openwrt/target/linux/ramips/dts/mt7621_mediatek_ap-mt7621a-v60.dts
Shiji Yang 01996b785d ramips: clean up useless dts partition labels
The previous NVMEM eeprom conversions[1][2] left a lot of partition
labels that were no longer used. They can be removed now.

[1] https://github.com/openwrt/openwrt/pull/13584
[2] https://github.com/openwrt/openwrt/pull/13587

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-02-21 13:31:18 +01:00

174 lines
2.7 KiB
Plaintext

#include "mt7621.dtsi"
/ {
compatible = "mediatek,ap-mt7621a-v60", "mediatek,mt7621-soc";
model = "Mediatek AP-MT7621A-V60 EVB";
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "Audio-I2S";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&dailink0_master>;
simple-audio-card,frame-master = <&dailink0_master>;
simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Headphone", "Headphone Jack";
simple-audio-card,routing =
"LINPUT1", "Microphone Jack",
"RINPUT1", "Microphone Jack",
"Headphone Jack", "HP_L",
"Headphone Jack", "HP_R";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,cpu {
sound-dai = <&i2s>;
};
dailink0_master: simple-audio-card,codec {
sound-dai = <&codec>;
};
};
};
&state_default {
gpio {
groups = "uart2";
function = "gpio";
};
};
&pinctrl {
i2s_pins: i2s {
i2s {
groups = "uart3";
function = "i2s";
};
};
};
&i2c {
status = "okay";
codec: wm8960@1a {
#sound-dai-cells = <0>;
compatible = "wlf,wm8960";
reg = <0x1a>;
wlf,shared-lrclk;
};
};
&gdma {
status = "okay";
};
&i2s {
#sound-dai-cells = <0>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2s_pins>;
};
&spi0 {
status = "okay";
flash@0 {
compatible = "mx25l6405d","jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_5: macaddr@5 {
compatible = "mac-base";
reg = <0x5 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
&sdhci {
status = "okay";
};
&gmac0 {
nvmem-cells = <&macaddr_factory_5 0>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy4>;
nvmem-cells = <&macaddr_factory_5 1>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy4: ethernet-phy@4 {
reg = <4>;
};
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan1";
};
port@1 {
status = "okay";
label = "lan2";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan4";
};
};
};
&pcie {
status = "okay";
};