openwrt/target/linux/ath79/generic
Roger Pueyo Centelles 633c4304ad ath79: add support for Ubiquiti NanoStation Loco M (XW)
This commit adds support for the NanoStation Loco M2/M5 XW devices
on the ath79 target (support was long ago available on ar71xx).

Specifications:

 - AR9342 SoC @ 535 MHz
 - 64 MB RAM
 - 8 MB SPI flash
 - 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
 - AR8032 switch
 - 2T2R 5 GHz radio, 22 dBm
 - 13 dBi built-in antenna
 - POWER/LAN green LEDs
 - 4x RSSI LEDs (red, orange, green, green)
 - UART (115200 8N1) on PCB

Flashing via TFTP:

 - Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
   button on the device or on the PoE supply pressed
 - Power on the device via PoE (keep reset button pressed)
 - Keep pressing until LEDs flash alternatively LED1+LED3 =>
   LED2+LED4 => LED1+LED3, etc.
 - Release reset button
 - The device starts a TFTP server at 192.168.1.20
 - Set a static IP on the computer (e.g., 192.168.1.21/24)
 - Upload via tftp the factory image:
   $ tftp 192.168.1.20
   tftp> bin
   tftp> trace
   tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-xw-squashfs-factory.bin

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-01-31 17:24:31 +01:00
..
base-files ath79: add support for Ubiquiti NanoStation Loco M (XW) 2020-01-31 17:24:31 +01:00
profiles ath79: add new OF only target for QCA MIPS silicon 2018-05-07 08:06:51 +02:00
config-default ath79: add support for MikroTik RouterBOARD wAP G-5HacT2HnD 2020-01-23 15:28:03 +01:00
target.mk ath79: add support for MikroTik RouterBOARD wAP G-5HacT2HnD 2020-01-23 15:28:03 +01:00