openwrt/package/kernel
Sven Eckelmann 5913543190 ath10k-ct: adjust tx power reduction for US regulatory domain
FCC allows maximum antenna gain of 6 dBi. 15.247(b)(4):

> (4) The conducted output power limit
> specified in paragraph (b) of this section
> is based on the use of antennas
> with directional gains that do not exceed
> 6 dBi. Except as shown in paragraph
> (c) of this section, if transmitting
> antennas of directional gain greater
> than 6 dBi are used, the conducted
> output power from the intentional radiator
> shall be reduced below the stated
> values in paragraphs (b)(1), (b)(2),
> and (b)(3) of this section, as appropriate,
> by the amount in dB that the
> directional gain of the antenna exceeds
> 6 dBi.

https://www.gpo.gov/fdsys/pkg/CFR-2013-title47-vol1/pdf/CFR-2013-title47-vol1-sec15-247.pdf

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2019-06-15 00:40:25 +02:00
..
acx-mac80211 adm5120: Remove unmaintained target 2019-05-03 21:27:12 +02:00
ar7-atm ar7-atm: fix function signatures with expected ones 2017-10-29 23:41:00 +01:00
ath10k-ct ath10k-ct: adjust tx power reduction for US regulatory domain 2019-06-15 00:40:25 +02:00
avila-wdt build: use KERNEL_MAKE_FLAGS for kernel file compilations 2017-10-29 16:17:05 +01:00
brcm2708-gpu-fw brcm2708-gpu-fw: add fw required for camera module 2018-12-05 00:39:53 +02:00
broadcom-wl broadcom-wl: fix compilation with 4.14 2018-02-11 23:15:05 +01:00
button-hotplug button-hotplug: add KEY_POWER2 handling 2019-05-30 11:55:50 +02:00
cryptodev-linux cryptodev-linux: Update to 1.10 2019-01-12 19:09:43 +01:00
dtc/patches package: kernel: dtc: Add DTO support 2017-11-06 16:39:41 +01:00
gpio-button-hotplug gpio-button-hotplug: gpio-keys: fix always missing first event 2019-06-09 14:51:47 +02:00
gpio-nct5104d kernel: gpio-nct5104d remove boardname check 2018-07-12 08:51:27 +02:00
hwmon-gsc build: use KERNEL_MAKE_FLAGS for kernel file compilations 2017-10-29 16:17:05 +01:00
i2c-gpio-custom i2c-gpio-custom: Adapt to moved include file 2018-12-15 14:28:48 +01:00
kmod-sched-cake kernel: Remove support for kernel 3.18 2019-05-03 22:41:38 +02:00
lantiq ltq-atm/ltq-ptm: re-enable/fix reset_ppe() functionality for VR9 2019-03-10 16:49:31 +01:00
leds-apu2 kernel: leds-apu2 remove boardname check 2018-07-16 15:12:17 +02:00
linux netsupport: add xfrmi interface support 2019-06-09 21:48:22 +02:00
mac80211 mac80211: ath10k: adjust tx power reduction for US regulatory domain 2019-06-15 00:40:25 +02:00
mt76 kernel: Remove support for kernel 3.18 2019-05-03 22:41:38 +02:00
mwlwifi mwlwifi: Fix pcie timeout issue 2019-04-01 10:05:49 +02:00
nat46 nat46: Fix mirror hash 2019-02-07 11:15:11 +01:00
om-watchdog treewide: use the generic board_name function 2017-07-15 23:13:34 +02:00
rtc-rv5c386a build: use KERNEL_MAKE_FLAGS for kernel file compilations 2017-10-29 16:17:05 +01:00
rtl8812au-ct kernel: Remove support for kernel 3.18 2019-05-03 22:41:38 +02:00
spi-gpio-custom kernel: Deactivate *-gpio-custom drivers for 4.19 2018-12-15 14:28:48 +01:00
trelay trelay: Install hotplug and config files as 600 2018-09-19 09:41:28 +01:00
w1-gpio-custom kernel: Deactivate *-gpio-custom drivers for 4.19 2018-12-15 14:28:48 +01:00