mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
20ea6adbf1
Build system: x86_64 Build-tested: bcm2708, bcm2709, bcm2710, bcm2711 Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B Signed-off-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
546 lines
13 KiB
Diff
546 lines
13 KiB
Diff
From 2cc810fd22f30acabbf5e6726e003c5da56d3212 Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Mon, 31 Jan 2022 17:25:19 +0000
|
|
Subject: [PATCH] dtoverlays: Rework vc4-kms-dpi overlays to remove
|
|
duplication
|
|
|
|
Removes all the common panel, dpi, and backlight configuration
|
|
from the individual vc4-kms-dpi-* files into vc4-kms-dpi.dtsi.
|
|
|
|
Creates a new vc4-kms-dpi-panel-overlay.dts for preconfigured
|
|
panels, with overrides to enable the different panel configurations.
|
|
|
|
Deprecates vc4-kms-dpi-at056tn53v1 as superceded by vc4-kms-dpi-panel.
|
|
vc4-kms-kippah-7inch not deprecated for now as it is likely to be
|
|
in wider use than at056tn53v1.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 2 +-
|
|
arch/arm/boot/dts/overlays/README | 33 ++++-
|
|
arch/arm/boot/dts/overlays/overlay_map.dts | 4 +
|
|
.../vc4-kms-dpi-at056tn53v1-overlay.dts | 44 ------
|
|
.../overlays/vc4-kms-dpi-generic-overlay.dts | 138 ++++--------------
|
|
.../overlays/vc4-kms-dpi-panel-overlay.dts | 62 ++++++++
|
|
arch/arm/boot/dts/overlays/vc4-kms-dpi.dtsi | 109 ++++++++++++++
|
|
.../overlays/vc4-kms-kippah-7inch-overlay.dts | 27 +---
|
|
8 files changed, 235 insertions(+), 184 deletions(-)
|
|
delete mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-at056tn53v1-overlay.dts
|
|
create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-panel-overlay.dts
|
|
create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi.dtsi
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -234,8 +234,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
upstream-pi4.dtbo \
|
|
vc4-fkms-v3d.dtbo \
|
|
vc4-fkms-v3d-pi4.dtbo \
|
|
- vc4-kms-dpi-at056tn53v1.dtbo \
|
|
vc4-kms-dpi-generic.dtbo \
|
|
+ vc4-kms-dpi-panel.dtbo \
|
|
vc4-kms-dsi-7inch.dtbo \
|
|
vc4-kms-dsi-lt070me05000.dtbo \
|
|
vc4-kms-dsi-lt070me05000-v2.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -3624,10 +3624,8 @@ Params: cma-512 CMA is 5
|
|
|
|
|
|
Name: vc4-kms-dpi-at056tn53v1
|
|
-Info: Enable an Innolux 5.6in VGA TFT connected to DPI interface under KMS.
|
|
- Requires vc4-kms-v3d to be loaded.
|
|
-Load: dtoverlay=vc4-kms-dpi-at056tn53v1
|
|
-Params: <None>
|
|
+Info: This overlay is now deprecated - see vc4-kms-dpi-panel,at056tn53v1
|
|
+Load: <Deprecated>
|
|
|
|
|
|
Name: vc4-kms-dpi-generic
|
|
@@ -3659,6 +3657,33 @@ Params: clock-frequency Display
|
|
backlight-gpio Defines a GPIO to be used for backlight control
|
|
(default of none).
|
|
backlight-pwm Defines a PWM channel to be used for backlight
|
|
+ control (default of none). NB Disables audio
|
|
+ headphone output as that also uses PWM.
|
|
+ backlight-pwm-chan Choose channel on &pwm node for backlight
|
|
+ control.
|
|
+ (default 0).
|
|
+ backlight-pwm-gpio GPIO pin to be used for the PWM backlight. See
|
|
+ pwm-2chan for valid options.
