ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 15:32:33 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
60f41c6c9e
openwrt/target/linux/ramips/image/mt76x8.mk
Chuanhong Guo 0ab9f283f7 ramips: add support for TOTOLINK LR1200 
Specifications:
- SoC: MT7628DAN (MT7628AN with 64MB built-in RAM)
- Flash: 8M SPI NOR
- Ethernet: 5x 10/100Mbps
- WiFi: 2.4G: MT7628 built-in
        5G: MT7612E
- 1x miniPCIe slot for LTE modem (only USB pins connected)
- 1x SIM slot

Flash instruction:
U-boot has a builtin web recovery page:
1. Hold the reset button while powering it up
2. Connect to the ethernet and set an IP in 192.168.1.0/24 range
3. Open your browser and upload firmware through http://192.168.1.1

Note about the LTE modem:
If your router comes with an EC25 module and it doesn't show up
as a QMI device, you should do the following to switch it to QMI
mode:
1. Install kmod-usb-serial-option and a terminal software
   (e.g. minicom or screen). All 4 serial ports of the modem
   should be available now.
2. Open /dev/ttyUSB3 with the terminal software and type this
   AT command: AT+QCFG="usbnet",0
3. Power-cycle the router. You should now get a QMI device
   recognized.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-06-05 10:26:33 +02:00

487 lines
13 KiB
Makefile
Raw Blame History

#
# MT76x8 Profiles
#
define Device/tplink
TPLINK_FLASHLAYOUT :=
TPLINK_HWID :=
TPLINK_HWREV :=
TPLINK_HWREVADD :=
TPLINK_HVERSION :=
KERNEL := $(KERNEL_DTB)
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v2-header -e
IMAGES += tftp-recovery.bin
IMAGE/factory.bin := tplink-v2-image -e
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata | \
check-size $$$$(IMAGE_SIZE)
endef
DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION
define Device/alfa-network_awusfree1
DTS := AWUSFREE1
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_TITLE := ALFA Network AWUSFREE1
DEVICE_PACKAGES := uboot-envtools
endef
TARGET_DEVICES += alfa-network_awusfree1
define Device/cudy_wr1000
DTS := WR1000
IMAGE_SIZE := $(ralink_default_fw_size_8M)
IMAGES += factory.bin
IMAGE/factory.bin := \
$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | jcg-header 92.122
JCG_MAXSIZE := 8060928
DEVICE_TITLE := Cudy WR1000
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += wr1000
endef
TARGET_DEVICES += cudy_wr1000
define Device/tama_w06
DTS := W06
IMAGE_SIZE := 15040k
DEVICE_TITLE := Tama W06
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += tama_w06
define Device/duzun-dm06
DTS := DUZUN-DM06
DEVICE_TITLE := DuZun DM06
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += duzun-dm06
define Device/gl-mt300n-v2
DTS := GL-MT300N-V2
IMAGE_SIZE := 16064k
DEVICE_TITLE := GL-iNet GL-MT300N-V2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += gl-mt300n-v2
define Device/glinet_vixmini
DTS := VIXMINI
IMAGE_SIZE := 7872k
DEVICE_TITLE := GL.iNet VIXMINI
SUPPORTED_DEVICES += vixmini
endef
TARGET_DEVICES += glinet_vixmini
define Device/hc5661a
DTS := HC5661A
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := HiWiFi HC5661A
endef
TARGET_DEVICES += hc5661a
define Device/hilink_hlk-7628n
DTS := HLK-7628N
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_TITLE := HILINK HLK7628N
endef
TARGET_DEVICES += hilink_hlk-7628n
define Device/hiwifi_hc5861b
DTS := HC5861B
IMAGE_SIZE := 15808k
DEVICE_TITLE := HiWiFi HC5861B
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += hiwifi_hc5861b
define Device/LinkIt7688
DTS := LINKIT7688
IMAGE_SIZE := $(ralink_default_fw_size_32M)
SUPPORTED_DEVICES := linkits7688 linkits7688d
DEVICE_TITLE := MediaTek LinkIt Smart 7688
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools
endef
TARGET_DEVICES += LinkIt7688
define Device/mac1200r-v2
DTS := MAC1200RV2
DEVICE_TITLE := Mercury MAC1200R v2.0
SUPPORTED_DEVICES := mac1200rv2
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += mac1200r-v2
define Device/miwifi-nano
DTS := MIWIFI-NANO
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Xiaomi MiWiFi Nano
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += miwifi-nano
define Device/mt7628
DTS := MT7628
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_TITLE := MediaTek MT7628 EVB
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += mt7628
define Device/netgear_r6120
DTS := R6120
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Netgear R6120
