mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 01:28:59 +00:00
c6ddf8d502
Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between
5.4.171 and 5.4.179.
The following 3 patches do not apply any more:
* target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
This was already integrated in kernel v5.4-rc1, it was never needed.
* target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
* target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
I think these were done to fix the problem which was really fixed in
commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio
hogs") from v5.4.175
target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
Move fwnode_device_is_available to the same position as in kernel 5.10.
target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts:
ls1028a-qds: move rtc node to the correct i2c bus")
Compile-tested: lantiq/xrx200, bcm27xx/bcm2710
Run-tested: lantiq/xrx200
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
52 lines
1.5 KiB
Diff
52 lines
1.5 KiB
Diff
From 238506ebdea7a0bb928af8403287d5b0d71cdfee Mon Sep 17 00:00:00 2001
|
|
From: Stefan Wahren <wahrenst@gmx.net>
|
|
Date: Fri, 16 Aug 2019 22:32:02 +0200
|
|
Subject: [PATCH] ARM: dts: bcm283x: Remove simple-bus from fixed
|
|
clocks
|
|
|
|
commit 4b2d24662126b1e2a6b95c9dfe9e9044e105e5bd upstream.
|
|
|
|
The fixed clocks doesn't form some kind of bus. So let's remove it.
|
|
This fixes the follow DT schema warnings:
|
|
|
|
clocks: clock@3:reg:0: [3] is too short
|
|
clocks: clock@4:reg:0: [4] is too short
|
|
clocks: $nodename:0: 'clocks' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
|
|
clocks: #size-cells:0:0: 0 is not one of [1, 2]
|
|
clocks: 'ranges' is a required property
|
|
clock@3: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
|
|
clock@4: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
|
|
|
|
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
|
|
---
|
|
arch/arm/boot/dts/bcm283x.dtsi | 10 ++--------
|
|
1 file changed, 2 insertions(+), 8 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/bcm283x.dtsi
|
|
+++ b/arch/arm/boot/dts/bcm283x.dtsi
|
|
@@ -636,22 +636,16 @@
|
|
};
|
|
|
|
clocks {
|
|
- compatible = "simple-bus";
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
-
|
|
/* The oscillator is the root of the clock tree. */
|
|
- clk_osc: clock@3 {
|
|
+ clk_osc: clk-osc {
|
|
compatible = "fixed-clock";
|
|
- reg = <3>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "osc";
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
- clk_usb: clock@4 {
|
|
+ clk_usb: clk-usb {
|
|
compatible = "fixed-clock";
|
|
- reg = <4>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "otg";
|
|
clock-frequency = <480000000>;
|