|
|
+ (default 18 - note this can only work with
|
|
+ rgb666-padhi).
|
|
+ backlight-pwm-func Pin function of GPIO used for the PWM
|
|
+ backlight.
|
|
+ See pwm-2chan for valid options.
|
|
+ (default 2).
|
|
+ backlight-def-brightness
|
|
+ Set the default brightness. Normal range 1-16.
|
|
+ (default 16).
|
|
+
|
|
+
|
|
+Name: vc4-kms-dpi-panel
|
|
+Info: Enable a preconfigured KMS DPI panel.
|
|
+ Requires vc4-kms-v3d to be loaded.
|
|
+Load: dtoverlay=vc4-kms-dpi-panel,<param>=<val>
|
|
+Params: at056tn53v1 Enable an Innolux 5.6in VGA TFT
|
|
+ kippah-7inch Enable an Adafruit Kippah with 7inch panel.
|
|
+ backlight-gpio Defines a GPIO to be used for backlight control
|
|
+ (default of none).
|
|
+ backlight-pwm Defines a PWM channel to be used for backlight
|
|
control (default of none). NB Disables audio
|
|
headphone output as that also uses PWM.
|
|
backlight-pwm-chan Choose channel on &pwm node for backlight
|
|
--- a/arch/arm/boot/dts/overlays/overlay_map.dts
|
|
+++ b/arch/arm/boot/dts/overlays/overlay_map.dts
|
|
@@ -151,6 +151,10 @@
|
|
bcm2711;
|
|
};
|
|
|
|
+ vc4-kms-dpi-at056tn53v1 {
|
|
+ deprecated = "use vc4-kms-dpi-panel,at056tn53v1";
|
|
+ };
|
|
+
|
|
vc4-kms-v3d {
|
|
bcm2835;
|
|
bcm2711 = "vc4-kms-v3d-pi4";
|
|
--- a/arch/arm/boot/dts/overlays/vc4-kms-dpi-at056tn53v1-overlay.dts
|
|
+++ /dev/null
|
|
@@ -1,44 +0,0 @@
|
|
-/*
|
|
- * vc4-kms-dpi-at056tn53v1-overlay.dts
|
|
- */
|
|
-
|
|
-/dts-v1/;
|
|
-/plugin/;
|
|
-
|
|
-#include <dt-bindings/gpio/gpio.h>
|
|
-#include <dt-bindings/pinctrl/bcm2835.h>
|
|
-
|
|
-/ {
|
|
- compatible = "brcm,bcm2835";
|
|
-
|
|
- fragment@0 {
|
|
- target-path = "/";
|
|
- __overlay__ {
|
|
- panel: panel {
|
|
- compatible = "innolux,at056tn53v1", "simple-panel";
|
|
-
|
|
- port {
|
|
- panel_in: endpoint {
|
|
- remote-endpoint = <&dpi_out>;
|
|
- };
|
|
- };
|
|
- };
|
|
- };
|
|
- };
|
|
-
|
|
- fragment@1 {
|
|
- target = <&dpi>;
|
|
- __overlay__ {
|
|
- status = "okay";
|
|
-
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&dpi_18bit_cpadhi_gpio0>;
|
|
-
|
|
- port {
|
|
- dpi_out: endpoint {
|
|
- remote-endpoint = <&panel_in>;
|
|
- };
|
|
- };
|
|
- };
|
|
- };
|
|
-};
|
|
--- a/arch/arm/boot/dts/overlays/vc4-kms-dpi-generic-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/vc4-kms-dpi-generic-overlay.dts
|
|
@@ -5,124 +5,43 @@
|
|
/dts-v1/;
|
|
/plugin/;
|
|
|
|
-#include <dt-bindings/gpio/gpio.h>
|
|
-#include <dt-bindings/pinctrl/bcm2835.h>
|
|
+#include "vc4-kms-dpi.dtsi"
|
|
|
|
/ {
|
|
compatible = "brcm,bcm2835";
|
|
|
|
fragment@0 {
|
|
- target-path = "/";
|
|
- __overlay__ {
|
|
- panel: panel {
|
|
- compatible = "panel-dpi";
|
|
-
|
|
