openwrt/target/linux/ramips/dts/rt3352_allnet_all5002.dts
Shiji Yang da42c329c6
ramips: convert rt2x00 EEPROM to NVMEM format
This patch converts legacy Ralink SoCs and MT7620 WiFi calibration
data to NVMEM format. The EEPROM size is 0x200.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 12:07:26 +02:00

125 lines
1.9 KiB
Plaintext

#include "rt3352.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "allnet,all5002", "ralink,rt3352-soc";
model = "Allnet ALL5002";
i2c-gpio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "i2c-gpio";
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <10>;
pcf0: iexp@38 {
#gpio-cells = <2>;
compatible = "inxp,pcf8574a";
reg = <0x38>;
gpio-controller;
};
hwmon@4b {
compatible = "national,lm92";
reg = <0x4b>;
};
};
leds {
compatible = "gpio-leds";
ld1 {
label = "green:ld1";
gpios = <&pcf0 0 GPIO_ACTIVE_LOW>;
};
ld2 {
label = "green:ld2";
gpios = <&pcf0 1 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
compatible = "nvmem-cells";
label = "factory";
reg = <0x40000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x200>;
};
macaddr_factory_28: macaddr@28 {
reg = <0x28 0x6>;
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x1fb0000>;
};
};
};
};
&state_default {
gpio {
groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
function = "gpio";
};
};
&ethernet {
nvmem-cells = <&macaddr_factory_28>;
nvmem-cell-names = "mac-address";
};
&esw {
mediatek,portmap = <0x3f>;
};
&wmac {
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};