David Bauer 2e6c236abd ipq40xx: essedma: enable VLAN tag offload for single-port ... Enable the VLAN tag offloading mechanism for RGMII single-port devices. This allows those devices to use 802.1Q VLANs on the ethernet port. Previously, RX frames were double tagged, as the RX TAG removal flag was not enabled and an additional 802.1Q header was inserted elsewhere in the code. On the TX side, tagging was completely not present for single-port devices. Enable tagging if an 802.1Q frame should be transmitted and disable the default tagging mechanism for single-port devices. Tested on Aruba AP-303 Signed-off-by: David Bauer <mail@david-bauer.net>		2020-09-11 17:37:11 +02:00
..
base-files	ipq40xx: add support for Buffalo WTR-M2133HP	2020-07-08 16:07:05 +02:00
files/arch/arm/boot/dts	ipq40xx: support reset button for WPJ419	2020-07-23 12:56:58 +02:00
files-5.4/drivers/net/ethernet/qualcomm/essedma	ipq40xx: essedma: enable VLAN tag offload for single-port	2020-09-11 17:37:11 +02:00
generic	ipqx0xx: add Generic subtarget	2019-08-22 21:15:28 +02:00
image	ipq40xx: add support for Buffalo WTR-M2133HP	2020-07-08 16:07:05 +02:00
patches-4.19	ipq40xx: fix patches on dts Makefile	2020-07-08 17:50:12 +02:00
patches-5.4	kernel: bump 5.4 to 5.4.61	2020-08-30 19:44:47 +02:00
profiles	ipq40xx: add target	2018-03-14 19:04:50 +01:00
config-4.19	kernel: unify CONFIG_GPIO_SYSFS in kernel configs	2020-08-06 12:37:04 +02:00
config-5.4	ipq40xx: refresh kernel 5.4 config	2020-08-06 12:51:51 +02:00
Makefile	treewide: use wpad-basic-wolfssl as default	2020-08-20 14:19:39 +02:00