- width-mm = <154>;
|
|
- height-mm = <83>;
|
|
- bus-format = <0x1009>;
|
|
-
|
|
- timing: panel-timing {
|
|
- clock-frequency = <29500000>;
|
|
- hactive = <800>;
|
|
- hfront-porch = <24>;
|
|
- hsync-len = <72>;
|
|
- hback-porch = <96>;
|
|
- hsync-active = <1>;
|
|
- vactive = <480>;
|
|
- vfront-porch = <3>;
|
|
- vsync-len = <10>;
|
|
- vback-porch = <7>;
|
|
- vsync-active = <1>;
|
|
-
|
|
- de-active = <1>;
|
|
- pixelclk-active = <1>;
|
|
- };
|
|
-
|
|
- port {
|
|
- panel_in: endpoint {
|
|
- remote-endpoint = <&dpi_out>;
|
|
- };
|
|
- };
|
|
- };
|
|
- };
|
|
- };
|
|
-
|
|
- fragment@1 {
|
|
- target = <&dpi>;
|
|
- dpi_node: __overlay__ {
|
|
- status = "okay";
|
|
-
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&dpi_18bit_gpio0>;
|
|
-
|
|
- port {
|
|
- dpi_out: endpoint {
|
|
- remote-endpoint = <&panel_in>;
|
|
- };
|
|
- };
|
|
- };
|
|
- };
|
|
-
|
|
- fragment@2 {
|
|
- target = <&panel>;
|
|
- __dormant__ {
|
|
- backlight = <&backlight>;
|
|
- };
|
|
- };
|
|
-
|
|
- fragment@3 {
|
|
- target-path = "/";
|
|
- __dormant__ {
|
|
- backlight: backlight {
|
|
- compatible = "gpio-backlight";
|
|
- gpios = <&gpio 255 GPIO_ACTIVE_HIGH>;
|
|
- };
|
|
- };
|
|
- };
|
|
-
|
|
- fragment@4 {
|
|
target = <&panel>;
|
|
- __dormant__ {
|
|
- backlight = <&backlight_pwm>;
|
|
- };
|
|
- };
|
|
-
|
|
- fragment@5 {
|
|
- target-path = "/";
|
|
- __dormant__ {
|
|
- backlight_pwm: backlight_pwm {
|
|
- compatible = "pwm-backlight";
|
|
- brightness-levels = <0 6 8 12 16 24 32 40 48 64 96 128 160 192 224 255>;
|
|
- default-brightness-level = <16>;
|
|
- pwms = <&pwm 0 200000>;
|
|
- };
|
|
- };
|
|
- };
|
|
+ __overlay__ {
|
|
+ compatible = "panel-dpi";
|
|
|
|
- fragment@6 {
|
|
- target = <&pwm>;
|
|
- __dormant__ {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&pwm_pins>;
|
|
- assigned-clock-rates = <1000000>;
|
|
- status = "okay";
|
|
- };
|
|
- };
|
|
+ width-mm = <154>;
|
|
+ height-mm = <83>;
|
|
+ bus-format = <0x1009>;
|
|
+
|
|
+ timing: panel-timing {
|
|
+ clock-frequency = <29500000>;
|
|
+ hactive = <800>;
|
|
+ hfront-porch = <24>;
|
|
+ hsync-len = <72>;
|
|
+ hback-porch = <96>;
|
|
+ hsync-active = <1>;
|
|
+ vactive = <480>;
|
|
+ vfront-porch = <3>;
|
|
+ vsync-len = <10>;
|
|
+ vback-porch = <7>;
|
|
+ vsync-active = <1>;
|
|
|
|
- fragment@7 {
|
|
- target = <&gpio>;
|
|
- __dormant__ {
|
|
- pwm_pins: pwm_pins {
|
|
- brcm,pins = <18>;
|
|
- brcm,function = <2>; /* Alt5 */
|
|
+ de-active = <1>;
|
|
+ pixelclk-active = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
- fragment@8 {
|
|
- target = <&audio>;
|
|
- __dormant__ {
|
|
- brcm,disable-headphones;
|
|
+ fragment@1 {
|
|
