mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-01 03:26:51 +00:00
029093a302
This target has full device tree support, thus reducing the number of patches needed for bcm63xx, in which there's a patch for every board. The intention is to start with a minimal amount of downstream patches and start upstreaming all of them. Current status: - Enabling EHCI/OHCI on BCM6358 causes a kernel panic. - BCM63268 lacks Timer Clocks/Reset support. - No PCI/PCIe drivers. - No ethernet drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
428 lines
8.6 KiB
Plaintext
428 lines
8.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/clock/bcm63268-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/bcm63268-interrupt-controller.h>
|
|
#include <dt-bindings/reset/bcm63268-reset.h>
|
|
#include <dt-bindings/soc/bcm63268-pm.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "brcm,bcm63268";
|
|
|
|
aliases {
|
|
nflash = &nflash;
|
|
pinctrl = &pinctrl;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
spi0 = &lsspi;
|
|
spi1 = &hsspi;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200n8 earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
clocks {
|
|
periph_osc: periph-osc {
|
|
compatible = "fixed-clock";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
clock-frequency = <50000000>;
|
|
clock-output-names = "periph";
|
|
};
|
|
|
|
hsspi_osc: hsspi-osc {
|
|
compatible = "fixed-clock";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
clock-frequency = <400000000>;
|
|
clock-output-names = "hsspi_osc";
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
mips-hpt-frequency = <200000000>;
|
|
|
|
cpu@0 {
|
|
compatible = "brcm,bmips4350", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "brcm,bmips4350", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
cpu_intc: interrupt-controller {
|
|
#address-cells = <0>;
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0 0>;
|
|
};
|
|
|
|
ubus {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
compatible = "simple-bus";
|
|
ranges;
|
|
|
|
periph_clk: clock-controller@10000004 {
|
|
compatible = "brcm,bcm63268-clocks";
|
|
reg = <0x10000004 0x4>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pll_cntl: syscon@10000008 {
|
|
compatible = "syscon";
|
|
reg = <0x10000008 0x4>;
|
|
native-endian;
|
|
};
|
|
|
|
syscon-reboot {
|
|
compatible = "syscon-reboot";
|
|
regmap = <&pll_cntl>;
|
|
offset = <0x0>;
|
|
mask = <0x1>;
|
|
};
|
|
|
|
periph_rst: reset-controller@10000010 {
|
|
compatible = "brcm,bcm6345-reset";
|
|
reg = <0x10000010 0x4>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
ext_intc: interrupt-controller@10000018 {
|
|
#address-cells = <1>;
|
|
compatible = "brcm,bcm6345-ext-intc";
|
|
reg = <0x10000018 0x4>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
interrupts = <BCM63268_IRQ_EXT0>,
|
|
<BCM63268_IRQ_EXT1>,
|
|
<BCM63268_IRQ_EXT2>,
|
|
<BCM63268_IRQ_EXT3>;
|
|
};
|
|
|
|
periph_intc: interrupt-controller@10000020 {
|
|
#address-cells = <1>;
|
|
compatible = "brcm,bcm6345-l1-intc";
|
|
reg = <0x10000020 0x20>,
|
|
<0x10000040 0x20>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-parent = <&cpu_intc>;
|
|
interrupts = <2>, <3>;
|
|
};
|
|
|
|
wdt: watchdog@1000009c {
|
|
compatible = "brcm,bcm7038-wdt";
|
|
reg = <0x1000009c 0xc>;
|
|
|
|
clocks = <&periph_osc>;
|
|
|
|
timeout-sec = <30>;
|
|
};
|
|
|
|
pinctrl: pin-controller@100000c0 {
|
|
compatible = "brcm,bcm63268-pinctrl";
|
|
reg = <0x100000c0 0x8>,
|
|
<0x100000c8 0x8>,
|
|
<0x100000d0 0x4>,
|
|
<0x100000d8 0x4>,
|
|
<0x100000dc 0x4>,
|
|
<0x100000f8 0x4>;
|
|
reg-names = "dirout", "dat", "led", "mode",
|
|
"ctrl", "basemode";
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-parent = <&ext_intc>;
|
|
interrupts = <0 0>, <1 0>, <2 0>, <3 0>;
|
|
interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35";
|
|
|
|
pinctrl_serial_led: serial_led {
|
|
pinctrl_serial_led_clk: serial_led_clk {
|
|
function = "serial_led_clk";
|
|
pins = "gpio0";
|
|
};
|
|
|
|
pinctrl_serial_led_data: serial_led_data {
|
|
function = "serial_led_data";
|
|
pins = "gpio1";
|
|
};
|
|
};
|
|
|
|
pinctrl_hsspi_cs4: hsspi_cs4 {
|
|
function = "hsspi_cs4";
|
|
pins = "gpio16";
|
|
};
|
|
|
|
pinctrl_hsspi_cs5: hsspi_cs5 {
|
|
function = "hsspi_cs5";
|
|
pins = "gpio17";
|
|
};
|
|
|
|
pinctrl_hsspi_cs6: hsspi_cs6 {
|
|
function = "hsspi_cs6";
|
|
pins = "gpio8";
|
|
};
|
|
|
|
pinctrl_hsspi_cs7: hsspi_cs7 {
|
|
function = "hsspi_cs7";
|
|
pins = "gpio9";
|
|
};
|
|
|
|
pinctrl_adsl_spi: adsl_spi {
|
|
pinctrl_adsl_spi_miso: adsl_spi_miso {
|
|
function = "adsl_spi_miso";
|
|
pins = "gpio18";
|
|
};
|
|
|
|
pinctrl_adsl_spi_mosi: adsl_spi_mosi {
|
|
function = "adsl_spi_mosi";
|
|
