mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
5acfe55d71
Change dnsmasq's dnssec time check handling to use time validity indicated by ntpd rather than maintaining a cross boot/upgrade /etc/dnsmasq.time timestamp file. This saves flash device wear. If ntpd client is configured in uci and you're using dnssec, then dnsmasq will not check dnssec timestamp validity until ntpd hotplug indicates sync via a stratum change. The ntpd hotplug leaves a status flag file to indicate to dnsmasq.init that time is valid and that it should now start in 'check dnssec timestamp valid' mode. If ntpd client is not configured and you're using dnssec, then it is presumed you're using an alternate time sync mechanism and that time is correct, thus dnsmasq checks dnssec timestamps are valid from 1st start. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> V2 - stratum & step ntp changes indicate time is valid V3 - on initial flag file step signal dnsmasq with SIGHUP if running V4 - only accept step ntp changes. Accepting both stratum & step could result in unpleasant script race conditions V5 - Actually only accepting stratum is the correct thing to do after further testing V6 - improve handling of non busybox ntpd if sysntpd not executable dnsmasq checks dnssec timestamps else sysntp script disabled - look for timestamp file - allows external mechanism to use hotplug flag file sysntp script enabled & uci ntp enabled - look for timestamp file sysntp script enabled & uci ntp disabled - dnsmasq checks dnssec timestamps fi
732 lines
18 KiB
Bash
732 lines
18 KiB
Bash
#!/bin/sh /etc/rc.common
|
|
# Copyright (C) 2007-2012 OpenWrt.org
|
|
|
|
START=60
|
|
|
|
USE_PROCD=1
|
|
PROG=/usr/sbin/dnsmasq
|
|
|
|
DNS_SERVERS=""
|
|
DOMAIN=""
|
|
|
|
ADD_LOCAL_DOMAIN=1
|
|
ADD_LOCAL_HOSTNAME=1
|
|
|
|
CONFIGFILE="/var/etc/dnsmasq.conf"
|
|
HOSTFILE="/tmp/hosts/dhcp"
|
|
TRUSTANCHORSFILE="/usr/share/dnsmasq/trust-anchors.conf"
|
|
TIMESTAMPFILE="/etc/dnsmasq.time"
|
|
TIMEVALIDFILE="/var/state/dnsmasqsec"
|
|
|
|
xappend() {
|
|
local value="$1"
|
|
|
|
echo "${value#--}" >> $CONFIGFILE
|
|
}
|
|
|
|
hex_to_hostid() {
|
|
local var="$1"
|
|
local hex="${2#0x}" # strip optional "0x" prefix
|
|
|
|
if [ -n "${hex//[0-9a-fA-F]/}" ]; then
|
|
# is invalid hex literal
|
|
return 1
|
|
fi
|
|
|
|
# convert into host id
|
|
export "$var=$(
|
|
printf "%0x:%0x" \
|
|
$(((0x$hex >> 16) % 65536)) \
|
|
$(( 0x$hex % 256))
|
|
)"
|
|
|
|
return 0
|
|
}
|
|
|
|
dhcp_calc() {
|
|
local ip="$1"
|
|
local res=0
|
|
|
|
while [ -n "$ip" ]; do
|
|
part="${ip%%.*}"
|
|
res="$(($res * 256))"
|
|
res="$(($res + $part))"
|
|
[ "${ip%.*}" != "$ip" ] && ip="${ip#*.}" || ip=
|
|
done
|
|
echo "$res"
|
|
}
|
|
|
|
dhcp_check() {
