openwrt/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts
Shiji Yang 6f31941d38 Revert "ramips: convert MT7915 EEPROM to NVMEM format"
Some MT7915 devices need to load the second part of the eeprom to
work properly. The mt76 driver is not yet ready to read the pre-cal
data via the NVMEM cell. Therefore, partially revert commit to fix
the device probe issue on some devices.

P.S.
Except for D-Link and Ubnt devices, It is still uncertain whether
pre-cal data is required for other devices in the patch.

This partially reverts commit 9ac891f8c4.

Fixes: https://github.com/openwrt/openwrt/issues/13700
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 20:57:07 +08:00

199 lines
3.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,eap615-wall-v1", "mediatek,mt7621-soc";
model = "TP-Link EAP615-Wall v1";
aliases {
label-mac-device = &gmac0;
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
};
chosen {
bootargs = "console=ttyS0,115200";
};
leds {
compatible = "gpio-leds";
led_status: status {
label = "white:status";
color = <LED_COLOR_ID_WHITE>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
led {
label = "led";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
};
reset {
label = "reset";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-export {
compatible = "gpio-export";
poe_passthrough {
gpio-export,name = "poe-passthrough";
gpio-export,output = <0>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
};
};
};
&ethernet {
reg = <0x1e100000 0xe000>;
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "partition-table";
reg = <0x80000 0x10000>;
read-only;
};
info: partition@90000 {
label = "product-info";
reg = <0x90000 0x10000>;
read-only;
};
partition@a0000 {
compatible = "denx,fit";
label = "firmware";
reg = <0xa0000 0xcf0000>;
};
partition@d90000 {
label = "user-config";
reg = <0xd90000 0x60000>;
read-only;
};
partition@f30000 {
label = "mutil-log";
reg = <0xf30000 0x80000>;
read-only;
};
partition@fb0000 {
label = "oops";
reg = <0xfb0000 0x40000>;
read-only;
};
radio: partition@ff0000 {
label = "radio";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&state_default {
gpio {
groups = "uart2", "uart3";
function = "gpio";
};
};
&pcie {
status = "okay";
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&radio 0x0>;
mediatek,disable-radar-background;
};
};
&gmac0 {
nvmem-cells = <&macaddr_info_8>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "lan0";
phy-handle = <&ethphy0>;
nvmem-cells = <&macaddr_info_8>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "lan3";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan1";
};
};
};
&info {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_info_8: macaddr@8 {
reg = <0x8 0x6>;
};
};