openwrt/package
Claudiu Beznea 60f52f9b0d at91: add support for sama5d27-wlsom1-ek board
Add support for SAMA5D27 WLSOM1-EK board.

Hardware:
- SIP: SAMA5D27C-LD2G-CU including SAMA5D27 MPU and 2Gbit LPDDR2-SDRAM
- MMC: one standard SD card interface
- Flash: 64 Mb serial quad I/O flash memory (SST26VF064BEUIT-104I/MF)
	 with embedded EUI-48 and EUI-64 MAC addresses
- USB: one USB device, one USB host one HSIC interface
- Ethernet: 1x10/100Mbps port
- WiFi/BT: IEEE 802.11 b/g/n Wi-Fi plus Bluetooth (Wi-Fi/BT) module
	   (ATWILC3000-MR110UA)
- Crypto: one ATECC608B-TNGTLS secure element
- Video: one LCD RGB 18-bit interface, one ISC 12-bit camera interface
- Debug port: one JTAG interface, one UART interface, one WILC UART
              interface
- Leds: one RGB LED
- Buttons: start, reset, wakeup, user buttons
- Expansion: one tamper connector, one mikrobus interface, 2 XPRO PTC
             connector
- Power managament: PMIC (MCP16502)

Flashing:
- follow procedure at [1]

[1] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d27WLSom1EKMainPage#Create_a_SD_card_with_the_demo

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-10-24 18:52:21 +02:00
..
base-files base-files: chmod 1777 /var/lock 2021-10-23 19:30:54 +02:00
boot at91: add support for sama5d27-wlsom1-ek board 2021-10-24 18:52:21 +02:00
devel gdb: update to 10.2 2021-08-21 15:59:39 +02:00
firmware wireless-regdb: update to version 2021.08.28 2021-10-23 19:31:32 +02:00
kernel mac80211: Add devm_platform_get_and_ioremap_resource() 2021-10-24 15:03:20 +02:00
libs wolfssl: enable ECC Curve 25519 by default 2021-10-24 18:46:24 +02:00
network mac80211: Update to version 5.14.13-1 2021-10-24 00:08:38 +02:00
system uci: update to git HEAD 2021-10-22 23:51:51 +02:00
utils busybox: update to 1.34.1 2021-10-05 20:59:32 +02:00
Makefile build: fix opkg install step for large package selection 2021-05-12 11:13:53 +02:00