+ target = <&dpi>;
|
|
+ __overlay__ {
|
|
+ pinctrl-0 = <&dpi_18bit_gpio0>;
|
|
};
|
|
};
|
|
|
|
@@ -151,12 +70,5 @@
|
|
rgb888 = <&panel>, "bus-format:0=0x100a",
|
|
<&dpi_node>, "pinctrl-0:0=",<&dpi_gpio0>;
|
|
bus-format = <&panel>, "bus-format:0";
|
|
- backlight-gpio = <0>, "+2+3",
|
|
- <&backlight>, "gpios:4";
|
|
- backlight-pwm = <0>, "+4+5+6+7+8";
|
|
- backlight-pwm-chan = <&backlight_pwm>, "pwms:4";
|
|
- backlight-pwm-gpio = <&pwm_pins>, "brcm,pins:0";
|
|
- backlight-pwm-func = <&pwm_pins>, "brcm,function:0";
|
|
- backlight-def-brightness = <&backlight_pwm>, "default-brightness-level:0";
|
|
};
|
|
};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/vc4-kms-dpi-panel-overlay.dts
|
|
@@ -0,0 +1,62 @@
|
|
+/*
|
|
+ * vc4-kms-dpi-panel-overlay.dts
|
|
+ * Support for any predefined DPI panel.
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+#include "vc4-kms-dpi.dtsi"
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2835";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&panel>;
|
|
+ __dormant__ {
|
|
+ compatible = "innolux,at056tn53v1", "simple-panel";
|
|
+ };
|
|
+ };
|
|
+ fragment@1 {
|
|
+ target = <&panel>;
|
|
+ __dormant__ {
|
|
+ compatible = "ontat,yx700wv03", "simple-panel";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@90 {
|
|
+ target = <&dpi>;
|
|
+ __dormant__ {
|
|
+ pinctrl-0 = <&dpi_18bit_cpadhi_gpio0>;
|
|
+ };
|
|
+ };
|
|
+ fragment@91 {
|
|
+ target = <&dpi>;
|
|
+ __dormant__ {
|
|
+ pinctrl-0 = <&dpi_18bit_gpio0>;
|
|
+ };
|
|
+ };
|
|
+ fragment@92 {
|
|
+ target = <&dpi>;
|
|
+ __dormant__ {
|
|
+ pinctrl-0 = <&dpi_gpio0>;
|
|
+ };
|
|
+ };
|
|
+ fragment@93 {
|
|
+ target = <&dpi>;
|
|
+ __dormant__ {
|
|
+ pinctrl-0 = <&dpi_16bit_cpadhi_gpio0>;
|
|
+ };
|
|
+ };
|
|
+ fragment@94 {
|
|
+ target = <&dpi>;
|
|
+ __dormant__ {
|
|
+ pinctrl-0 = <&dpi_16bit_gpio0>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ at056tn53v1 = <0>, "+0+90";
|
|
+ kippah-7inch = <0>, "+1+91";
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/vc4-kms-dpi.dtsi
|
|
@@ -0,0 +1,109 @@
|
|
+/*
|
|
+ * vc4-kms-dpi.dtsi
|
|
+ */
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/pinctrl/bcm2835.h>
|
|
+
|
|
+/ {
|
|
+ fragment@100 {
|
|
+ target-path = "/";
|
|
+ __overlay__ {
|
|
+ panel: panel {
|
|
+ port {
|
|
+ panel_in: endpoint {
|
|
+ remote-endpoint = <&dpi_out>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@101 {
|
|
+ target = <&dpi>;
|
|
+ dpi_node: __overlay__ {
|
|
+ status = "okay";
|
|
+
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ port {
|
|
+ dpi_out: endpoint {
|
|
+ remote-endpoint = <&panel_in>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@102 {
|
|
