mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
ec6293febc
Ran update_kernel.sh in a fresh clone without any existing toolchains.
Manually rebased:
pending-5.4/611-netfilter_match_bypass_default_table.patch
The upstream change affecting this patch is the revert of an earlier
kernel commit. Therefore, we just revert our corresponding changes
in [1].
Build system: x86_64
Build-tested: ipq806x/R7800
[1] 9b1b89229f ("kernel: bump 5.4 to 5.4.86")
Signed-off-by: John Audia <graysky@archlinux.us>
[adjust manually rebased patch, add explanation]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
315 lines
6.4 KiB
Diff
315 lines
6.4 KiB
Diff
From 314a3a062e5e8fe76b3c43a8731ffe4bd58bc1be Mon Sep 17 00:00:00 2001
|
|
From: Yuantian Tang <andy.tang@nxp.com>
|
|
Date: Mon, 5 Nov 2018 17:40:20 +0800
|
|
Subject: [PATCH] arm64: dts: nxp: add more thermal zone support
|
|
|
|
To enable all the supported thermal sensors, add sensor id information
|
|
to thermal zone node.
|
|
Dts for ls1012a, ls1046a, ls1043a, ls1088a are updated.
|
|
|
|
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
|
|
---
|
|
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 39 ++++------------
|
|
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 61 ++++++++++++--------------
|
|
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 57 ++++++++++--------------
|
|
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 53 +++++++---------------
|
|
4 files changed, 75 insertions(+), 135 deletions(-)
|
|
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
|
|
@@ -28,7 +28,7 @@
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
- cpu0: cpu@0 {
|
|
+ cooling_map0: cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0>;
|
|
@@ -100,36 +100,7 @@
|
|
mask = <0x02>;
|
|
};
|
|
|
|
- thermal-zones {
|
|
- cpu_thermal: cpu-thermal {
|
|
- polling-delay-passive = <1000>;
|
|
- polling-delay = <5000>;
|
|
- thermal-sensors = <&tmu 0>;
|
|
-
|
|
- trips {
|
|
- cpu_alert: cpu-alert {
|
|
- temperature = <85000>;
|
|
- hysteresis = <2000>;
|
|
- type = "passive";
|
|
- };
|
|
-
|
|
- cpu_crit: cpu-crit {
|
|
- temperature = <95000>;
|
|
- hysteresis = <2000>;
|
|
- type = "critical";
|
|
- };
|
|
- };
|
|
-
|
|
- cooling-maps {
|
|
- map0 {
|
|
- trip = <&cpu_alert>;
|
|
- cooling-device =
|
|
- <&cpu0 THERMAL_NO_LIMIT
|
|
- THERMAL_NO_LIMIT>;
|
|
- };
|
|
- };
|
|
- };
|
|
- };
|
|
+ #include "fsl-tmu.dtsi"
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
@@ -573,3 +544,9 @@
|
|
};
|
|
};
|
|
};
|
|
+
|
|
+&thermal_zones {
|
|
+ thermal-zone0 {
|
|
+ status = "okay";
|
|
+ };
|
|
+};
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
|
|
@@ -39,7 +39,7 @@
|
|
*
|
|
* Currently supported enable-method is psci v0.2
|
|
*/
|
|
- cpu0: cpu@0 {
|
|
+ cooling_map0: cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0>;
|
|
@@ -148,38 +148,7 @@
|
|
mask = <0x02>;
|
|
};
|
|
|
|
- thermal-zones {
|
|
- cpu_thermal: cpu-thermal {
|
|
- polling-delay-passive = <1000>;
|
|
- polling-delay = <5000>;
|
|
-
|
|
- thermal-sensors = <&tmu 3>;
|
|
-
|
|
- trips {
|
|
- cpu_alert: cpu-alert {
|
|
- temperature = <85000>;
|
|
- hysteresis = <2000>;
|
|
- type = "passive";
|
|
- };
|
|
- cpu_crit: cpu-crit {
|
|
- temperature = <95000>;
|
|
- hysteresis = <2000>;
|
|
- type = "critical";
|
|
- };
|
|
- };
|
|
-
|
|
- cooling-maps {
|
|
- map0 {
|
|
- trip = <&cpu_alert>;
|
|
- cooling-device =
|
|
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
- };
|
|
- };
|
|
- };
|
|
- };
|
|
+ #include "fsl-tmu.dtsi"
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
@@ -916,3 +885,29 @@
