openwrt/target/linux/ipq40xx/files/arch/arm/boot/dts
Pawel Dembicki a91ab8bc05 ipq40xx: add support for ZTE MF286D
ZTE MF286D is a LTE router with four gigabit ethernet ports
and integrated QMI mPCIE modem.

Hardware specification:

  - CPU: IPQ4019
  - RAM: 256MB
  - Flash: NAND 128MB + NOR 2MB
  - WLAN1:  Qualcomm Atheros QCA4019 2.4GHz 802.11bgn 2x2:2
  - WLAN2:  Qualcomm Atheros QCA4019 5GHz 802.11anac 2x2:2
  - LTE: mPCIe cat 12 card (Modem chipset MDM9250)
  - LAN: 4 Gigabit Ports
  - USB: 1x USB2.0 (regular port). 1x USB3.0 (mpcie - used by the modem)
  - Serial console: X8 connector 115200 8n1

Known issues:

  - Many LEDs are driven by the modem. Only internal LEDs and wifi LEDs
    are driven by cpu.
  - Wifi LED is triggered by phy0tpt only
  - No VoIP support
  - LAN1/WAN port is configured as WAN
  - ZTE gives only one MAC per device. Use +1/+2/+3 increment for WAN
    and WLAN0/1

Opening the case:

1. Take of battery lid (no battery support for this model, battery cage
   is dummy).
2. Unscrew screw placed behind battery lid.
3. Take off back cover. It attached with multiple plastic clamps.
4. Unscrew four more screws hidden behind back case.
5. Remove front panel from blue chassis. There are more plastic
   clamps.
6. Unscrew two boards, which secures the PCB in the chassis.
7. Extract board from blue chassis.

Console connection (X8 connector):

1. Parameters: 115200 8N1
2. Pin description: (from closest pin to X8 descriptor to farthest)
    - VCC (3.3V)
    - TX
    - RX
    - GND

Install Instructions:

Serial + initramfs:
1. Place OpenWrt initramfs image for the device on a TFTP in
   the server's root. This example uses Server IP: 192.168.1.3
2. Connect serial console (115200,8n1) to X8 connector.
3. Connect TFTP server to RJ-45 port.
4. Stop in u-Boot and run u-Boot commands:
	setenv serverip 192.168.1.3
	setenv ipaddr 192.168.1.72
	set fdt_high 0x85000000
	tftp openwrt-ipq40xx-generic-zte_mf286d-initramfs-fit-zImage.itb
	bootm $loadaddr
5. Please make backup of original partitions, if you think about revert
   to stock.
6. Login via ssh or serial and remove stock partitions:
	ubiattach -m 9
	ubirmvol /dev/ubi0 -N ubi_rootfs
	ubirmvol /dev/ubi0 -N ubi_rootfs_data
7. Install image via "sysupgrade -n".