|
|
local ifname="$1"
|
|
local stamp="/var/run/dnsmasq.$ifname.dhcp"
|
|
local rv=0
|
|
|
|
[ -s "$stamp" ] && return $(cat "$stamp")
|
|
|
|
udhcpc -n -q -s /bin/true -t 1 -i "$ifname" >&- && rv=1 || rv=0
|
|
|
|
[ $rv -eq 1 ] && \
|
|
logger -t dnsmasq \
|
|
"found already running DHCP-server on interface '$ifname'" \
|
|
"refusing to start, use 'option force 1' to override"
|
|
|
|
echo $rv > "$stamp"
|
|
return $rv
|
|
}
|
|
|
|
log_once() {
|
|
pidof dnsmasq >/dev/null || \
|
|
logger -t dnsmasq "$@"
|
|
}
|
|
|
|
append_bool() {
|
|
local section="$1"
|
|
local option="$2"
|
|
local value="$3"
|
|
local _loctmp
|
|
config_get_bool _loctmp "$section" "$option" 0
|
|
[ $_loctmp -gt 0 ] && xappend "$value"
|
|
}
|
|
|
|
append_parm() {
|
|
local section="$1"
|
|
local option="$2"
|
|
local switch="$3"
|
|
local default="$4"
|
|
local _loctmp
|
|
config_get _loctmp "$section" "$option" "$default"
|
|
[ -z "$_loctmp" ] && return 0
|
|
xappend "$switch=$_loctmp"
|
|
}
|
|
|
|
append_server() {
|
|
xappend "--server=$1"
|
|
}
|
|
|
|
append_address() {
|
|
xappend "--address=$1"
|
|
}
|
|
|
|
append_ipset() {
|
|
xappend "--ipset=$1"
|
|
}
|
|
|
|
append_interface() {
|
|
local ifname=$(uci_get_state network "$1" ifname "$1")
|
|
xappend "--interface=$ifname"
|
|
}
|
|
|
|
append_notinterface() {
|
|
local ifname=$(uci_get_state network "$1" ifname "$1")
|
|
xappend "--except-interface=$ifname"
|
|
}
|
|
|
|
append_addnhosts() {
|
|
xappend "--addn-hosts=$1"
|
|
}
|
|
|
|
append_bogusnxdomain() {
|
|
xappend "--bogus-nxdomain=$1"
|
|
}
|
|
|
|
append_pxe_service() {
|
|
xappend "--pxe-service=$1"
|
|
}
|
|
|
|
dnsmasq() {
|
|
local cfg="$1"
|
|
append_bool "$cfg" authoritative "--dhcp-authoritative"
|
|
append_bool "$cfg" nodaemon "--no-daemon"
|
|
append_bool "$cfg" domainneeded "--domain-needed"
|
|
append_bool "$cfg" filterwin2k "--filterwin2k"
|
|
append_bool "$cfg" nohosts "--no-hosts"
|
|
append_bool "$cfg" nonegcache "--no-negcache"
|
|
append_bool "$cfg" strictorder "--strict-order"
|
|
append_bool "$cfg" logqueries "--log-queries=extra"
|
|
append_bool "$cfg" noresolv "--no-resolv"
|
|
append_bool "$cfg" localise_queries "--localise-queries"
|
|
append_bool "$cfg" readethers "--read-ethers"
|
|
append_bool "$cfg" dbus "--enable-dbus"
|
|
append_bool "$cfg" boguspriv "--bogus-priv"
|
|
append_bool "$cfg" expandhosts "--expand-hosts"
|
|
config_get tftp_root "$cfg" "tftp_root"
|
|
[ -d "$tftp_root" ] && append_bool "$cfg" enable_tftp "--enable-tftp"
|
|
append_bool "$cfg" tftp_no_fail "--tftp-no-fail"
|
|
append_bool "$cfg" nonwildcard "--bind-dynamic"
|
|
append_bool "$cfg" fqdn "--dhcp-fqdn"
|
|
append_bool "$cfg" proxydnssec "--proxy-dnssec"
|
|