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
SERCOMM_HWID := CGQ
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0040
IMAGES += factory.img
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE)| append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img := pad-extra 576k | $$(IMAGE/default) | pad-to $$$$(BLOCKSIZE) | \
sercom-footer | pad-to 128 | zip R6120.bin | sercom-seal
endef
TARGET_DEVICES += netgear_r6120
define Device/omega2
DTS := OMEGA2
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Onion Omega2
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools
endef
TARGET_DEVICES += omega2
define Device/omega2p
DTS := OMEGA2P
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_TITLE := Onion Omega2+
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools kmod-sdhci-mt7620
endef
TARGET_DEVICES += omega2p
define Device/pbr-d1
DTS := PBR-D1
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := PBR-D1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += pbr-d1
define Device/rakwireless_rak633
DTS := RAK633
DEVICE_TITLE := Rakwireless RAK633
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += rakwireless_rak633
define Device/skylab_skw92a
DTS := SKW92A
IMAGE_SIZE := 16064k
DEVICE_TITLE := Skylab SKW92A
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += skylab_skw92a
define Device/totolink_lr1200
DTS := TOTOLINK-LR1200
IMAGE_SIZE := 7872k
DEVICE_TITLE := TOTOLINK LR1200
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 uqmi
endef
TARGET_DEVICES += totolink_lr1200
define Device/tplink_tl-wa801nd-v5
$(Device/tplink)
DTS := TL-WA801NDV5
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link TL-WA801ND v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08010005
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
endef
TARGET_DEVICES += tplink_tl-wa801nd-v5
define Device/tplink_tl-wr802n-v4
$(Device/tplink)
DTS := TL-WR802NV4
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link TL-WR802N v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08020004
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x4
TPLINK_HVERSION := 3
endef
TARGET_DEVICES += tplink_tl-wr802n-v4
define Device/tl-wr840n-v4
$(Device/tplink)
DTS := TL-WR840NV4
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link TL-WR840N v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08400004
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x4
TPLINK_HVERSION := 3
endef
TARGET_DEVICES += tl-wr840n-v4
define Device/tl-wr840n-v5
DTS := TL-WR840NV5
IMAGE_SIZE := 3904k
DEVICE_TITLE := TP-Link TL-WR840N v5
TPLINK_FLASHLAYOUT := 4Mmtk
TPLINK_HWID := 0x08400005
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
KERNEL := $(KERNEL_DTB)
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v2-header -e
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata | \
check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += tl-wr840n-v5
define Device/tl-wr841n-v13
$(Device/tplink)
DTS := TL-WR841NV13
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link TL-WR841N v13
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08410013
TPLINK_HWREV := 0x268
TPLINK_HWREVADD := 0x13
TPLINK_HVERSION := 3
endef
TARGET_DEVICES += tl-wr841n-v13
define Device/tplink_c20-v4
$(Device/tplink)
DTS := ArcherC20v4
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link ArcherC20 v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc200004
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x4
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x0e
endef
TARGET_DEVICES += tplink_c20-v4
define Device/tplink_c50-v3
$(Device/tplink)
DTS := ArcherC50V3
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link ArcherC50 v3
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x001D9BA4
TPLINK_HWREV := 0x79
TPLINK_HWREVADD := 0x1
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += tplink_c50-v3
define Device/tplink_c50-v4
$(Device/tplink)
DTS := ArcherC50V4
IMAGE_SIZE := 7616k
DEVICE_TITLE := TP-Link ArcherC50 v4
TPLINK_FLASHLAYOUT := 8MSUmtk
TPLINK_HWID := 0x001D589B
TPLINK_HWREV := 0x93
TPLINK_HWREVADD := 0x2
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x2
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += tplink_c50-v4
define Device/tplink_tl-mr3020-v3
$(Device/tplink)
DTS := TL-MR3020V3
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link TL-MR3020 v3
