target/linux/stm32/patches-6.6/700-net-stmmac-dwmac-stm32-add-support-of-phy-supply-pro.patch
Thomas Richard 58f4667a37
stm32: add new stm32 target
New stm32 target introduces support for stm32mp1 based devices.
For now it includes an initial support of the STM32MP135F-DK device.
The specifications bellow only list supported features.

Specifications
--------------

SOC: STM32MP135FAF7
RAM: 512 MiB
Storage: SD Card
Ethernet: 2x 100 Mbps
Wireless: 2.4GHz Cypress CYW43455 (802.11b/g/n)
LEDs: Heartbeat (Blue)
Buttons: 1x Reset, 1x User (USER2)
USB: 4x 2.0 Type-A

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/16716
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 851e7f77e4)
Link: https://github.com/openwrt/openwrt/pull/17097
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2024-11-28 18:48:51 +00:00

107 lines
2.9 KiB
Diff

From 7bfe3404a02923ca3858abf56b18a098b4be33b2 Mon Sep 17 00:00:00 2001
From: Christophe Roullier <christophe.roullier@st.com>
Date: Wed, 10 Nov 2021 17:39:40 +0100
Subject: [PATCH] net: ethernet: stmmac: stm32: support the phy-supply
regulator binding
Configure the phy regulator if defined by the "phy-supply" DT phandle.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
.../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 51 ++++++++++++++++++-
1 file changed, 50 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -14,6 +14,7 @@
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include <linux/pm_wakeirq.h>
#include <linux/regmap.h>
#include <linux/slab.h>
@@ -92,6 +93,7 @@ struct stm32_dwmac {
u32 mode_reg; /* MAC glue-logic mode register */
u32 mode_mask;
struct regmap *regmap;
+ struct regulator *regulator;
u32 speed;
const struct stm32_ops *ops;
struct device *dev;
@@ -374,6 +376,16 @@ static int stm32_dwmac_parse_data(struct
dev_dbg(dev, "Warning sysconfig register mask not set\n");
}
+ dwmac->regulator = devm_regulator_get_optional(dev, "phy");
+ if (IS_ERR(dwmac->regulator)) {
+ if (PTR_ERR(dwmac->regulator) == -EPROBE_DEFER) {
+ dev_dbg(dev, "phy regulator is not available yet, deferred probing\n");
+ return -EPROBE_DEFER;
+ }
+ dev_dbg(dev, "no regulator found\n");
+ dwmac->regulator = NULL;
+ }
+
return err;
}
@@ -439,6 +451,28 @@ static int stm32mp1_parse_data(struct st
return err;
}
+static int phy_power_on(struct stm32_dwmac *bsp_priv, bool enable)
+{
+ int ret;
+ struct device *dev = bsp_priv->dev;
+
+ if (!bsp_priv->regulator)
+ return 0;
+
+ if (enable) {
+ ret = regulator_enable(bsp_priv->regulator);
+ if (ret)
+ dev_err(dev, "fail to enable phy-supply\n");
+ } else {
+ ret = regulator_disable(bsp_priv->regulator);
+ if (ret)
+ dev_err(dev, "fail to disable phy-supply\n");
+ }
+
+ return 0;
+}
+
+
static int stm32_dwmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
@@ -480,12 +514,18 @@ static int stm32_dwmac_probe(struct plat
if (ret)
return ret;
- ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+ ret = phy_power_on(plat_dat->bsp_priv, true);
if (ret)
goto err_clk_disable;
+ ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+ if (ret)
+ goto err_gmac_powerdown;
+
return 0;
+err_gmac_powerdown:
+ phy_power_on(plat_dat->bsp_priv, false);
err_clk_disable:
stm32_dwmac_clk_disable(dwmac, false);
@@ -506,6 +546,8 @@ static void stm32_dwmac_remove(struct pl
dev_pm_clear_wake_irq(&pdev->dev);
device_init_wakeup(&pdev->dev, false);
}
+
+ phy_power_on(priv->plat->bsp_priv, false);
}
static int stm32mp1_suspend(struct stm32_dwmac *dwmac)