append_bool "$cfg" localservice "--local-service"
|
|
append_bool "$cfg" quietdhcp "--quiet-dhcp"
|
|
append_bool "$cfg" sequential_ip "--dhcp-sequential-ip"
|
|
append_bool "$cfg" allservers "--all-servers"
|
|
append_bool "$cfg" noping "--no-ping"
|
|
|
|
append_parm "$cfg" dhcpscript "--dhcp-script"
|
|
append_parm "$cfg" cachesize "--cache-size"
|
|
append_parm "$cfg" dnsforwardmax "--dns-forward-max"
|
|
append_parm "$cfg" port "--port"
|
|
append_parm "$cfg" ednspacket_max "--edns-packet-max"
|
|
append_parm "$cfg" dhcpleasemax "--dhcp-lease-max"
|
|
append_parm "$cfg" "queryport" "--query-port"
|
|
append_parm "$cfg" "minport" "--min-port"
|
|
append_parm "$cfg" "maxport" "--max-port"
|
|
append_parm "$cfg" "domain" "--domain"
|
|
append_parm "$cfg" "local" "--server"
|
|
config_list_foreach "$cfg" "server" append_server
|
|
config_list_foreach "$cfg" "address" append_address
|
|
config_list_foreach "$cfg" "ipset" append_ipset
|
|
config_list_foreach "$cfg" "interface" append_interface
|
|
config_list_foreach "$cfg" "notinterface" append_notinterface
|
|
config_list_foreach "$cfg" "addnhosts" append_addnhosts
|
|
config_list_foreach "$cfg" "bogusnxdomain" append_bogusnxdomain
|
|
append_parm "$cfg" "leasefile" "--dhcp-leasefile" "/tmp/dhcp.leases"
|
|
append_parm "$cfg" "resolvfile" "--resolv-file" "/tmp/resolv.conf.auto"
|
|
append_parm "$cfg" "serversfile" "--servers-file"
|
|
append_parm "$cfg" "tftp_root" "--tftp-root"
|
|
append_parm "$cfg" "dhcp_boot" "--dhcp-boot"
|
|
append_parm "$cfg" "local_ttl" "--local-ttl"
|
|
append_parm "$cfg" "pxe_prompt" "--pxe-prompt"
|
|
config_list_foreach "$cfg" "pxe_service" append_pxe_service
|
|
config_get DOMAIN "$cfg" domain
|
|
|
|
config_get_bool ADD_LOCAL_DOMAIN "$cfg" add_local_domain 1
|
|
config_get_bool ADD_LOCAL_HOSTNAME "$cfg" add_local_hostname 1
|
|
|
|
config_get_bool readethers "$cfg" readethers
|
|
[ "$readethers" = "1" -a \! -e "/etc/ethers" ] && touch /etc/ethers
|
|
|
|
config_get leasefile $cfg leasefile "/tmp/dhcp.leases"
|
|
[ -n "$leasefile" -a \! -e "$leasefile" ] && touch "$leasefile"
|
|
config_get_bool cachelocal "$cfg" cachelocal 1
|
|
|
|
config_get_bool noresolv "$cfg" noresolv 0
|
|
if [ "$noresolv" != "1" ]; then
|
|
config_get resolvfile "$cfg" resolvfile "/tmp/resolv.conf.auto"
|
|
# So jail doesn't complain if file missing
|
|
[ -n "$resolvfile" -a \! -e "$resolvfile" ] && touch "$resolvfile"
|
|
fi
|
|
|
|
config_get hostsfile "$cfg" dhcphostsfile
|
|
[ -e "$hostsfile" ] && xappend "--dhcp-hostsfile=$hostsfile"
|
|
|
|
local rebind
|
|
config_get_bool rebind "$cfg" rebind_protection 1
|
|
[ $rebind -gt 0 ] && {
|
|
log_once \
|
|
"DNS rebinding protection is active," \
|
|
"will discard upstream RFC1918 responses!"
