mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-04 10:10:47 +00:00
64170ab925
03e44dc mt76x2: remove unnecessary headroom check cc70498 mt76x2: clarify queue selection field b056a78 dma: fix endian issue in mt76_dma_get_buf f020a60 mt7603: support loading the entire EEPROM from OTP 29b08d3 mt7603: fix endian issue in mt7603_mcu_set_timing dce8aac mt7603: fix endian issue in mt7603_mac_fill_rx f22273b mt7603: init WTBL entry before setting capabilities da8e796 mt7603: check wtbl busy status and stop/start tx queues when clearing sta entry e54add5 mt7603: move napi/tasklet enable/disable outside of the locked section 59ce2b4 mt7603: set tx vif own MAC index (needed for beacons) 93ce124 mt7603: enable beacons for other virtual interfaces c91e660 mt7603: set secondary beacon time offsets Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is the buildsystem for the LEDE Linux distribution. Please use "make menuconfig" to choose your preferred configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your LEDE Community http://www.lede-project.org