mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
ee8df790ca
This commit adds OpenWrt U-Boot (UBI) layout support for MERCUSYS MR90X v1. Stock U-Boot UBI size: 50 MiB OpenWrt U-boot UBI size: 126 MiB Install ------- 1. Perform steps 1-14 of the OpenWrt installation guide (use OpenWrt initramfs-recovery.itb instead of initramfs-kernel.bin at the step 10, 12 and 14). Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation 2. Make backups: ``` cat /dev/mtd0 > /tmp/boot.bin cat /dev/mtd5 > /tmp/tp_data.bin ``` Copy /tp_data dir content, /tmp/boot.bin and /tmp/tp_data.bin and to your PC using scp. You can also backup the remaining partititons. Copy backups to a safe place, they are required for the next steps and stock firmware recovery. 3. Reboot to OpenWrt initramfs: ``` reboot ``` 4. Copy OpenWrt ubi-bl31-uboot.fip, ubi-preloader.bin, ubi-squashfs-sysupgrade.itb and MT7986_EEPROM.bin, default-mac (from /tp_data backup) to the /tmp folder of the router using scp. 5. Prepare UBI: ``` ubidetach -p /dev/mtd3; ubiformat /dev/mtd3 -y; ubiattach -p /dev/mtd3 ubimkvol /dev/ubi0 -N fip -t static -s 1MiB ubiupdatevol /dev/ubi0_0 /tmp/ubi-bl31-uboot.fip ubimkvol /dev/ubi0 -N ubootenv -s 0x1f000 ubimkvol /dev/ubi0 -N ubootenv2 -s 0x1f000 ``` 6. Install kmod-mtd-rw and unlock partitions: ``` opkg update && opkg install kmod-mtd-rw insmod mtd-rw i_want_a_brick=1 mtd unlock boot mtd unlock bl2 mtd unlock factory ``` 7. Prepare "factory" partition: ``` dd if=/dev/zero bs=$((0x8000)) count=1 | tr '\000' '\377' > /tmp/factory.bin dd if=/tmp/MT7986_EEPROM.bin of=/tmp/factory.bin conv=notrunc dd if=/tmp/default-mac >> /tmp/factory.bin ``` 8. Write "factory" partition: ``` mtd erase factory mtd write /tmp/factory.bin factory ``` 9. Write preloader partition: ``` mtd erase bl2 mtd write /tmp/ubi-preloader.bin bl2 ``` 10. Write OpenWrt sysupgrade image: ``` sysupgrade -n /tmp/ubi-squashfs-sysupgrade.itb ``` Recovery -------- 1. Place OpenWrt initramfs-recovery.itb image (with original name) on the tftp server (IP: 192.168.1.254). 2. Press "reset" button and power on the router. After ~10 sec release the button. 3. Use OpenWrt initramfs system for recovery. BL2 and FIP recovery -------------------- Use mtk_uartboot and UART connetion if BL2 or FIP in UBI is destroyed: Link: https://github.com/981213/mtk_uartboot Link: https://openwrt.org/toh/mercusys/mr90x_v1#serial Return to stock: ---------------- 1. Copy "boot" partition backup (boot.bin) to the /tmp dir of the router using scp. 2. Install kmod-mtd-rw: ``` opkg update && opkg install kmod-mtd-rw ``` 3. Restore stock U-Boot: ``` insmod mtd-rw i_want_a_brick=1 mtd unlock boot mtd erase boot mtd write /tmp/boot.bin boot ``` 4. Erase UBI and reboot: ``` mtd erase ubi reboot ``` 5. Open U-Boot web recovery, upload stock firmware image and start upgrade. Link: http://192.168.1.1 6. Complete steps 1-9 of the OpenWrt installation guide to get root rights. Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation 7. Upload "tp_data" partition backup (tp_data.bin) to the /tmp folder of the router using scp. 8. Restore stock calibrations: ``` mtd write /tmp/tp_data.bin tp_data reboot ``` 9. Perform "factory restore" via stock firmware web interface. Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16744 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
45 lines
701 B
Plaintext
45 lines
701 B
Plaintext
// SPDX-License-Identifier: (GL-2.0 OR MIT)
|
|
|
|
#include "mt7986b-mercusys-mr90x-v1-common.dtsi"
|
|
|
|
/ {
|
|
compatible = "mercusys,mr90x-v1", "mediatek,mt7986b";
|
|
model = "MERCUSYS MR90X v1";
|
|
};
|
|
|
|
&partitions {
|
|
partition@0 {
|
|
label = "boot";
|
|
reg = <0x0 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "u-boot-env";
|
|
reg = <0x200000 0x100000>;
|
|
};
|
|
|
|
partition@300000 {
|
|
label = "ubi0";
|
|
reg = <0x300000 0x3200000>;
|
|
};
|
|
|
|
partition@3500000 {
|
|
label = "ubi1";
|
|
reg = <0x3500000 0x3200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@6700000 {
|
|
label = "userconfig";
|
|
reg = <0x6700000 0x800000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@6f00000 {
|
|
label = "tp_data";
|
|
reg = <0x6f00000 0x400000>;
|
|
read-only;
|
|
};
|
|
};
|