openwrt

mirror of https://github.com/openwrt/openwrt.git synced 2024-12-30 02:29:01 +00:00

History

Felix Fietkau f7e09198fe (1/6) bcm57xx: init from diag I've been working to finish up the bcm57xx module package nbd posted a few months ago. I am no expert, just had some spare time and some motivation. Here is the background: https://dev.openwrt.org/ticket/2744 This first patch disables the bcm57xx gpio setup in broadcom-diag. The switch needs to be initialized by the driver so the driver can then reset the switch ASAP. If the switch isn't reset quickly enough, it will forward packets between the WAN and LAN, which will cause problems with modems that only allow one mac to access the internet. Tested on wrt350n. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> SVN-Revision: 11466	2008-06-15 11:09:27 +00:00
..
src	(1/6) bcm57xx: init from diag	2008-06-15 11:09:27 +00:00
Makefile	Add support for the WL-500gP v2	2008-03-31 08:04:56 +00:00

Felix Fietkau f7e09198fe (1/6) bcm57xx: init from diag

I've been working to finish up the bcm57xx module package nbd
posted a few months ago.  I am no expert, just had some spare
time and some motivation.  Here is the background:

https://dev.openwrt.org/ticket/2744

This first patch disables the bcm57xx gpio setup in broadcom-diag.
The switch needs to be initialized by the driver so the driver can
then reset the switch ASAP.  If the switch isn't reset quickly enough,
it will forward packets between the WAN and LAN, which will cause
problems with modems that only allow one mac to access the internet.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11466

2008-06-15 11:09:27 +00:00

src

(1/6) bcm57xx: init from diag

2008-06-15 11:09:27 +00:00

Makefile

Add support for the WL-500gP v2

2008-03-31 08:04:56 +00:00