Chuanhong Guo 987a7e3175 ramips: fix lenovo newifi-y1 switch and LED config ... There are 3 ethernet ports on Y1. LAN1 on port1, LAN2 on port0 and WAN on port4. Use a standalone switch configuration to match this and use the switch trigger so that LAN LED could indicate the connetction status for both lan ports correctly. This patch also drop the internet led configuration, because there is a WAN led for port4 and eth0.2 isn't always used as WAN. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>		2018-01-09 22:09:26 +01:00
..
board.d	ramips: fix lenovo newifi-y1 switch and LED config	2018-01-09 22:09:26 +01:00
hotplug.d	ramips: use the ralink,mtd-eeprom device tree property	2016-11-09 20:22:59 +01:00
init.d	ramips: enablemodem: move /lib/ramips.sh to start()	2016-12-24 06:51:59 +01:00
uci-defaults	ramips: use rfkill for wps button on wlan only boards	2016-10-15 09:01:45 +02:00
diag.sh	ramips: firewrt: indicate boot status via LED	2018-01-09 22:09:26 +01:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00