openwrt/target/linux/ramips/dts/mt7628an_tplink_tl-wr841n-v14.dts
Shiji Yang e93f41adee
ramips: convert MT7628 EEPROM to NVMEM format
This patch converts MT7628 WiFi calibration data to NVMEM format. The
EEPROM size is 0x400.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 12:07:26 +02:00

141 lines
2.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,tl-wr841n-v14", "mediatek,mt7628an-soc";
model = "TP-Link TL-WR841N v14";
aliases {
led-boot = &led_wlan;
led-failsafe = &led_wlan;
led-upgrade = &led_wlan;
};
chosen {
bootargs = "console=ttyS0,115200";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
lan {
label = "green:lan";
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
};
wan_green {
label = "green:wan";
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
};
led_wlan: wlan {
label = "green:wlan";
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wan_orange {
label = "orange:wan";
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "boot";
reg = <0x0 0x10000>;
read-only;
};
partition@10000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x10000 0x3e0000>;
};
factory: partition@3f0000 {
compatible = "nvmem-cells";
label = "factory";
reg = <0x3f0000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
macaddr_factory_f100: macaddr@f100 {
reg = <0xf100 0x6>;
};
};
};
};
};
&ehci {
status = "disabled";
};
&ohci {
status = "disabled";
};
&wmac {
status = "okay";
nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_f100>;
nvmem-cell-names = "eeprom", "mac-address";
};
&ethernet {
nvmem-cells = <&macaddr_factory_f100>;
nvmem-cell-names = "mac-address";
};
&esw {
mediatek,portmap = <0x3e>;
};
&state_default {
gpio {
groups = "p4led_an", "p3led_an", "p2led_an", "p1led_an", "p0led_an", "wdt";
function = "gpio";
};
};
&gpio {
led_wlan_enable {
gpio-hog;
gpios = <43 GPIO_ACTIVE_HIGH>;
output-high;
};
};