|
|
xappend "--stop-dns-rebind"
|
|
|
|
local rebind_localhost
|
|
config_get_bool rebind_localhost "$cfg" rebind_localhost 0
|
|
[ $rebind_localhost -gt 0 ] && {
|
|
log_once "Allowing 127.0.0.0/8 responses"
|
|
xappend "--rebind-localhost-ok"
|
|
}
|
|
|
|
append_rebind_domain() {
|
|
log_once "Allowing RFC1918 responses for domain $1"
|
|
xappend "--rebind-domain-ok=$1"
|
|
}
|
|
|
|
config_list_foreach "$cfg" rebind_domain append_rebind_domain
|
|
}
|
|
|
|
config_get_bool dnssec "$cfg" dnssec 0
|
|
[ "$dnssec" -gt 0 ] && {
|
|
xappend "--conf-file=$TRUSTANCHORSFILE"
|
|
xappend "--dnssec"
|
|
[ -x /etc/init.d/sysntpd ] && {
|
|
/etc/init.d/sysntpd enabled
|
|
[ "$?" -ne 0 -o "$(uci_get system.ntp.enabled)" = "1" ] && {
|
|
[ -f "$TIMEVALIDFILE" ] || xappend "--dnssec-no-timecheck"
|
|
}
|
|
}
|
|
append_bool "$cfg" dnsseccheckunsigned "--dnssec-check-unsigned"
|
|
}
|
|
|
|
dhcp_option_add "$cfg" "" 0
|
|
|
|
xappend "--dhcp-broadcast=tag:needs-broadcast"
|
|
|
|
mkdir -p /tmp/hosts /tmp/dnsmasq.d
|
|
xappend "--addn-hosts=/tmp/hosts"
|
|
xappend "--conf-dir=/tmp/dnsmasq.d"
|
|
xappend "--user=dnsmasq"
|
|
xappend "--group=dnsmasq"
|
|
|
|
echo >> $CONFIGFILE
|
|
|
|
config_get_bool enable_tftp "$cfg" enable_tftp 0
|
|
[ "$enable_tftp" -gt 0 ] && {
|
|
config_get tftp_root "$cfg" tftp_root
|
|
append EXTRA_MOUNT $tftp_root
|
|
}
|
|
}
|
|
|
|
dhcp_subscrid_add() {
|
|
local cfg="$1"
|
|
|
|
config_get networkid "$cfg" networkid
|
|
[ -n "$networkid" ] || return 0
|
|
|
|
config_get subscriberid "$cfg" subscriberid
|
|
[ -n "$subscriberid" ] || return 0
|
|
|
|
xappend "--dhcp-subscrid=$networkid,$subscriberid"
|
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
dhcp_option_add "$cfg" "$networkid" "$force"
|
|
}
|
|
|
|
dhcp_remoteid_add() {
|
|
local cfg="$1"
|
|
|
|
config_get networkid "$cfg" networkid
|
|
[ -n "$networkid" ] || return 0
|
|
|
|
config_get remoteid "$cfg" remoteid
|
|
[ -n "$remoteid" ] || return 0
|
|
|
|
xappend "--dhcp-remoteid=$networkid,$remoteid"
|
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
dhcp_option_add "$cfg" "$networkid" "$force"
|
|
}
|
|
|
|
dhcp_circuitid_add() {
|
|
local cfg="$1"
|
|
|
|
config_get networkid "$cfg" networkid
|
|
[ -n "$networkid" ] || return 0
|
|
|
|
config_get circuitid "$cfg" circuitid
|
|
[ -n "$circuitid" ] || return 0
|
|
|
|
xappend "--dhcp-circuitid=$networkid,$circuitid"
|
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
dhcp_option_add "$cfg" "$networkid" "$force"
|
|
}
|
|
|
|
dhcp_userclass_add() {
|
|
local cfg="$1"
|
|
|
|
config_get networkid "$cfg" networkid
|
|
[ -n "$networkid" ] || return 0
|
|
|
|
config_get userclass "$cfg" userclass
|
|
[ -n "$userclass" ] || return 0
