mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
b2aca5a263
ar9344_openmesh_mr600-v1.dts:40.10-44.5: Warning (gpios_property): /leds-ath9k/wifi2g: Missing property '#gpio-cells' in node /ahb/pcie-controller@180c0000/wifi@0,0 or bad phandle => added gpio-controller + #gpio-cells qca955x_zyxel_nbg6x16.dtsi:121.3-13: Warning (reg_format): /ahb/usb@1b000000/port@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) ../dts/qca955x_zyxel_nbg6x16.dtsi:131.3-13: Warning (reg_format): /ahb/usb@1b400000/port@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) qca955x_zyxel_nbg6x16.dtsi:120.20-123.4: Warning (avoid_default_addr_size): /ahb/usb@1b000000/port@1: Relying on default #address-cells value => ath79's usb-nodes are missing the address- and size-cells properties. These are needed for usb led trigger support. ar7242_ubnt_sw.dtsi:54.4-14: Warning (reg_format): /gpio_spi/gpio_spi@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) => the #address-cells and #size-cells had to be nudged. qca9531_dlink_dch-g020-a1.dts:19.6-39.4: Warning (i2c_bus_bridge): /i2c: incorrect #size-cells for I2C bus => #size-cells = <0>; Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
90 lines
1.3 KiB
Plaintext
90 lines
1.3 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "ar724x.dtsi"
|
|
|
|
/ {
|
|
usb_phy: usb-phy {
|
|
compatible = "qca,ar7200-usb-phy";
|
|
|
|
reset-names = "usb-phy", "usb-suspend-override";
|
|
resets = <&rst 4>, <&rst 3>;
|
|
|
|
#phy-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&gpio {
|
|
ngpios = <20>;
|
|
};
|
|
|
|
&ahb {
|
|
usb: usb@1b000000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x1b000000 0x1000>;
|
|
|
|
interrupts = <3>;
|
|
|
|
resets = <&rst 5>;
|
|
reset-names = "usb-host";
|
|
|
|
has-transaction-translator;
|
|
caps-offset = <0x100>;
|
|
|
|
phy-names = "usb-phy";
|
|
phys = <&usb_phy>;
|
|
|
|
status = "disabled";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&mdio0 {
|
|
resets = <&rst 22>;
|
|
reset-names = "mdio";
|
|
};
|
|
|
|
ð0 {
|
|
compatible = "qca,ar7242-eth", "syscon";
|
|
|
|
pll-data = <0x16000000 0x00000101 0x00001616>;
|
|
pll-reg = <0x4 0x2c 17>;
|
|
pll-handle = <&pll>;
|
|
|
|
resets = <&rst 9>;
|
|
reset-names = "mac";
|
|
};
|
|
|
|
&mdio1 {
|
|
resets = <&rst 23>;
|
|
reset-names = "mdio";
|
|
builtin-switch;
|
|
|
|
builtin_switch: switch0@1f {
|
|
compatible = "qca,ar7240sw";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x1f>;
|
|
resets = <&rst 8>;
|
|
reset-names = "switch";
|
|
qca,mib-poll-interval = <500>;
|
|
};
|
|
};
|
|
|
|
ð1 {
|
|
compatible = "qca,ar7242-eth", "syscon";
|
|
|
|
resets = <&rst 13>;
|
|
reset-names = "mac";
|
|
|
|
phy-mode = "gmii";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|