INAGAKI Hiroshi 337e942290 ramips: add support for ELECOM WRC-2533GS2 ... ELECOM WRC-2533GS2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB (NT5CC64M16GP-DI) - Flash : SPI-NOR 16 MiB (MX25L12835FM2I-10G) - WLAN : 2.4/5GHz 4T4R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LEDs/Keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX from ethernet port side - 57600n8 - Power : 12 VDC, 1.5 A Flash instruction using factory image: 1. Boot WRC-2533GS2 normally with "Router" mode 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~120 seconds to complete flashing MAC Addresses: LAN : 04:AB:18:xx:xx:FB (Factory, 0xFFF4 (hex)) WAN : 04:AB:18:xx:xx:FC (Factory, 0xFFFA (hex)) 2.4 GHz : 04:AB:18:xx:xx:FD (Factory, 0x4 (hex)) 5 GHz : 04:AB:18:xx:xx:FE (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2022-02-11 22:30:04 +09:00
..
lzma-loader	ramips: lzma-loader: make FLASH_START configurable	2020-09-03 14:15:30 +02:00
common-tp-link.mk	treewide: call check-size before append-metadata	2021-07-10 19:40:10 +02:00
Makefile	ramips: move KERNEL_LOADADDR into Device/Default	2022-02-08 23:23:53 +09:00
mt76x8.mk	ramips: correct vendor name for COMFAST/Joowin	2022-01-22 01:17:04 +01:00
mt7620.mk	ramips: add support for Wavlink WL-WN535K1	2022-01-30 01:15:23 +09:00
mt7621.mk	ramips: add support for ELECOM WRC-2533GS2	2022-02-11 22:30:04 +09:00
rt288x.mk	ramips: tidy up image subtarget Makefiles	2020-05-08 18:58:39 +02:00
rt305x.mk	ramips: Switch Teltonika RUT5xx to kernel GPIO-line watchdog driver	2022-02-03 22:27:15 +01:00
rt3883.mk	ramips: provide default BLOCKSIZE for Device/seama	2021-08-30 00:37:47 +02:00