Allen Zhao 640b0b79ff mediatek: filogic: add Unielec U7981-01 support ... Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 8GB eMMC or 128 MB SPI-NAND RAM: 256MB Ethernet: 5x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset USB: M.2(B-key) for 4G/5G Module Power: DC 12V 1A UART: 3.3v, 115200n8 -------------------------- | Layout | | ----------------- | | 4 | VCC RX TX GND | <= | | ----------------- | -------------------------- The U-boot menu will automatically appear at startup, and then select the required options through UP/DOWN Key. NAND Flash and eMMC Flash instructions: 1. Set your computers IP adress to 192.168.1.2. 2. Run a TFTP server providing the sysupgrade.bin image. 3. Power on the router, into the U-Boot menu. 4. Select "2. Upgrade firmware" 5. Update sysupgrade.bin file name, input server IP and input device IP (if they deviate from the defaults) 6. Wait for automatic startup after burning Signed-off-by: Allen Zhao <allenzhao@unielecinc.com>		2024-03-25 18:14:19 +00:00
..
imagebuilder	Revert "build: align SOURCE path for build system and SDK"	2024-02-12 19:03:17 +00:00
linux	mediatek: filogic: add Unielec U7981-01 support	2024-03-25 18:14:19 +00:00
llvm-bpf
sdk	tools: add ledumon and ledhwbmon packages	2023-12-12 19:35:03 +01:00
toolchain	treewide: add ORIG_PATH variable	2023-06-05 08:31:47 +02:00
Config.in	generic: groundwork for RISC-V	2023-05-28 13:19:10 +02:00
Makefile	build: add $(STAGING_DIR) and $(BIN_DIR) preparation to target and package subdir compile dependencies	2024-03-03 23:13:59 +01:00