mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
b5f32064ed
Qualcomm Atheros IPQ807x is a modern WiSoC featuring: * Quad Core ARMv8 Cortex A-53 * @ 2.2 GHz (IPQ8072A/4A/6A/8A) Codename Hawkeye * @ 1.4 GHz (IPQ8070A/1A) Codename Acorn * Dual Band simultaneaous IEEE 802.11ax * 5G: 8x8/80 or 4x4/160MHz (IPQ8074A/8A) * 5G: 4x4/80 or 2x2/160MHz (IPQ8071A/2A/6A) * 5G: 2x2/80MHz (IPQ8070A) * 2G: 4x4/40MHz (IPQ8072A/4A/6A/8A) * 2G: 2x2/40MHz (IPQ8070A/1A) * 1x PSGMII via QCA8072/5 (Max 5x 1GbE ports) * 2x SGMII/USXGMII (1/2.5/5/10 GbE) on Hawkeye * 2x SGMII/USXGMII (1/2.5/5 GbE) on Acorn * DDR3L/4 32/16 bit up to 2400MT/s * SDIO 3.0/SD card 3.0/eMMC 5.1 * Dual USB 3.0 * One PCIe Gen2.1 and one PCIe Gen3.0 port (Single lane) * Parallel NAND (ONFI)/LCD * 6x QUP BLSP SPI/I2C/UART * I2S, PCM, and TDMA * HW PWM * 1.8V configurable GPIO * Companion PMP8074 PMIC via SPMI (GPIOS, RTC etc) Note that only v2 SOC models aka the ones ending with A suffix are supported, v1 models do not comply to the final 802.11ax and have lower clocks, lack the Gen3 PCIe etc. SoC itself has two UBI32 cores for the NSS offloading system, however currently no offloading is supported. Signed-off-by: Robert Marko <robimarko@gmail.com>
25 lines
788 B
Diff
25 lines
788 B
Diff
From a4748d2850783d36f77ccf2b5fcc86ccf1800ef1 Mon Sep 17 00:00:00 2001
|
|
From: Robert Marko <robimarko@gmail.com>
|
|
Date: Wed, 16 Nov 2022 22:48:36 +0100
|
|
Subject: [PATCH] arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed
|
|
|
|
Add the generic 'max-link-speed' property to describe the Gen2 PCIe link
|
|
generation limit.
|
|
This allows the generic DWC code to configure the link speed correctly.
|
|
|
|
Signed-off-by: Robert Marko <robimarko@gmail.com>
|
|
---
|
|
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 +
|
|
1 file changed, 1 insertion(+)
|
|
|
|
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
|
|
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
|
|
@@ -801,6 +801,7 @@
|
|
linux,pci-domain = <1>;
|
|
bus-range = <0x00 0xff>;
|
|
num-lanes = <1>;
|
|
+ max-link-speed = <2>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|