openwrt/target/linux/ramips/dts/mt7620a_phicomm_psg1218b.dts
Chuanhong Guo b756ea2a90 ramips: replace pinctrl property names
Upstream pinctrl driver in drivers/staging uses
groups/function/ralink,num-gpios instead of
ralink,group/ralink,function/ralink,nr-gpio
Replace these properties in dts as well as the pinctrl driver in
patches-4.14.
This commit is created using:
sed -i 's/ralink,group/groups/g'
sed -i 's/ralink,function/function/g'
sed -i 's/ralink,nr-gpio/ralink,num-gpios/g'

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2020-04-12 22:29:17 +08:00

50 lines
898 B
Plaintext

/dts-v1/;
#include "mt7620a_phicomm_psg1218.dtsi"
/ {
compatible = "phicomm,psg1218b", "phicomm,psg1218", "ralink,mt7620a-soc";
model = "Phicomm PSG1218 rev.B";
aliases {
led-boot = &led_blue;
led-failsafe = &led_blue;
led-running = &led_blue;
led-upgrade = &led_blue;
};
leds {
compatible = "gpio-leds";
led_blue: blue {
label = "psg1218b:blue:status";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
default-state = "on";
};
yellow {
label = "psg1218b:yellow:status";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
red {
label = "psg1218b:red:status";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
};
};
&state_default {
gpio {
groups = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa";
function = "gpio";
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x28>;
mediatek,portmap = "llllw";
};