David Bauer 5cd9b50d69 ath79: add support for devolo WiFi pro 1750x ... Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) WiFi2: QCA9558 3T3R WiFi5: QCA9880 3T3R BTN: 1x Reset LED: 1x LED Power (non-controllable) 1x LED Status (internal) 1x LED LAN (controlled by PHY) 1x LED WLAN BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad) Header is located next to external-LED header. Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password the one set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit cb3cd52694)		2019-07-21 13:09:45 +02:00
..
board.d	ath79: add support for devolo WiFi pro 1750x	2019-07-21 13:09:45 +02:00
hotplug.d	ath79: add support for devolo WiFi pro 1750x	2019-07-21 13:09:45 +02:00
uci-defaults	ath79: add leds migrations for archer-c7-v2 and v4	2019-05-31 11:21:22 +02:00