mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
0fed36dd48
Refreshed all patches. Compile-tested on: imx6 Runtime-tested on: imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
130 lines
4.3 KiB
Diff
130 lines
4.3 KiB
Diff
From 61d471c8da972c7ebbaf63779bf8100ee1ec54eb Mon Sep 17 00:00:00 2001
|
|
From: Ran Wang <ran.wang_1@nxp.com>
|
|
Date: Wed, 16 Jan 2019 13:23:17 +0800
|
|
Subject: [PATCH] usb: dwc3: Add workaround for host mode VBUS glitch when boot
|
|
|
|
When DWC3 is set to host mode by programming register DWC3_GCTL, VBUS
|
|
(or its control signal) will be turned on immediately on related Root Hub
|
|
ports. Then, the VBUS is turned off for a little while(15us) when do xhci
|
|
reset (conducted by xhci driver) and back to normal finally, we can
|
|
observe a negative glitch of related signal happen.
|
|
|
|
This VBUS glitch might cause some USB devices enumeration fail if kernel
|
|
boot with them connected. Such as LS1012AFWRY/LS1043ARDB/LX2160AQDS
|
|
/LS1088ARDB with Kingston 16GB USB2.0/Kingston USB3.0/JetFlash Transcend
|
|
4GB USB2.0 drives. The fail cases include enumerated as full-speed device
|
|
or report wrong device descriptor, etc.
|
|
|
|
One SW workaround which can fix this is by programing all xhci PORTSC[PP]
|
|
to 0 to turn off VBUS immediately after setting host mode in DWC3 driver
|
|
(per signal measurement result, it will be too late to do it in
|
|
xhci-plat.c or xhci.c). Then, after xhci reset complete in xhci driver,
|
|
PORTSC[PP]s' value will back to 1 automatically and VBUS on at that time,
|
|
no glitch happen and normal enumeration process has no impact.
|
|
|
|
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
|
|
Reviewed-by: Peter Chen <peter.chen@nxp.com>
|
|
---
|
|
drivers/usb/dwc3/core.c | 3 +++
|
|
drivers/usb/dwc3/core.h | 3 +++
|
|
drivers/usb/dwc3/host.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
|
|
3 files changed, 54 insertions(+)
|
|
|
|
--- a/drivers/usb/dwc3/core.c
|
|
+++ b/drivers/usb/dwc3/core.c
|
|
@@ -1355,6 +1355,9 @@ static void dwc3_get_properties(struct d
|
|
dwc->dis_metastability_quirk = device_property_read_bool(dev,
|
|
"snps,dis_metastability_quirk");
|
|
|
|
+ dwc->host_vbus_glitches = device_property_read_bool(dev,
|
|
+ "snps,host-vbus-glitches");
|
|
+
|
|
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
|
|
dwc->tx_de_emphasis = tx_de_emphasis;
|
|
|
|
--- a/drivers/usb/dwc3/core.h
|
|
+++ b/drivers/usb/dwc3/core.h
|
|
@@ -1041,6 +1041,8 @@ struct dwc3_scratchpad_array {
|
|
* 2 - No de-emphasis
|
|
* 3 - Reserved
|
|
* @dis_metastability_quirk: set to disable metastability quirk.
|
|
+ * @host_vbus_glitches: set to avoid vbus glitch during
|
|
+ * xhci reset.
|
|
* @imod_interval: set the interrupt moderation interval in 250ns
|
|
* increments or 0 to disable.
|
|
*/
|
|
@@ -1233,6 +1235,7 @@ struct dwc3 {
|
|
unsigned tx_de_emphasis:2;
|
|
|
|
unsigned dis_metastability_quirk:1;
|
|
+ unsigned host_vbus_glitches:1;
|
|
|
|
u16 imod_interval;
|
|
};
|
|
--- a/drivers/usb/dwc3/host.c
|
|
+++ b/drivers/usb/dwc3/host.c
|
|
@@ -9,8 +9,49 @@
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
+#include "../host/xhci.h"
|
|
+
|
|
#include "core.h"
|
|
|
|
+
|
|
+#define XHCI_HCSPARAMS1 0x4
|
|
+#define XHCI_PORTSC_BASE 0x400
|
|
+
|
|
+/*
|
|
+ * dwc3_power_off_all_roothub_ports - Power off all Root hub ports
|
|
+ * @dwc3: Pointer to our controller context structure
|
|
+ */
|
|
+static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc)
|
|
+{
|
|
+ int i, port_num;
|
|
+ u32 reg, op_regs_base, offset;
|
|
+ void __iomem *xhci_regs;
|
|
+
|
|
+ /* xhci regs is not mapped yet, do it temperary here */
|
|
+ if (dwc->xhci_resources[0].start) {
|
|
+ xhci_regs = ioremap(dwc->xhci_resources[0].start,
|
|
+ DWC3_XHCI_REGS_END);
|
|
+ if (IS_ERR(xhci_regs)) {
|
|
+ dev_err(dwc->dev, "Failed to ioremap xhci_regs\n");
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ op_regs_base = HC_LENGTH(readl(xhci_regs));
|
|
+ reg = readl(xhci_regs + XHCI_HCSPARAMS1);
|
|
+ port_num = HCS_MAX_PORTS(reg);
|
|
+
|
|
+ for (i = 1; i <= port_num; i++) {
|
|
+ offset = op_regs_base + XHCI_PORTSC_BASE + 0x10*(i-1);
|
|
+ reg = readl(xhci_regs + offset);
|
|
+ reg &= ~PORT_POWER;
|
|
+ writel(reg, xhci_regs + offset);
|
|
+ }
|
|
+
|
|
+ iounmap(xhci_regs);
|
|
+ } else
|
|
+ dev_err(dwc->dev, "xhci base reg invalid\n");
|
|
+}
|
|
+
|
|
static int dwc3_host_get_irq(struct dwc3 *dwc)
|
|
{
|
|
struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
|
|
@@ -50,6 +91,13 @@ int dwc3_host_init(struct dwc3 *dwc)
|
|
struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
|
|
int prop_idx = 0;
|
|
|
|
+ /*
|
|
+ * We have to power off all Root hub ports immediately after DWC3 set
|
|
+ * to host mode to avoid VBUS glitch happen when xhci get reset later.
|
|
+ */
|
|
+ if (dwc->host_vbus_glitches)
|
|
+ dwc3_power_off_all_roothub_ports(dwc);
|
|
+
|
|
irq = dwc3_host_get_irq(dwc);
|
|
if (irq < 0)
|
|
return irq;
|