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x30200003
TPLINK_HWREV := 0x3
TPLINK_HWREVADD := 0x3
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-mr3020-v3
define Device/tplink_tl-mr3420-v5
$(Device/tplink)
DTS := TL-MR3420V5
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link TL-MR3420 v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x34200005
TPLINK_HWREV := 0x5
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-mr3420-v5
define Device/tplink_tl-wr842n-v5
$(Device/tplink)
DTS := TL-WR842NV5
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link TL-WR842N v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08420005
TPLINK_HWREV := 0x5
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-wr842n-v5
define Device/tplink_tl-wr902ac-v3
$(Device/tplink)
DTS := TL-WR902ACV3
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link TL-WR902AC v3
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x000dc88f
TPLINK_HWREV := 0x89
TPLINK_HWREVADD := 0x1
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-wr902ac-v3
define Device/u7628-01-128M-16M
DTS := U7628-01-128M-16M
IMAGE_SIZE := 16064k
DEVICE_TITLE := UniElec U7628-01 (128M RAM/16M flash)
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += u7628-01-128M-16M
define Device/vocore2
DTS := VOCORE2
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := VoCore VoCore2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-sdhci-mt7620
endef
TARGET_DEVICES += vocore2
define Device/vocore2lite
DTS := VOCORE2LITE
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := VoCore VoCore2-Lite
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-sdhci-mt7620
endef
TARGET_DEVICES += vocore2lite
define Device/wavlink_wl-wn570ha1
DTS := WL-WN570HA1
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_TITLE := Wavlink WL-WN570HA1
DEVICE_PACKAGES := kmod-mt76x0e
endef
TARGET_DEVICES += wavlink_wl-wn570ha1
define Device/wavlink_wl-wn575a3
DTS := WL-WN575A3
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_TITLE := Wavlink WL-WN575A3
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += wl-wn575a3
endef
TARGET_DEVICES += wavlink_wl-wn575a3
define Device/wcr-1166ds
DTS := WCR-1166DS
BUFFALO_TAG_PLATFORM := MTK
BUFFALO_TAG_VERSION := 9.99
BUFFALO_TAG_MINOR := 9.99
IMAGES += factory.bin
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
IMAGE/factory.bin := \
trx -M 0x746f435c | pad-rootfs | append-metadata | \
buffalo-enc WCR-1166DS $$(BUFFALO_TAG_VERSION) -l | \
buffalo-tag-dhp WCR-1166DS JP JP | buffalo-enc-tag -l | \
buffalo-dhp-image
DEVICE_TITLE := Buffalo WCR-1166DS
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += wcr-1166ds
define Device/widora_neo-16m
DTS := WIDORA-NEO-16M
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Widora-NEO (16M)
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += widora-neo
endef
TARGET_DEVICES += widora_neo-16m
define Device/widora_neo-32m
DTS := WIDORA-NEO-32M
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_TITLE := Widora-NEO (32M)
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += widora_neo-32m
define Device/wiznet_wizfi630s
DTS := WIZFI630S
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_TITLE := WIZnet WizFi630S
endef
TARGET_DEVICES += wiznet_wizfi630s
define Device/wrtnode2p
DTS := WRTNODE2P
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := WRTnode 2P
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += wrtnode2p
define Device/wrtnode2r
DTS := WRTNODE2R
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := WRTnode 2R
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += wrtnode2r
define Device/xiaomi_mir4a-100m
DTS := XIAOMI-MIR4A-100M
IMAGE_SIZE := 14976k
DEVICE_TITLE := Xiaomi Mi Router 4A (100M Edition)
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += xiaomi_mir4a-100m
define Device/zbtlink_zbt-we1226
DTS := ZBT-WE1226
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_TITLE := ZBTlink ZBT-WE1226
endef
TARGET_DEVICES += zbtlink_zbt-we1226
define Device/zyxel_keenetic-extra-ii
DTS := ki_rb
IMAGE_SIZE := 14912k
BLOCKSIZE := 64k
DEVICE_TITLE := ZyXEL Keenetic Extra II
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
check-size $$$$(IMAGE_SIZE) | zyimage -d 6162 -v "ZyXEL Keenetic Extra II"
endef
TARGET_DEVICES += zyxel_keenetic-extra-ii
Reference in New Issue View Git Blame Copy Permalink