ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-29 18:19:02 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
5fd86d66c1
openwrt/package/firmware/ipq-wifi/Makefile
Vladyslav Andreichykov 9c55866fad qualcommax: ipq60xx: add Linksys MR7350 support 
Linksys MR7350 is a 802.11ax Dual-band router/AP.
Specifications:
* CPU: Qualcomm IPQ6000 Quad core Cortex-A53(A73) 1.5GHz
* RAM: 512MB of DDR3
* Storage: 256Mb NAND
* Ethernet: 5x1G RJ45 ports (QCA8075)
* WLAN:
	* 2.4GHz: Qualcomm QCN5022 2x2 802.11b/g/n/ax 574 Mbps PHY rate
	* 5GHz: Qualcomm QCN5052 2x2@80MHz or  802.11a/b/g/n/ac/ax 1201 Mbps PHY rate
* LED-s:
	* RGB system led
	* USB blue led

* Buttons: 1x Soft reset 1x WPS
* Power: 12V DC Jack

Installation instructions:
Open Linksys Web UI - http://192.168.1.1/ca or http://10.65.1.1/ca depending on your setup.
Login with your admin password. The default password can be found on a sticker under the device.
To enter into the support mode, click on the “CA” link and the bottom of the page.
Open the “Connectivity” menu and upload the squash-factory image with the “Choose file” button.
Click start. Ignore all the prompts and warnings by click “yes” in all the popups.
The Wifi radios are turned off by default. To configure the router, you will need to connect your computer to the LAN port of the device.
Then you would need to write openwrt to the other partition for it to work
- First Check booted partition:
fw_printenv -n boot_part

- Change the partition:
fw_setenv boot_part 1
or
fw_setenv boot_part 2
depending on the current partition

- Then install Openwrt to the other partition if booted in slot 1:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq60xx-linksys_mr7350-squashfs-factory.bin alt_kernel

- If in slot 2:
mtd -r -e kernel -n write openwrt-qualcommax-ipq60xx-linksys_mr7350-squashfs-factory.bin kernel

Co-Authored-by: Chukun Pan <amadeus@jmu.edu.cn>
Co-Authored-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Vladyslav Andreichykov <vladdrako007@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14807
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-12-07 16:00:58 +01:00

