openwrt/target/linux/ramips/dts/mt7621_iodata_wn-dx1200gr.dts
Ansuel Smith 06bb4a5018 ramips: convert mtd-mac-address to nvmem implementation
Define nvmem-cells and convert mtd-mac-address to nvmem implementation.
The conversion is done with an automated script.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-07-19 14:51:22 +02:00

213 lines
3.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "iodata,wn-dx1200gr", "mediatek,mt7621-soc";
model = "I-O DATA WN-DX1200GR";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &wan;
};
leds {
compatible = "gpio-leds";
wps {
label = "blue:wps";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
led_power: power {
label = "green:power";
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
repeater {
label = "repeater";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
wps {
label = "wps";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x100000 0x100000>;
read-only;
};
factory: partition@200000 {
label = "factory";
reg = <0x200000 0x200000>;
};
partition@400000 {
label = "kernel";
reg = <0x400000 0x400000>;
};
partition@800000 {
label = "ubi";
reg = <0x800000 0x2e00000>;
};
partition@3600000 {
label = "Config";
reg = <0x3600000 0x100000>;
read-only;
};
partition@3700000 {
label = "firmware_2";
reg = <0x3700000 0x3200000>;
};
partition@6900000 {
label = "Config_2";
reg = <0x6900000 0x100000>;
read-only;
};
partition@6a00000 {
label = "persist";
reg = <0x6a00000 0x100000>;
};
partition@6b00000 {
label = "idmkey";
reg = <0x6b00000 0x100000>;
read-only;
};
partition@6c00000 {
label = "Backup";
reg = <0x6c00000 0x1380000>;
read-only;
};
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_1e000>;
nvmem-cell-names = "mac-address";
};
&switch0 {
ports {
wan: port@0 {
status = "okay";
label = "wan";
nvmem-cells = <&macaddr_factory_1e006>;
nvmem-cell-names = "mac-address";
};
port@1 {
status = "okay";
label = "lan4";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan2";
};
port@4 {
status = "okay";
label = "lan1";
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&state_default {
gpio {
groups = "uart2", "uart3", "wdt";
function = "gpio";
};
};
&xhci {
status = "disabled";
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_1e000: macaddr@1e000 {
reg = <0x1e000 0x6>;
};
macaddr_factory_1e006: macaddr@1e006 {
reg = <0x1e006 0x6>;
};
};