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(cosmetic changes to the commit message)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-05 00:44:35 +01:00
..
qcom-ipq4018-a42.dts ipq40xx: DTS style updates for OpenMesh devices 2020-11-23 13:44:47 +01:00
qcom-ipq4018-ap120c-ac.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-cap-ac.dts ipq40xx: add MikroTik cAP ac support 2022-02-01 23:18:58 +01:00
qcom-ipq4018-cs-w3-wd1200g-eup.dts ipq40xx: nvmem cells for EZVIZ CS-W3-WD1200G EUP 2021-12-04 00:36:47 +01:00
qcom-ipq4018-dap-2610.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4018-ea6350v3.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-eap1300.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-ecw5211.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-emd1.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4018-emr3500.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4018-ens620ext.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4018-ex61x0v2.dtsi ipq40xx: utilize nvmem on Netgear EX61X0 v2 Series 2021-11-28 01:13:08 +01:00
qcom-ipq4018-ex6100v2.dts ipq40xx: tidy up dts-v1 statements 2020-09-25 21:10:41 +02:00
qcom-ipq4018-ex6150v2.dts ipq40xx: tidy up dts-v1 statements 2020-09-25 21:10:41 +02:00
qcom-ipq4018-fritzbox-4040.dts ipq40xx: dts: convert PHY GPIO bindings 2020-12-23 16:36:08 +01:00
qcom-ipq4018-gl-ap1300.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-hap-ac2.dts ipq40xx: fix hard_config partition size on MikroTik hAP-ac2 2021-05-08 12:18:43 +02:00
qcom-ipq4018-jalapeno.dts
qcom-ipq4018-jalapeno.dtsi ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-magic-2-wifi-next.dts ipq40xx: add support for devolo Magic 2 WiFi next 2020-12-22 20:55:40 +01:00
qcom-ipq4018-meshpoint-one.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4018-nbg6617.dts ipq40xx: increase SPI frequency for Zyxel NBG6617 2021-07-11 01:38:52 +02:00
qcom-ipq4018-pa1200.dts ipq40xx: add support for Plasma Cloud PA1200 2020-12-22 19:11:50 +01:00
qcom-ipq4018-rt-ac58u.dts ipq40xx: add support for ASUS RT-ACRH17/RT-AC42U 2022-01-15 17:21:01 +01:00
qcom-ipq4018-rutx10.dts ipq40xx: Add support for Teltonika RUTX10 2021-11-28 18:39:01 +01:00
qcom-ipq4018-rutx.dtsi ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-sxtsq-5-ac.dts ipq40xx: add support for MikroTik SXTsq 5 ac 2021-04-29 10:55:07 +02:00
qcom-ipq4018-wac510.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-wre6606.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4018-wrtq-329acn.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-a62.dts ipq40xx: DTS style updates for OpenMesh devices 2020-11-23 13:44:47 +01:00
qcom-ipq4019-cm520-79f.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-e2600ac-c1.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-e2600ac-c2.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-e2600ac.dtsi ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-ea8300.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4019-eap2200.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-fritzbox-7530.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4019-fritzrepeater-1200.dts ipq40xx: fix FRITZRepeater 1200 RGMII delay 2021-07-17 20:06:49 +02:00
qcom-ipq4019-fritzrepeater-3000.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4019-gl-b2200.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-habanero-dvk.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-hap-ac3.dts ipq40xx: add support for MikroTik hAP ac3 2021-11-28 17:19:52 +01:00
qcom-ipq4019-lhgg-60ad.dts ipq40xx: add MikroTik LHGG-60ad outdoor 802.11ad (60GHz) dish 2021-12-02 19:46:14 +00:00
qcom-ipq4019-map-ac2200.dts ipq40xx: fix 5Ghz tx/rx power on the ASUS MAP-AC2200 2020-12-13 16:12:45 +01:00
qcom-ipq4019-mf286d.dts ipq40xx: add support for ZTE MF286D 2022-02-05 00:44:35 +01:00
qcom-ipq4019-mr8300.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4019-oap100.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-orbi.dtsi ipq40xx: add support for Netgear SRR60/SRS60 and RBR50/RBS50 2021-11-01 00:56:51 +01:00
qcom-ipq4019-pa2200.dts ipq40xx: add support for Plasma Cloud PA2200 2020-12-22 19:11:50 +01:00
qcom-ipq4019-r619ac-64m.dts ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0) 2021-11-14 14:28:34 +01:00
qcom-ipq4019-r619ac-128m.dts ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0) 2021-11-14 14:28:34 +01:00
qcom-ipq4019-r619ac.dtsi ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-rbr50.dts ipq40xx: add support for Netgear SRR60/SRS60 and RBR50/RBS50 2021-11-01 00:56:51 +01:00
qcom-ipq4019-rbs50.dts ipq40xx: add support for Netgear SRR60/SRS60 and RBR50/RBS50 2021-11-01 00:56:51 +01:00
qcom-ipq4019-rt-ac42u.dts ipq40xx: rename RT-AC42U WLAN/LAN LEDs 2022-01-17 20:38:43 +09:00
qcom-ipq4019-rtl30vw.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-srr60.dts ipq40xx: add support for Netgear SRR60/SRS60 and RBR50/RBS50 2021-11-01 00:56:51 +01:00
qcom-ipq4019-srs60.dts ipq40xx: add support for Netgear SRR60/SRS60 and RBR50/RBS50 2021-11-01 00:56:51 +01:00
qcom-ipq4019-u4019-32m.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-u4019.dtsi ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-wpj419.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-wtr-m2133hp.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-xx8300.dtsi ipq40xx: tidy up dts-v1 statements 2020-09-25 21:10:41 +02:00
qcom-ipq4028-wpj428.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4029-ap-303.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4029-ap-303h.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4029-ap-365.dts ipq40xx: AP-365: fix non-existent node or label "macaddr_mfginfo_1d" 2022-01-16 13:14:58 +01:00
qcom-ipq4029-aruba-glenmorangie.dtsi ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4029-gl-b1300.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4029-gl-s1300.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4029-mr33.dts ipq40xx: MR33: Fix LP5562 LED driver probe 2021-10-23 18:50:25 +02:00