|
|
|
|
xappend "--dhcp-userclass=$networkid,$userclass"
|
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
dhcp_option_add "$cfg" "$networkid" "$force"
|
|
}
|
|
|
|
dhcp_vendorclass_add() {
|
|
local cfg="$1"
|
|
|
|
config_get networkid "$cfg" networkid
|
|
[ -n "$networkid" ] || return 0
|
|
|
|
config_get vendorclass "$cfg" vendorclass
|
|
[ -n "$vendorclass" ] || return 0
|
|
|
|
xappend "--dhcp-vendorclass=$networkid,$vendorclass"
|
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
dhcp_option_add "$cfg" "$networkid" "$force"
|
|
}
|
|
|
|
dhcp_host_add() {
|
|
local cfg="$1"
|
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
config_get networkid "$cfg" networkid
|
|
[ -n "$networkid" ] && dhcp_option_add "$cfg" "$networkid" "$force"
|
|
|
|
config_get_bool enable "$cfg" enable 1
|
|
[ "$enable" = "0" ] && return 0
|
|
|
|
config_get name "$cfg" name
|
|
config_get ip "$cfg" ip
|
|
[ -n "$ip" -o -n "$name" ] || return 0
|
|
|
|
config_get_bool dns "$cfg" dns 0
|
|
[ "$dns" = "1" -a -n "$ip" -a -n "$name" ] && {
|
|
echo "$ip $name${DOMAIN:+.$DOMAIN}" >> $HOSTFILE
|
|
}
|
|
|
|
config_get mac "$cfg" mac
|
|
if [ -n "$mac" ]; then
|
|
# --dhcp-host=00:20:e0:3b:13:af,192.168.0.199,lap
|
|
macs=""
|
|
for m in $mac; do append macs "$m" ","; done
|
|
else
|
|
# --dhcp-host=lap,192.168.0.199
|
|
[ -n "$name" ] || return 0
|
|
macs="$name"
|
|
name=""
|
|
fi
|
|
|
|
config_get tag "$cfg" tag
|
|
|
|
if [ "$DHCPv6CAPABLE" -eq 1 ]; then
|
|
config_get hostid "$cfg" hostid
|
|
if [ -n "$hostid" ]; then
|
|
hex_to_hostid hostid "$hostid"
|
|
fi
|
|
fi
|
|
|
|
config_get_bool broadcast "$cfg" broadcast 0
|
|
[ "$broadcast" = "0" ] && broadcast=
|
|
|
|
config_get leasetime "$cfg" leasetime
|
|
|
|
xappend "--dhcp-host=$macs${networkid:+,net:$networkid}${broadcast:+,set:needs-broadcast}${tag:+,set:$tag}${ip:+,$ip${hostid:+,[::$hostid]}}${name:+,$name}${leasetime:+,$leasetime}"
|
|
}
|
|
|
|
dhcp_tag_add() {
|
|
local cfg="$1"
|
|
|
|
tag="$cfg"
|
|
|
|
[ -n "$tag" ] || return 0
|
|
|
|
config_get_bool force "$cfg" force 0
|
|
[ "$force" = "0" ] && force=
|
|
|
|
config_get option "$cfg" dhcp_option
|
|
for o in $option; do
|
|
xappend "--dhcp-option${force:+-force}=tag:$tag,$o"
|
|
done
|
|
}
|
|
|
|
dhcp_mac_add() {
|
|
local cfg="$1"
|
|
|
|
config_get networkid "$cfg" networkid
|
|
[ -n "$networkid" ] || return 0
|
|
|
|
config_get mac "$cfg" mac
|
|
[ -n "$mac" ] || return 0
|
|
|
|
xappend "--dhcp-mac=$networkid,$mac"
|
|
|
|
dhcp_option_add "$cfg" "$networkid"
|
|
}
|
|
|
|
dhcp_boot_add() {
|
|
local cfg="$1"
|
|
|
|
config_get networkid "$cfg" networkid
|
|
|
|
config_get filename "$cfg" filename
|
|
[ -n "$filename" ] || return 0
