openwrt/target/linux/generic/pending-6.6/487-mtd-spinand-Add-support-for-Etron-EM73D044VCx.patch
Bohdan Chubuk f483de4767
generic: mtd: spinand: add support for FORESEE F35SQA002G
Add support for FORESEE F35SQA002G SPI NAND.
Datasheet:
  https://www.longsys.com/uploads/LM-00006FORESEEF35SQA002GDatasheet_1650183701.pdf

Refresh all affected patch with make target/linux/refresh.

Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Bohdan Chubuk <chbgdn@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16915
(cherry picked from commit 5348e2e81a)
Link: https://github.com/openwrt/openwrt/pull/17188
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-12-06 15:12:42 +01:00

171 lines
5.2 KiB
Diff

From f32085fc0b87049491b07e198d924d738a1a2834 Mon Sep 17 00:00:00 2001
From: Daniel Danzberger <daniel@dd-wrt.com>
Date: Wed, 3 Aug 2022 17:31:03 +0200
Subject: [PATCH] mtd: spinand: Add support for Etron EM73D044VCx
Airoha is a new ARM platform based on Cortex-A53 which has recently been
merged into linux-next.
Due to BootROM limitations on this platform, the Cortex-A53 can't run in
Aarch64 mode and code must be compiled for 32-Bit ARM.
This support is based mostly on those linux-next commits backported
for kernel 5.15.
Patches:
1 - platform support = linux-next
2 - clock driver = linux-next
3 - gpio driver = linux-next
4 - linux,usable-memory-range dts support = linux-next
5 - mtd spinand driver
6 - spi driver
7 - pci driver (kconfig only, uses mediatek PCI) = linux-next
Still missing:
- Ethernet driver
- Sysupgrade support
A.t.m there exists one subtarget EN7523 with only one evaluation
board.
The initramfs can be run with the following commands from u-boot:
-
u-boot> setenv bootfile \
openwrt-airoha-airoha_en7523-evb-initramfs-kernel.bin
u-boot> tftpboot
u-boot> bootm 0x81800000
-
Submitted-by: Daniel Danzberger <daniel@dd-wrt.com>
--- a/drivers/mtd/nand/spi/Makefile
+++ b/drivers/mtd/nand/spi/Makefile
@@ -1,4 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-spinand-objs := core.o alliancememory.o ato.o esmt.o foresee.o gigadevice.o macronix.o
-spinand-objs += micron.o paragon.o toshiba.o winbond.o xtx.o
+spinand-objs := core.o alliancememory.o ato.o esmt.o etron.o foresee.o gigadevice.o
+spinand-objs += macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -940,6 +940,7 @@ static const struct spinand_manufacturer
&alliancememory_spinand_manufacturer,
&ato_spinand_manufacturer,
&esmt_c8_spinand_manufacturer,
+ &etron_spinand_manufacturer,
&foresee_spinand_manufacturer,
&gigadevice_spinand_manufacturer,
&macronix_spinand_manufacturer,
--- /dev/null
+++ b/drivers/mtd/nand/spi/etron.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mtd/spinand.h>
+
+#define SPINAND_MFR_ETRON 0xd5
+
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+static int etron_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 72;
+ oobregion->length = 56;
+
+ return 0;
+}
+
+static int etron_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 1;
+ oobregion->length = 71;
+
+ return 0;
+}
+
+static int etron_ecc_get_status(struct spinand_device *spinand, u8 status)
+{
+ switch (status & STATUS_ECC_MASK) {
+ case STATUS_ECC_NO_BITFLIPS:
+ return 0;
+
+ case STATUS_ECC_HAS_BITFLIPS:
+ /* Between 1-7 bitflips were corrected */
+ return 7;
+
+ case STATUS_ECC_MASK:
+ /* Maximum bitflips were corrected */
+ return 8;
+
+ case STATUS_ECC_UNCOR_ERROR:
+ return -EBADMSG;
+ }
+
+ return -EINVAL;
+}
+
+static const struct mtd_ooblayout_ops etron_ooblayout = {
+ .ecc = etron_ooblayout_ecc,
+ .free = etron_ooblayout_free,
+};
+
+static const struct spinand_info etron_spinand_table[] = {
+ SPINAND_INFO("EM73D044VCx",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x1f),
+ // bpc, pagesize, oobsize, pagesperblock, bperlun, maxbadplun, ppl, lpt, #t
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&etron_ooblayout, etron_ecc_get_status)),
+};
+
+static const struct spinand_manufacturer_ops etron_spinand_manuf_ops = {
+};
+
+const struct spinand_manufacturer etron_spinand_manufacturer = {
+ .id = SPINAND_MFR_ETRON,
+ .name = "Etron",
+ .chips = etron_spinand_table,
+ .nchips = ARRAY_SIZE(etron_spinand_table),
+ .ops = &etron_spinand_manuf_ops,
+};
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -263,6 +263,7 @@ struct spinand_manufacturer {
extern const struct spinand_manufacturer alliancememory_spinand_manufacturer;
extern const struct spinand_manufacturer ato_spinand_manufacturer;
extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer;
+extern const struct spinand_manufacturer etron_spinand_manufacturer;
extern const struct spinand_manufacturer foresee_spinand_manufacturer;
extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
extern const struct spinand_manufacturer macronix_spinand_manufacturer;