pins = "gpio19";
|
|
};
|
|
};
|
|
|
|
pinctrl_vreq_clk: vreq_clk {
|
|
function = "vreq_clk";
|
|
pins = "gpio22";
|
|
};
|
|
|
|
pinctrl_pcie_clkreq_b: pcie_clkreq_b {
|
|
function = "pcie_clkreq_b";
|
|
pins = "gpio23";
|
|
};
|
|
|
|
pinctrl_robosw_led_clk: robosw_led_clk {
|
|
function = "robosw_led_clk";
|
|
pins = "gpio30";
|
|
};
|
|
|
|
pinctrl_robosw_led_data: robosw_led_data {
|
|
function = "robosw_led_data";
|
|
pins = "gpio31";
|
|
};
|
|
|
|
pinctrl_nand: nand {
|
|
function = "nand";
|
|
group = "nand_grp";
|
|
};
|
|
|
|
pinctrl_gpio35_alt: gpio35_alt {
|
|
function = "gpio35_alt";
|
|
pin = "gpio35";
|
|
};
|
|
|
|
pinctrl_dectpd: dectpd {
|
|
function = "dectpd";
|
|
group = "dectpd_grp";
|
|
};
|
|
|
|
pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 {
|
|
function = "vdsl_phy_override_0";
|
|
group = "vdsl_phy_override_0_grp";
|
|
};
|
|
|
|
pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 {
|
|
function = "vdsl_phy_override_1";
|
|
group = "vdsl_phy_override_1_grp";
|
|
};
|
|
|
|
pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 {
|
|
function = "vdsl_phy_override_2";
|
|
group = "vdsl_phy_override_2_grp";
|
|
};
|
|
|
|
pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 {
|
|
function = "vdsl_phy_override_3";
|
|
group = "vdsl_phy_override_3_grp";
|
|
};
|
|
|
|
pinctrl_dsl_gpio8: dsl_gpio8 {
|
|
function = "dsl_gpio8";
|
|
group = "dsl_gpio8";
|
|
};
|
|
|
|
pinctrl_dsl_gpio9: dsl_gpio9 {
|
|
function = "dsl_gpio9";
|
|
group = "dsl_gpio9";
|
|
};
|
|
};
|
|
|
|
uart0: serial@10000180 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x10000180 0x18>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM63268_IRQ_UART0>;
|
|
|
|
clocks = <&periph_osc>;
|
|
clock-names = "periph";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@100001a0 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x100001a0 0x18>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM63268_IRQ_UART1>;
|
|
|
|
clocks = <&periph_osc>;
|
|
clock-names = "periph";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
nflash: nand@10000200 {
|
|
compatible = "brcm,nand-bcm6368",
|
|
"brcm,brcmnand-v4.0",
|
|
"brcm,brcmnand";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x10000200 0x180>,
|
|
<0x10000600 0x200>,
|
|
<0x100000b0 0x10>;
|
|
reg-names = "nand",
|
|
"nand-cache",
|
|
"nand-int-base";
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM63268_IRQ_NAND>;
|
|
|
|
clocks = <&periph_clk BCM63268_CLK_NAND>;
|
|
clock-names = "nand";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_nand>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
lsspi: spi@10000800 {
|
|
compatible = "brcm,bcm6358-spi";
|
|
reg = <0x10000800 0x70c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM63268_IRQ_LSSPI>;
|
|
|
|
clocks = <&periph_clk BCM63268_CLK_SPI>;
|
|
clock-names = "spi";
|
|
|
|
resets = <&periph_rst BCM63268_RST_SPI>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
hsspi: spi@10001000 {
|
|
compatible = "brcm,bcm6328-hsspi";
|
|
reg = <0x10001000 0x600>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM63268_IRQ_HSSPI>;
|
|
|
|
clocks = <&periph_clk BCM63268_CLK_HSSPI>,
|
|
<&hsspi_osc>;
|
|
clock-names = "hsspi",
|
|
"pll";
|
|
|
|
resets = <&periph_rst BCM63268_RST_SPI>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
periph_pwr: power-controller@1000184c {
|
|
compatible = "brcm,bcm63268-power-controller";
|
|
reg = <0x1000184c 0x4>;
|
|
#power-domain-cells = <1>;
|
|
};
|
|
|
|
leds: led-controller@10001900 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,bcm6328-leds";
|
|
reg = <0x10001900 0x24>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci: usb@10002500 {
|
|
compatible = "brcm,bcm63268-ehci", "generic-ehci";
|
|
reg = <0x10002500 0x100>;
|
|
big-endian;
|
|
ignore-oc;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM63268_IRQ_EHCI>;
|
|
|
|
phys = <&usbh 0>;
|
|
phy-names = "usb";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci: usb@10002600 {
|
|
compatible = "brcm,bcm63268-ohci", "generic-ohci";
|
|
reg = <0x10002600 0x100>;
|
|
big-endian;
|
|
no-big-frame-no;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM63268_IRQ_OHCI>;
|
|
|
|
phys = <&usbh 0>;
|
|
phy-names = "usb";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh: usb-phy@10002700 {
|
|
compatible = "brcm,bcm63268-usbh-phy";
|
|
reg = <0x10002700 0x38>;
|
|
|
|
#phy-cells = <1>;
|
|
|
|
clocks = <&periph_clk BCM63268_CLK_USBH>;
|
|
/* FIXME! <&timer_clk BCM63268_TCLK_USB_REF> */
|
|
clock-names = "usbh";
|
|
/* FIXME! usb_ref */
|
|
|
|
power-domains = <&periph_pwr BCM63268_POWER_DOMAIN_USBH>;
|
|
resets = <&periph_rst BCM63268_RST_USBH>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|