|
|
|
|
config_get servername "$cfg" servername
|
|
config_get serveraddress "$cfg" serveraddress
|
|
|
|
[ -n "$serveraddress" -a ! -n "$servername" ] && return 0
|
|
|
|
xappend "--dhcp-boot=${networkid:+net:$networkid,}${filename}${servername:+,$servername}${serveraddress:+,$serveraddress}"
|
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
dhcp_option_add "$cfg" "$networkid" "$force"
|
|
}
|
|
|
|
|
|
dhcp_add() {
|
|
local cfg="$1"
|
|
config_get net "$cfg" interface
|
|
[ -n "$net" ] || return 0
|
|
|
|
config_get dhcpv4 "$cfg" dhcpv4
|
|
[ "$dhcpv4" != "disabled" ] || return 0
|
|
|
|
config_get networkid "$cfg" networkid
|
|
[ -n "$networkid" ] || networkid="$net"
|
|
|
|
network_get_subnet subnet "$net" || return 0
|
|
network_get_device ifname "$net" || return 0
|
|
network_get_protocol proto "$net" || return 0
|
|
|
|
[ "$cachelocal" = "0" ] && network_get_dnsserver dnsserver "$net" && {
|
|
DNS_SERVERS="$DNS_SERVERS $dnsserver"
|
|
}
|
|
|
|
append_bool "$cfg" ignore "--no-dhcp-interface=$ifname" && return 0
|
|
|
|
# Do not support non-static interfaces for now
|
|
[ static = "$proto" ] || return 0
|
|
|
|
# Override interface netmask with dhcp config if applicable
|
|
config_get netmask "$cfg" netmask "${subnet##*/}"
|
|
|
|
#check for an already active dhcp server on the interface, unless 'force' is set
|
|
config_get_bool force "$cfg" force 0
|
|
[ $force -gt 0 ] || dhcp_check "$ifname" || return 0
|
|
|
|
config_get start "$cfg" start
|
|
config_get limit "$cfg" limit
|
|
config_get leasetime "$cfg" leasetime
|
|
config_get options "$cfg" options
|
|
config_get_bool dynamicdhcp "$cfg" dynamicdhcp 1
|
|
|
|
leasetime="${leasetime:-12h}"
|
|
start="$(dhcp_calc "${start:-100}")"
|
|
limit="${limit:-150}"
|
|
[ "$limit" -gt 0 ] && limit=$((limit-1))
|
|
eval "$(ipcalc.sh "${subnet%%/*}" $netmask $start $limit)"
|
|
if [ "$dynamicdhcp" = "0" ]; then END="static"; fi
|
|
xappend "--dhcp-range=$networkid,$START,$END,$NETMASK,$leasetime${options:+ $options}"
|
|
|
|
dhcp_option_add "$cfg" "$networkid"
|
|
}
|
|
|
|
dhcp_option_add() {
|
|
local cfg="$1"
|
|
local networkid="$2"
|
|
local force="$3"
|
|
|
|
[ "$force" = "0" ] && force=
|
|
|
|
config_get dhcp_option "$cfg" dhcp_option
|
|
for o in $dhcp_option; do
|
|
xappend "--dhcp-option${force:+-force}=${networkid:+$networkid,}$o"
|
|
done
|
|
|
|
}
|
|
|
|
dhcp_domain_add() {
|
|
local cfg="$1"
|
|
local ip name names record
|
|
|
|
config_get names "$cfg" name "$2"
|
|
[ -n "$names" ] || return 0
|
|
|
|
config_get ip "$cfg" ip "$3"
|
|
[ -n "$ip" ] || return 0
|
|
|
|
for name in $names; do
|
|
record="${record:+$record }$name"
|
|
done
|
|
|
|
echo "$ip $record" >> $HOSTFILE
