openwrt/target/linux/brcm63xx/dts/a226m-fwb.dts
Jonas Gorski b82cb155fc brcm63xx: move buttons and leds to dts files
Register buttons and leds through DT for all available dts,
and remove them from the board files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: remove leds/buttons from board files
       fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw
       comment out spi-gpio and associated leds]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44566
2015-02-27 17:40:04 +00:00

108 lines
1.7 KiB
Plaintext

/dts-v1/;
/include/ "bcm6358.dtsi"
/ {
model = "Pirelli A226M-FWB";
compatible = "pirelli,a226m-fwb", "brcm,bcm6358";
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
wps {
label = "wps";
gpios = <&gpio1 2 1>;
linux,code = <0x211>;
};
reset {
label = "reset";
gpios = <&gpio1 5 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
voip_red {
label = "DWV-S0:red:VoIP";
gpios = <&gpio0 0 1>;
};
eth_red {
label = "DWV-S0:red:ethernet";
gpios = <&gpio0 1 1>;
};
dsl_green {
label = "DWV-S0:green:ADSL";
gpios = <&gpio0 2 1>;
};
usb_green {
label = "DWV-S0:green:USB";
gpios = <&gpio0 3 1>;
};
power_green {
label = "DWV-S0:green:power";
gpios = <&gpio0 4 1>;
default-state = "on";
};
power_red {
label = "DWV-S0:red:power";
gpios = <&gpio0 5 1>;
};
inet_red {
label = "DWV-S0:red:internet";
gpios = <&gpio0 6 1>;
};
inet_green {
label = "DWV-S0:green:internet";
gpios = <&gpio0 7 1>;
};
eth_green {
label = "DWV-S0:green:ethernet";
gpios = <&gpio0 8 1>;
};
voip_green {
label = "DWV-S0:green:VoIP";
gpios = <&gpio0 9 1>;
};
wifi_red {
label = "DWV-S0:red:wifi";
gpios = <&gpio0 10 1>;
};
usb_red {
label = "DWV-S0:red:USB";
gpios = <&gpio0 11 1>;
};
dsl_red {
label = "DWV-S0:red:ADSL";
gpios = <&gpio0 12 1>;
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
linux@20000 {
label = "linux";
reg = <0x020000 0xfc0000>;
};
nvram@fe0000 {
label = "nvram";
reg = <0xfe0000 0x020000>;
};
};