mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
afd4375a33
In contrast to the U-Boot version shipped with older versions of Turris Omnia (CZ11NIC13, CZ11NIC20), the version shipped with Turris Omnia 2019 (CZ11NIC23) relies on the existence of /boot.scr. Consequently, add a suitable boot script to the sysupgrade image. Flash instructions for Turris Omnia 2019: - Download openwrt-...-sysupgrade.img.gz, gunzip it, and copy the resulting .img file to the root of a USB flash drive (FAT32 or ext2/3/4). - Enter a rescue shell: Either via 5-LED reset and ssh root@192.168.1.1 on LAN port 4, or via 7-LED reset and the serial console. - Insert the USB drive and mount it: mkdir /mnt; mount /dev/sda1 /mnt - Flash the OpenWrt image to eMMC: dd if=/mnt/openwrt-...-sysupgrade.img of=/dev/mmcblk0 bs=4096 conv=fsync - Reboot. Flash instructions using a temporary "medkit" installation were written for the older versions of Turris Omnia, and will *not* work on the Turris Omnia 2019. Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> Reviewed-by: Tomasz Maciej Nowak <tomek_n@o2.pl> Tested-by: W. Michael Petullo <mike@flyn.org> (Turris Omnia "2020")
18 lines
633 B
Plaintext
18 lines
633 B
Plaintext
# Determine root device
|
|
setexpr rootpart ${distro_bootpart} + 1
|
|
if test ${devtype} = mmc -a ${devnum} = 0; then
|
|
setenv rootdev /dev/mmcblk0p${rootpart}
|
|
elif test ${devtype} = scsi -a ${devnum} = 0; then
|
|
setenv rootdev /dev/sda${rootpart}
|
|
else
|
|
# New U-Boot only
|
|
part uuid ${devtype} ${devnum}:${rootpart} uuid
|
|
setenv rootdev PARTUUID=${uuid}
|
|
fi
|
|
setenv bootargs earlyprintk console=ttyS0,115200 root=${rootdev} rootfstype=auto rootwait
|
|
|
|
# Load and boot
|
|
load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} @DTB@.dtb
|
|
load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} zImage
|
|
bootz ${kernel_addr_r} - ${fdt_addr_r}
|