openwrt/target/linux/ramips/dts/mt7621_dlink_dir-853-a1.dts
Shiji Yang 65cd6a6fec
ramips: convert MT7613 and MT7615 EEPROM to NVMEM format for MT7621
This patch converts MT7613 and MT7615 WiFi calibration data to NVMEM
format. The EEPROM size is 0x4da8.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-09 11:15:52 +02:00

219 lines
3.6 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "dlink,dir-853-a1", "mediatek,mt7621-soc";
model = "D-Link DIR-853 A1";
aliases {
led-boot = &led_power_orange;
led-failsafe = &led_power_blue;
led-running = &led_power_blue;
led-upgrade = &led_net_orange;
};
keys {
compatible = "gpio-keys";
wifi {
label = "wifi";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
wlan5g {
label = "blue:wlan5g";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1radio";
};
wlan2g {
label = "blue:wlan2g";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0radio";
};
usb_blue {
label = "blue:usb";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
trigger-sources = <&xhci_ehci_port1>;
linux,default-trigger = "usbport";
};
led_power_orange: power_orange {
label = "orange:power";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_power_blue: power_blue {
label = "blue:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led_net_orange: net_orange {
label = "orange:net";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
net_blue {
label = "blue:net";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
compatible = "nvmem-cells";
label = "factory";
reg = <0x40000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x4da8>;
};
macaddr_factory_e000: macaddr@e000 {
reg = <0xe000 0x6>;
};
macaddr_factory_e006: macaddr@e006 {
reg = <0xe006 0x6>;
};
};
partition@50000 {
label = "config2_stock";
reg = <0x50000 0x10000>;
read-only;
};
partition@60000 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,padding = <96>;
label = "firmware";
reg = <0x60000 0xf50000>;
};
partition@fb0000 {
label = "private_stock";
reg = <0xfb0000 0x50000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
/* The correct Mac addresses are set in 10_fix_wifi_mac. */
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_e000>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy4>;
nvmem-cells = <&macaddr_factory_e006>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy4: ethernet-phy@4 {
reg = <4>;
};
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan4";
};
port@1 {
status = "okay";
label = "lan3";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan1";
};
};
};
&state_default {
gpio {
groups = "i2c", "uart2", "uart3", "jtag", "wdt";
function = "gpio";
};
};