|
|
|
|
#include "qoriq-qman-portals.dtsi"
|
|
#include "qoriq-bman-portals.dtsi"
|
|
+
|
|
+&thermal_zones {
|
|
+ thermal-zone0 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ thermal-zone1 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ thermal-zone2 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ thermal-zone3 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ thermal-zone4 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ thermal-zone5 {
|
|
+ status = "okay";
|
|
+ };
|
|
+};
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
|
|
@@ -34,7 +34,7 @@
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
- cpu0: cpu@0 {
|
|
+ cooling_map0: cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72";
|
|
reg = <0x0>;
|
|
@@ -116,38 +116,7 @@
|
|
mask = <0x02>;
|
|
};
|
|
|
|
- thermal-zones {
|
|
- cpu_thermal: cpu-thermal {
|
|
- polling-delay-passive = <1000>;
|
|
- polling-delay = <5000>;
|
|
- thermal-sensors = <&tmu 3>;
|
|
-
|
|
- trips {
|
|
- cpu_alert: cpu-alert {
|
|
- temperature = <85000>;
|
|
- hysteresis = <2000>;
|
|
- type = "passive";
|
|
- };
|
|
-
|
|
- cpu_crit: cpu-crit {
|
|
- temperature = <95000>;
|
|
- hysteresis = <2000>;
|
|
- type = "critical";
|
|
- };
|
|
- };
|
|
-
|
|
- cooling-maps {
|
|
- map0 {
|
|
- trip = <&cpu_alert>;
|
|
- cooling-device =
|
|
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
- };
|
|
- };
|
|
- };
|
|
- };
|
|
+ #include "fsl-tmu.dtsi"
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
@@ -883,3 +852,25 @@
|
|
|
|
#include "qoriq-qman-portals.dtsi"
|
|
#include "qoriq-bman-portals.dtsi"
|
|
+
|
|
+&thermal_zones {
|
|
+ thermal-zone0 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ thermal-zone1 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ thermal-zone2 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ thermal-zone3 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ thermal-zone4 {
|
|
+ status = "okay";
|
|
+ };
|
|
+};
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
|
|
@@ -25,7 +25,7 @@
|
|
#size-cells = <0>;
|
|
|
|
/* We have 2 clusters having 4 Cortex-A53 cores each */
|
|
- cpu0: cpu@0 {
|
|
+ cooling_map0: cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0>;
|
|
@@ -61,7 +61,7 @@
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
- cpu4: cpu@100 {
|
|
+ cooling_map1: cpu4: cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x100>;
|
|
@@ -128,42 +128,7 @@
|
|
};
|
|
};
|
|
|
|
- thermal-zones {
|
|
- cpu_thermal: cpu-thermal {
|
|
- polling-delay-passive = <1000>;
|
|
- polling-delay = <5000>;
|
|
- thermal-sensors = <&tmu 0>;
|
|
-
|
|
- trips {
|
|
- cpu_alert: cpu-alert {
|
|
- temperature = <85000>;
|
|
- hysteresis = <2000>;
|
|
- type = "passive";
|
|
- };
|
|
-
|
|
- cpu_crit: cpu-crit {
|
|
- temperature = <95000>;
|
|
- hysteresis = <2000>;
|
|
- type = "critical";
|
|
- };
|
|
- };
|
|
-
|
|
- cooling-maps {
|
|
- map0 {
|
|
- trip = <&cpu_alert>;
|
|
- cooling-device =
|
|
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
- <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
- <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
- <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
- <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
- };
|
|
- };
|
|
- };
|
|
- };
|
|
+ #include "fsl-tmu.dtsi"
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
@@ -879,3 +844,15 @@
|
|
};
|
|
};
|
|
};
|
|
+
|
|
+#include "fsl-tmu-map1.dtsi"
|
|
+
|
|
+&thermal_zones {
|
|
+ thermal-zone0 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ thermal-zone1 {
|
|
+ status = "okay";
|
|
+ };
|
|
+};
|