|
|
}
|
|
|
|
dhcp_srv_add() {
|
|
local cfg="$1"
|
|
|
|
config_get srv "$cfg" srv
|
|
[ -n "$srv" ] || return 0
|
|
|
|
config_get target "$cfg" target
|
|
[ -n "$target" ] || return 0
|
|
|
|
config_get port "$cfg" port
|
|
[ -n "$port" ] || return 0
|
|
|
|
config_get class "$cfg" class
|
|
config_get weight "$cfg" weight
|
|
|
|
local service="$srv,$target,$port${class:+,$class${weight:+,$weight}}"
|
|
|
|
xappend "--srv-host=$service"
|
|
}
|
|
|
|
dhcp_mx_add() {
|
|
local cfg="$1"
|
|
local domain relay pref
|
|
|
|
config_get domain "$cfg" domain
|
|
[ -n "$domain" ] || return 0
|
|
|
|
config_get relay "$cfg" relay
|
|
[ -n "$relay" ] || return 0
|
|
|
|
config_get pref "$cfg" pref 0
|
|
|
|
local service="$domain,$relay,$pref"
|
|
|
|
xappend "--mx-host=$service"
|
|
}
|
|
|
|
dhcp_cname_add() {
|
|
local cfg="$1"
|
|
local cname target
|
|
|
|
config_get cname "$cfg" cname
|
|
[ -n "$cname" ] || return 0
|
|
|
|
config_get target "$cfg" target
|
|
[ -n "$target" ] || return 0
|
|
|
|
xappend "--cname=${cname},${target}"
|
|
}
|
|
|
|
dhcp_hostrecord_add() {
|
|
local cfg="$1"
|
|
local names addresses record val
|
|
|
|
config_get names "$cfg" name "$2"
|
|
if [ -z "$names" ]; then
|
|
return 0
|
|
fi
|
|
|
|
config_get addresses "$cfg" ip "$3"
|
|
if [ -z "$addresses" ]; then
|
|
return 0
|
|
fi
|
|
|
|
for val in $names $addresses; do
|
|
record="${record:+$record,}$val"
|
|
done
|
|
|
|
xappend "--host-record=$record"
|
|
}
|
|
|
|
dhcp_relay_add() {
|
|
local cfg="$1"
|
|
local local_addr server_addr interface
|
|
|
|
config_get local_addr "$cfg" local_addr
|
|
[ -n "$local_addr" ] || return 0
|
|
|
|
config_get server_addr "$cfg" server_addr
|
|
[ -n "$server_addr" ] || return 0
|
|
|
|
config_get interface "$cfg" interface
|
|
if [ -z "$interface" ]; then
|
|
xappend "--dhcp-relay=$local_addr,$server_addr"
|
|
else
|
|
xappend "--dhcp-relay=$local_addr,$server_addr,$interface"
|
|
fi
|
|
}
|
|
|
|
service_triggers()
|
|
{
|
|
procd_add_reload_trigger "dhcp"
|
|
}
|
|
|
|
boot() {
|
|
# Will be launched through hotplug
|
|
return 0
|
|
}
|
|
|
|
start_service() {
|
|
include /lib/functions
|
|
|
|
config_load dhcp
|
|
|
|
# before we can call xappend
|
|
mkdir -p /var/run/dnsmasq/
|
|
mkdir -p $(dirname $CONFIGFILE)
|
|
mkdir -p /var/lib/misc
|
|
touch /tmp/dhcp.leases
|
|
|
|
[ -f "$TIMESTAMPFILE" ] && rm -f "$TIMESTAMPFILE"
|
|
|
|
echo "# auto-generated config file from /etc/config/dhcp" > $CONFIGFILE
|
|
echo "# auto-generated config file from /etc/config/dhcp" > $HOSTFILE
|
|
|
|
# if we did this last, we could override auto-generated config
|
|
[ -f /etc/dnsmasq.conf ] && {
|
|
xappend "--conf-file=/etc/dnsmasq.conf"
|