+ target = <&panel>;
|
|
+ __dormant__ {
|
|
+ backlight = <&backlight>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@103 {
|
|
+ target-path = "/";
|
|
+ __dormant__ {
|
|
+ backlight: backlight {
|
|
+ compatible = "gpio-backlight";
|
|
+ gpios = <&gpio 255 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@104 {
|
|
+ target = <&panel>;
|
|
+ __dormant__ {
|
|
+ backlight = <&backlight_pwm>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@105 {
|
|
+ target-path = "/";
|
|
+ __dormant__ {
|
|
+ backlight_pwm: backlight_pwm {
|
|
+ compatible = "pwm-backlight";
|
|
+ brightness-levels = <0 6 8 12 16 24 32 40 48 64 96 128 160 192 224 255>;
|
|
+ default-brightness-level = <16>;
|
|
+ pwms = <&pwm 0 200000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@106 {
|
|
+ target = <&pwm>;
|
|
+ __dormant__ {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pwm_pins>;
|
|
+ assigned-clock-rates = <1000000>;
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@107 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ pwm_pins: pwm_pins {
|
|
+ brcm,pins = <18>;
|
|
+ brcm,function = <2>; /* Alt5 */
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@108 {
|
|
+ target = <&audio>;
|
|
+ __dormant__ {
|
|
+ brcm,disable-headphones;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ backlight-gpio = <0>, "+102+103",
|
|
+ <&backlight>, "gpios:4";
|
|
+ backlight-pwm = <0>, "+104+105+106+107+108";
|
|
+ backlight-pwm-chan = <&backlight_pwm>, "pwms:4";
|
|
+ backlight-pwm-gpio = <&pwm_pins>, "brcm,pins:0";
|
|
+ backlight-pwm-func = <&pwm_pins>, "brcm,function:0";
|
|
+ backlight-def-brightness = <&backlight_pwm>, "default-brightness-level:0";
|
|
+ };
|
|
+};
|
|
--- a/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts
|
|
@@ -1,43 +1,26 @@
|
|
/*
|
|
- * vc4-kms-v3d-overlay.dts
|
|
+ * vc4-kms-kippah-7inch-overlay.dts
|
|
*/
|
|
|
|
/dts-v1/;
|
|
/plugin/;
|
|
|
|
-#include <dt-bindings/pinctrl/bcm2835.h>
|
|
+#include "vc4-kms-dpi.dtsi"
|
|
|
|
/ {
|
|
compatible = "brcm,bcm2835";
|
|
|
|
fragment@0 {
|
|
- target-path = "/";
|
|
- __overlay__ {
|
|
- panel: panel {
|
|
- compatible = "ontat,yx700wv03", "simple-panel";
|
|
-
|
|
- port {
|
|
- panel_in: endpoint {
|
|
- remote-endpoint = <&dpi_out>;
|
|
- };
|
|
- };
|
|
- };
|
|
+ target = <&panel>;
|
|
+ __overlay__ {
|
|
+ compatible = "ontat,yx700wv03", "simple-panel";
|
|
};
|
|
};
|
|
|
|
fragment@1 {
|
|
target = <&dpi>;
|
|
__overlay__ {
|
|
- status = "okay";
|
|
-
|
|
- pinctrl-names = "default";
|
|
pinctrl-0 = <&dpi_18bit_gpio0>;
|
|
-
|
|
- port {
|
|
- dpi_out: endpoint@0 {
|
|
- remote-endpoint = <&panel_in>;
|
|
- };
|
|
- };
|
|
};
|
|
};
|
|
};
|