Petr Štetiar 606eb43b72 ipq40xx: glinet-b1300: fix LAN and WAN MAC address assigments ... When testing the DSA changes with 5.15.60 kernel, I've noticed, that the MAC addresses are not properly configured, there is single MAC being used for LAN and WAN interfaces: eth0: 94:83:c4:XX:YY:4a (MAC on sticker) lan1@eth0: 94:83:c4:XX:YY:4a lan2@eth0: 94:83:c4:XX:YY:4a wan@eth0: 94:83:c4:XX:YY:4a wlan0: 94:83:c4:XX:YY:4a wlan1: 94:83:c4:XX:YY:4b The same config, prior to the DSA conversion: lan/eth0: 94:83:c4:XX:YY:4a (MAC on sticker) wan/eth1: 94:83:c4:XX:YY:4b wlan0: 94:83:c4:XX:YY:4a wlan1: 94:83:c4:XX:YY:4b Settings in ART partition: root@OpenWrt:/# hexdump -C /dev/mtd7 | grep '94 83' 00000000 94 83 c4 XX YY 4a 94 83 c4 0e YY 4b ff ff ff ff |.....J.....K....| 00001000 20 2f 8d 8c 01 01 94 83 c4 XX YY 4a 00 00 20 00 | /.........J.. .| 00005000 20 2f 5a 3a 01 01 94 83 c4 XX YY 4b 00 00 20 00 | /Z:.......K.. .| So let's fix it by keeping same MAC address assigment as was done before DSA conversion and while at it, define `label-mac-device` as well. Signed-off-by: Petr Štetiar <ynezz@true.cz>		2022-10-03 08:06:43 +02:00
..
arm/boot/dts	ipq40xx: glinet-b1300: fix LAN and WAN MAC address assigments	2022-10-03 08:06:43 +02:00