mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 17:48:58 +00:00
0494278073
The ar71xx GPIO driver only uses 0x24 registers, all following GPIO registers are using to control pinmux functions, which are not handles by the GPIO driver but the generic Linux pinctrl driver. For some SoC conflicting address ranges were defined for these (AR7240 & AR9330). Resolve these cases and align the address space of the GPIO controller between all SoCs, as the used address space of the driver is identical for all these. Signed-off-by: David Bauer <mail@david-bauer.net>
166 lines
3.4 KiB
Plaintext
166 lines
3.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "ath79.dtsi"
|
|
|
|
/ {
|
|
compatible = "qca,ar7240";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200";
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "mips,mips24Kc";
|
|
clocks = <&pll ATH79_CLK_CPU>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
ahb: ahb {
|
|
apb {
|
|
ddr_ctrl: memory-controller@18000000 {
|
|
compatible = "qca,ar9132-ddr-controller",
|
|
"qca,ar7240-ddr-controller";
|
|
reg = <0x18000000 0x100>;
|
|
|
|
#qca,ddr-wb-channel-cells = <1>;
|
|
};
|
|
|
|
uart: uart@18020000 {
|
|
compatible = "ns16550a";
|
|
reg = <0x18020000 0x20>;
|
|
interrupts = <3>;
|
|
|
|
clocks = <&pll ATH79_CLK_AHB>;
|
|
clock-names = "uart";
|
|
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
no-loopback-test;
|
|
};
|
|
|
|
gpio: gpio@18040000 {
|
|
compatible = "qca,ar7240-gpio",
|
|
"qca,ar7100-gpio";
|
|
reg = <0x18040000 0x28>;
|
|
interrupts = <2>;
|
|
|
|
ngpios = <18>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pinmux: pinmux@18040028 {
|
|
compatible = "pinctrl-single";
|
|
|
|
reg = <0x18040028 0x8>;
|
|
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x1>;
|
|
#pinctrl-cells = <2>;
|
|
|
|
jtag_disable_pins: pinmux_jtag_disable_pins {
|
|
pinctrl-single,bits = <0x0 0x1 0x1>;
|
|
};
|
|
|
|
switch_led_disable_pins: pinmux_switch_led_disable_pins {
|
|
pinctrl-single,bits = <0x0 0x0 0xf8>;
|
|
};
|
|
|
|
clks_disable_pins: pinmux_clks_disable_pins {
|
|
pinctrl-single,bits = <0x0 0x0 0x81f00>;
|
|
};
|
|
};
|
|
|
|
pll: pll-controller@18050000 {
|
|
compatible = "qca,ar7240-pll", "syscon";
|
|
reg = <0x18050000 0x3c>;
|
|
|
|
clock-names = "ref";
|
|
/* The board must provides the ref clock */
|
|
|
|
#clock-cells = <1>;
|
|
clock-output-names = "cpu", "ddr", "ahb";
|
|
};
|
|
|
|
wdt: wdt@18060008 {
|
|
compatible = "qca,ar7130-wdt";
|
|
reg = <0x18060008 0x8>;
|
|
|
|
interrupts = <4>;
|
|
|
|
clocks = <&pll ATH79_CLK_AHB>;
|
|
clock-names = "wdt";
|
|
};
|
|
|
|
rst: reset-controller@1806001c {
|
|
compatible = "qca,ar7240-reset",
|
|
"qca,ar7100-reset";
|
|
reg = <0x1806001c 0x4>;
|
|
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pcie: pcie-controller@180c0000 {
|
|
compatible = "qcom,ar7240-pci";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
bus-range = <0x0 0x0>;
|
|
reg = <0x180c0000 0x1000>, /* CRP */
|
|
<0x180f0000 0x100>, /* CTRL */
|
|
<0x14000000 0x1000>; /* CFG */
|
|
reg-names = "crp_base", "ctrl_base", "cfg_base";
|
|
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
|
|
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <2>;
|
|
|
|
resets = <&rst 6>, <&rst 7>;
|
|
reset-names = "hc", "phy";
|
|
|
|
device_type = "pci";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-map-mask = <0 0 0 1>;
|
|
interrupt-map = <0 0 0 0 &pcie 0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
spi: spi@1f000000 {
|
|
compatible = "qca,ar7240-spi",
|
|
"qca,ar7100-spi";
|
|
reg = <0x1f000000 0x10>;
|
|
|
|
clocks = <&pll ATH79_CLK_AHB>;
|
|
clock-names = "ahb";
|
|
|
|
status = "disabled";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpuintc {
|
|
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
|
|
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
|
|
<&ddr_ctrl 0>, <&ddr_ctrl 1>;
|
|
};
|