|
}
|
|
|
|
$PROG --version | grep -osqE "^Compile time options:.* DHCPv6( |$)" && DHCPv6CAPABLE=1 || DHCPv6CAPABLE=0
|
|
|
|
args=""
|
|
config_foreach dnsmasq dnsmasq
|
|
config_foreach dhcp_host_add host
|
|
echo >> $CONFIGFILE
|
|
config_foreach dhcp_boot_add boot
|
|
config_foreach dhcp_mac_add mac
|
|
config_foreach dhcp_tag_add tag
|
|
config_foreach dhcp_vendorclass_add vendorclass
|
|
config_foreach dhcp_userclass_add userclass
|
|
config_foreach dhcp_circuitid_add circuitid
|
|
config_foreach dhcp_remoteid_add remoteid
|
|
config_foreach dhcp_subscrid_add subscrid
|
|
config_foreach dhcp_domain_add domain
|
|
config_foreach dhcp_hostrecord_add hostrecord
|
|
config_foreach dhcp_relay_add relay
|
|
|
|
# add own hostname
|
|
[ $ADD_LOCAL_HOSTNAME -eq 1 ] && {
|
|
local lanaddr lanaddr6
|
|
local ulaprefix="$(uci_get network @globals[0] ula_prefix)"
|
|
local hostname="$(uci_get system @system[0] hostname Lede)"
|
|
|
|
network_get_ipaddr lanaddr "lan" && {
|
|
dhcp_domain_add "" "$hostname" "$lanaddr"
|
|
}
|
|
|
|
[ -n "$ulaprefix" ] && network_get_ipaddrs6 lanaddr6 "lan" && {
|
|
for lanaddr6 in $lanaddr6; do
|
|
case "$lanaddr6" in
|
|
"${ulaprefix%%:/*}"*)
|
|
dhcp_domain_add "" "$hostname" "$lanaddr6"
|
|
;;
|
|
esac
|
|
done
|
|
}
|
|
}
|
|
|
|
echo >> $CONFIGFILE
|
|
config_foreach dhcp_srv_add srvhost
|
|
config_foreach dhcp_mx_add mxhost
|
|
echo >> $CONFIGFILE
|
|
|
|
config_get odhcpd_is_active odhcpd maindhcp
|
|
if [ "$odhcpd_is_active" != "1" ]; then
|
|
config_foreach dhcp_add dhcp
|
|
fi
|
|
|
|
echo >> $CONFIGFILE
|
|
config_foreach dhcp_cname_add cname
|
|
echo >> $CONFIGFILE
|
|
|
|
rm -f /tmp/resolv.conf
|
|
[ $ADD_LOCAL_DOMAIN -eq 1 ] && [ -n "$DOMAIN" ] && {
|
|
echo "search $DOMAIN" >> /tmp/resolv.conf
|
|
}
|
|
DNS_SERVERS="$DNS_SERVERS 127.0.0.1"
|
|
for DNS_SERVER in $DNS_SERVERS ; do
|
|
echo "nameserver $DNS_SERVER" >> /tmp/resolv.conf
|
|
done
|
|
|
|
procd_open_instance
|
|
procd_set_param command $PROG -C $CONFIGFILE -k -x /var/run/dnsmasq/dnsmasq.pid
|
|
procd_set_param file $CONFIGFILE
|
|
procd_set_param respawn
|
|
|
|
procd_add_jail dnsmasq ubus log
|
|
procd_add_jail_mount $CONFIGFILE $TRUSTANCHORSFILE $HOSTFILE /etc/passwd /etc/group /etc/TZ /dev/null /dev/urandom /etc/dnsmasq.conf /tmp/dnsmasq.d /tmp/resolv.conf.auto /etc/hosts /etc/ethers $EXTRA_MOUNT
|
|
procd_add_jail_mount_rw /var/run/dnsmasq/ /tmp/dhcp.leases
|
|
|
|
procd_close_instance
|
|
}
|
|
|
|
reload_service() {
|
|
rc_procd start_service "$@"
|
|
return 0
|
|
}
|
|
|
|
stop_service() {
|
|
[ -f /tmp/resolv.conf ] && {
|
|
rm -f /tmp/resolv.conf
|
|
ln -s /tmp/resolv.conf.auto /tmp/resolv.conf
|
|
}
|
|
rm -f /var/run/dnsmasq.*.dhcp
|
|
}
|