openwrt/target/linux/ipq806x/patches-5.10/099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch
Ansuel Smith 62cc66fa67 ipq806x: introduce nandc boot layout mode
ipq806x have different ecc configuration for boot partition and rootfs partition. Add support for this to fix IO error on mtd block scan.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-05-07 07:05:16 +02:00

48 lines
1.8 KiB
Diff

From 6fb003a7a117f97a35b078ba726c84adeae29c4c Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Wed, 10 Feb 2021 10:54:19 +0100
Subject: [PATCH 2/2] Documentation: devicetree: mtd: qcom_nandc: document
qcom,boot_layout_size binding
Document new qcom,boot_layout_size binding used to apply special
read/write confituation to boots partitions.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
Documentation/devicetree/bindings/mtd/qcom_nandc.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
index 5647913d8837..3cf1dd5ebad2 100644
--- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
@@ -56,6 +56,15 @@ Optional properties:
be used according to chip requirement and available
OOB size.
+EBI2 specific properties:
+- nand-is-boot-medium: nand contains boot partitions and different ecc configuration
+ should be used for these partitions.
+- qcom,boot_pages_size: should contain the size of the total boot partitions
+ where the boot layout read/write specific configuration
+ should be used. The boot layout is considered from the
+ start of the nand to the value set in this binding.
+ Only used in combination with 'nand-is-boot-medium'.
+
Each nandcs device node may optionally contain a 'partitions' sub-node, which
further contains sub-nodes describing the flash partition mapping. See
partition.txt for more detail.
@@ -84,6 +93,9 @@ nand-controller@1ac00000 {
nand-ecc-strength = <4>;
nand-bus-width = <8>;
+ nand-is-boot-medium;
+ qcom,boot_pages_size: <0x58a0000>;
+
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
--
2.29.2