201 lines
7.7 KiB
Makefile
Raw Blame History

include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/version.mk
PKG_NAME:=ipq-wifi
PKG_RELEASE:=1
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
PKG_SOURCE_DATE:=2024-11-28
PKG_SOURCE_VERSION:=e1f6c9ac9e1508852f292a2b8167823e180db4e8
PKG_MIRROR_HASH:=cc7ef25d43bbea4d521e0cb69887b975295be98ddf83b29f52c3c0e7d1ceeb25
PKG_FLAGS:=nonshared
include $(INCLUDE_DIR)/package.mk
define Build/Compile
endef
# Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
# to generate the board-* files here.
#
# This is intended to be used on an interim basis until device-specific
# board data for new devices is available through the upstream compilation
#
# Please send a mail with your device-specific board files upstream.
# You can find instructions and examples on the linux-wireless wiki:
# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
ALLWIFIBOARDS:= \
8devices_mango \
arcadyan_aw1000 \
asus_rt-ax89x \
buffalo_wxr-5950ax12 \
cambiumnetworks_xe34 \
cmcc_rm2-6 \
compex_wpq873 \
dynalink_dl-wrx36 \
edgecore_eap102 \
edimax_cax1800 \
linksys_mr7350 \
linksys_mx4200 \
linksys_mx5300 \
linksys_mx8500 \
linksys_whw03 \
netgear_lbr20 \
netgear_rax120v2 \
netgear_sxk80 \
netgear_wax214 \
netgear_wax218 \
netgear_wax620 \
netgear_wax630 \
prpl_haze \
qihoo_360v6 \
qnap_301w \
redmi_ax6 \
skspruce_wia3300-20 \
spectrum_sax1v1k \
tplink_eap660hd-v1 \
wallys_dr40x9 \
xiaomi_ax3600 \
xiaomi_ax9000 \
yyets_le1 \
yuncore_ax880 \
yuncore_fap650 \
zbtlink_zbt-z800ax \
zte_mf269 \
zte_mf287 \
zte_mf287plus \
zyxel_nbg7815
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
define Package/ipq-wifi-default
SUBMENU:=ath10k Board-Specific Overrides
SECTION:=firmware
CATEGORY:=Firmware
DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_qualcommax)
TITLE:=Custom Board
endef
define ipq-wifi-install-one-to
$(INSTALL_DIR) $(2)/lib/firmware/ath10k/$(3)/
$(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
endef
define ipq-wifi-install-ath11-one-to
$(INSTALL_DIR) $(2)/lib/firmware/ath11k/$(3)/
$(INSTALL_DATA) $(1) $(2)/lib/firmware/ath11k/$(3)/board-2.bin
endef
define ipq-wifi-install-one
$(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
$(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
$(if $(filter $(suffix $(1)),.QCA9889 .qca9889),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9887/hw1.0),\
$(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
$(if $(filter $(suffix $(1)),.QCA99X0 .qca99x0),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA99X0/hw2.0),\
$(if $(filter $(suffix $(1)),.IPQ6018 .ipq6018),\
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ6018/hw1.0),\
$(if $(filter $(suffix $(1)),.IPQ8074 .ipq8074),\
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ8074/hw2.0),\
$(if $(filter $(suffix $(1)),.QCN9074 .qcn9074),\
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),QCN9074/hw1.0),\
$(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
))))))))
endef
# Blank line required at end of above define due to foreach context
define generate-ipq-wifi-package
define Package/ipq-wifi-$(1)
$(call Package/ipq-wifi-default)
TITLE:=board-2.bin Overrides for $(2)
CONFLICTS:=$(PREV_BOARD)
endef
define Package/ipq-wifi-$(1)/description
The $(2) requires board-specific, reference ("cal") data
that is not yet present in the upstream wireless firmware distribution.
This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.
This is package is only necessary for the $(2).
Do not install it for any other device!
endef
define Package/ipq-wifi-$(1)/install-overlay
$$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard $(PKG_BUILD_DIR)/board-$(1).*),\
$$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
endef
PREV_BOARD+=ipq-wifi-$(1)
endef
# To add local files for testing:
# 1. create a new directory in the ipq-wifi package directory called "files".
# 2. place there the needed board files.
#
# To send a board file upstream:
# 1. create a pull request in https://github.com/openwrt/firmware_qca-wireless or
# send a patch to the mailing list adding the tag firmware/qca-wireless before
# the PATCH tag.
# 2. create a pull request in the main openwrt repository bumping the ipq-wifi
# package to the new version and adding the required lines to add the board file.
#
# Changes needed to the ipq-wifi Makefile:
# 1. Add board name to ALLWIFIBOARDS
# 2. Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
#
# Board files should follow this name structure:
# board-<devicename>.<qca4019|qca9888|qca9889|qca9984|qca99x0|ipq8074>
$(eval $(call generate-ipq-wifi-package,8devices_mango,8devices Mango))
$(eval $(call generate-ipq-wifi-package,arcadyan_aw1000,Arcadyan AW1000))
$(eval $(call generate-ipq-wifi-package,asus_rt-ax89x,Asus RT-AX89X))
$(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12))
$(eval $(call generate-ipq-wifi-package,cambiumnetworks_xe34,Cambium Networks XE3-4))
$(eval $(call generate-ipq-wifi-package,cmcc_rm2-6,CMCC RM2-6))
$(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
$(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
$(eval $(call generate-ipq-wifi-package,linksys_mr7350,Linksys MR7350))
$(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
$(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
$(eval $(call generate-ipq-wifi-package,linksys_mx8500,Linksys MX8500))
$(eval $(call generate-ipq-wifi-package,linksys_whw03,Linksys WHW03))
$(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))
$(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
$(eval $(call generate-ipq-wifi-package,netgear_sxk80,Netgear SXK80))
$(eval $(call generate-ipq-wifi-package,netgear_wax214,Netgear WAX214))
$(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
$(eval $(call generate-ipq-wifi-package,netgear_wax620,Netgear WAX620))
$(eval $(call generate-ipq-wifi-package,netgear_wax630,Netgear WAX630))
$(eval $(call generate-ipq-wifi-package,qihoo_360v6,Qihoo 360V6))
$(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
$(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
$(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
$(eval $(call generate-ipq-wifi-package,skspruce_wia3300-20,SKSpruce WIA3300-20))
$(eval $(call generate-ipq-wifi-package,spectrum_sax1v1k,Spectrum SAX1V1K))
$(eval $(call generate-ipq-wifi-package,tplink_eap660hd-v1,TP-Link EAP660 HD v1))
$(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
$(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
$(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
$(eval $(call generate-ipq-wifi-package,yyets_le1,YYeTs LE1))
$(eval $(call generate-ipq-wifi-package,yuncore_ax880,Yuncore AX880))
$(eval $(call generate-ipq-wifi-package,yuncore_fap650,Yuncore FAP650))
$(eval $(call generate-ipq-wifi-package,zbtlink_zbt-z800ax,Zbtlink ZBT-Z800AX))
$(eval $(call generate-ipq-wifi-package,zte_mf269,ZTE MF269))
$(eval $(call generate-ipq-wifi-package,zte_mf287,ZTE MF287))
$(eval $(call generate-ipq-wifi-package,zte_mf287plus,ZTE MF287Plus))
$(eval $(call generate-ipq-wifi-package,zyxel_nbg7815,Zyxel NBG7815))
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
Reference in New Issue View Git Blame Copy Permalink