openwrt/target/linux/ramips/dts/MT7620a.dts

/dts-v1/;

/include/ "mt7620a.dtsi"

/ {
	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	model = "Ralink MT7620a + MT7610e evaluation board";

	palmbus@10000000 {
		spi@b00 {
			status = "okay";
		
			m25p80@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "en25q64";
				reg = <0 0>;
				linux,modalias = "m25p80", "en25q64";
				spi-max-frequency = <10000000>;

				partition@0 {
					label = "u-boot";
					reg = <0x0 0x30000>;
					read-only;
				};

				partition@30000 {
					label = "u-boot-env";
					reg = <0x30000 0x10000>;
					read-only;
				};

				factory: partition@40000 {
					label = "factory";
					reg = <0x40000 0x10000>;
					read-only;
				};

				partition@50000 {
					label = "firmware";
					reg = <0x50000 0x7b0000>;
				};
			};
		};
	};

	pinctrl {
		state_default: pinctrl0 {
			gpio {
				ralink,group = "mdio", "i2c", "uartf";
				ralink,function = "gpio";
			};
		};
	};

	ethernet@10100000 {
		status = "okay";
		
		port@4 {
			compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port";
			reg = <4>;
			phy-mode = "rgmii";
			phy-handle = <&phy4>;
		};

		port@5 {
			compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port";
			reg = <5>;
			phy-mode = "rgmii";
			phy-handle = <&phy5>;
		};

		mdio-bus {
			status = "okay";

			phy4: ethernet-phy@4 {
				reg = <4>;
				phy-mode = "rgmii";
			};

			phy5: ethernet-phy@5 {
				reg = <5>;
				phy-mode = "rgmii";
			};
		};
	};

	gsw@10110000 {
		ralink,port4 = "gmac";

		pinctrl-names = "default";
		pinctrl-0 = <&ephy_pins>;
	};

	sdhci@10130000 {
		status = "okay";
	};

	pcie@10140000 {
		status = "okay";
	};

	gpio-keys-polled {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;
		s2 {
			label = "S2";
			gpios = <&gpio0 1 1>;
			linux,code = <0x100>;
		};
		s3 {
			label = "S3";
			gpios = <&gpio0 2 1>;
			linux,code = <0x101>;
		};
	};
};